• Journal of The Korean Society of Agricultural Engineers
• /
• v.50 no.1
• /
• pp.85-92
• /
• 2008

This study was carried out to estimate heavy metal loads at plain area of the rural watersheds during farming season in 2006. The experimental area was belonging to Geum River watershed. That was located at the center of South Korea. Water samples were corrected at two kinds of aspects. One is regular sampling(every two month) and the other is irregular sampling(every rainfall event). The result showed that heavy metal properties of regular samples were highest at May and June with lively agricultural activities. Heavy metal concentration of irregular samples was lower than that of regular samples. But the heavy metal loads of irregular samples were high. The correlation between each heavy metals of regular samples was following as Mn-Cd > Mn-Fe > Mn-Al > Fe-Al > Al-Cd. The correlation of irregular samples was following as Fe-AI > Zn-Mn > Fe-Cd > Cd-Al. Loading rates of daily discharge the plain area of designed rural watershed during farming season were Al 3.070 kg/day, Cu 0.526 kg/day, Fe 0.745 kg/day, Zn 0.314 kg/day, Cd 0.010 kg/day, Cr 0.055 kg/day, Mn 0.140 kg/day and Pb 0.098 kg/day. Loading rate of discharge with heavy metals during the survey period was Al(577.23 kg) > Fe(140.08 kg) > Cu(98.93 kg) > Zn(58.99 kg) > Mn(26.34 kg) > Pb(18.51 kg) > Cr(10.34 kg) > Cd(1.93 kg).

• Korean Journal of Plant Resources
• /
• v.27 no.4
• /
• pp.354-358
• /
• 2014

Field study was conducted to evaluate the agronomic effectiveness of sulphur-bentonite fertilizer. Soil pH was slightly lower tendency to the increase of sulphur-bentonite fertilization, but did not indicate a sharp decline in soil pH. The T-N contents in the $6kg/1000m^2$ plot was higher to 700 mg/kg and the organic matter content was 1.29% in the $3kg/1000m^2$ plot. The content of available-P was also increased to 289 mg/kg in the $6kg/1000m^2$ plot. The growth characteristics of the young radish (Raphanus sativus L.) has significantly more in $3kg/1000m^2$ plot on upper part, and more on under part in $6kg/1000m^2$ plot. Therefore, it is concluded that the application of sulphur-bentonite fertilizer was thought to be effective for the chemical characteristics of soil and crop growth enhancement.

• Journal of Climate Change Research
• /
• v.6 no.1
• /
• pp.41-47
• /
• 2015

This study was carried out simulating domestic utilization conditions of a wood pellet stove and a wood pellet boiler in order to determine emission factors (EFs) of macro-pollutants, i.e., carbon monoxide, nitrogen oxides, sulfur oxides, ammonia, particulate matters (total suspended particulate, $PM_{10}$, $PM_{2.5}$, black carbon) and trace pollutants (i.e., ten different volatile organic compounds). The composite pollutants EFs for the pellet stove were: for TSP 4.58 g/kg, for $PM_{10}$ 3.35 g/kg, for $PM_{2.5}$ 2.48 g/kg, CO 119.23 g/kg, NO 14.40 g/kg, $SO_2$ 0.17 g/kg, TVOC 37.73 g/kg, $NH_3$ 0.02 g/kg and emissions were similar to the pellet boiler appliance: for TSP 4.73 g/kg, for $PM_{10}$ 3.41 g/kg, for $PM_{2.5}$ 2.63 g/kg, CO 161.51 g/kg, NO 13.67 g/kg, $SO_2$ 0.19 g/kg, TVOC 45.22 g/kg, $NH_3$ 0.02 g/kg.

• Journal of Climate Change Research
• /
• v.6 no.1
• /
• pp.49-54
• /
• 2015

Manually fed firewood burning appliances, i.e., stove and boiler, were tested in order to determine emission factors (EFs) of macro-pollutants, i.e., carbon monoxide, nitrogen oxides, sulfur oxides, ammonia, particulate matters (total suspended particulate, $PM_{10}$, $PM_{2.5}$, black carbon) and trace pollutants (i.e., ten different volatile organic compounds). The composite pollutants EFs for the wood stove were: for TSP 15.45 g/kg, for $PM_{10}$ 6.53 g/kg, $PM_{2.5}$ 4.16 g/kg, CO 175.49 g/kg, NO 1.58 g/kg, $SO_2$ 0.15 g/kg, TVOC 48.02 g/kg, $NH_3$ 0.02 g/kg and emissions were similar to the wood boiler appliance: for TSP 12.23 g/kg, for $PM_{10}$ 5.84 g/kg, $PM_{2.5}$ 3.66 g/kg, CO 146.74 g/kg, NO 1.42 g/kg, $SO_2$ 0.15 g/kg, TVOC 47.78 g/kg, $NH_3$ 0.01 g/kg.

• Analytical Science and Technology
• /
• v.21 no.1
• /
• pp.53-57
• /
• 2008

In order to survey the contents of ethyl carbamate in alcoholic beverages, GC/MS-SIM method was used after extraction with dichloromethane in solid phase extract cartridge contained alcoholic beverages. In the applied GC/MS-SIM method, the values of recoveries and relative standard deviation were ranged from 85.2 % to 87.9 % and from 0.7 % to 1.9 %, the limit of detection and quantification were $2{\mu}g/kg$ and $10{\mu}g/kg$. Depending on alcoholic beverage kinds, the levels were variable and the average level was $194{\mu}g/kg$ for liquor, $105{\mu}g/kg$ for fruit wine, $62{\mu}g/kg$ distilled spirit, $28{\mu}g/kg$ for sake, $15{\mu}g/kg$ for yakju, $12{\mu}g/kg$ for other alcohol beverages, ND for soju, respectively.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.15 no.3
• /
• pp.175-185
• /
• 1995

This experiment was carried out to investigate the optimum rates of animal excreta(cattle slurry-N) for the highest dry matter production and improve the nutritive values of reed canarygrass with different cutting frequency. The results are summarized as follows; The highest relative dry matter yields for annual dry matter yield were 42.2% and 45.2% at 3rd cut in 3 and 4 cuttings, and 34.7% at 4th cut in 5 cuttings, respectively. The annual dry matter yields of non slurry-N application plot showed were from 6.8 tons to 8.0 tons/ha in all cutting frequencies. The highest annual dry matter yield obtained was in 3 cuttings. The annual dry matter yield increased with an increase of applied rates of slurry-N in all cutting frequencies. Annual dry matter yield was produced by 3.3 tons/ha at rates of 90 kg N/ha/cut in 3 cuttings, and more 1.7 tonsha and 2.4 tons/ha at rates of 30 kg N/ha/cut in 4 and 5 cuttings than that of non slurry-N application plots. The contents of crude protein were 12.01% and 15.0% at rates of 90 kg N/ha/cut in 3 and 4 cuttings, and 16.59% at rates of 120 kg N/ha/cut in 5 cuttings, respectively. On the contrary, the content of acid detergent fibre(ADF) showed the lowest values at same rates of slurry-N application in each cutting. J. The average content of crude protein was significantly increased with cutting frequencies, and they were 11.43%, 13.53% and 15.53% in 3, 4 and 5 cuttings, respectively. The average contents of acid detergent fibre(ADF) were 40.27%, 40.53% and 37.06% in 3, 4 and 5 cuttings. The values of 5 cuttings were significantly lower than other cutting frequencies, but the values of acid detergent fibre(ADF) was not significantly different between 3 and 4 cuttings. 6. The efficiency of dry matter production to slurry-N application rates showed the highest values of 18.9 kg and 15.7 kg DM/kg N at rates of 30 kg N/ha/cut in 3 and 5 cuttings, and 16.3 kg DM/kg/ N at rates of 90 kg N/ ha/cut in 4 cuttings. The efficiency of total nitrogen yield to slurry-N application rates were the highest values of 0.51 kg and 0.43 kg W k g N at rates of 30 kg N/ha/cut in 4 and 5 cuttings, and 0.52 kg TN/kg N at rates of 90 kg N/ha/cut in 3 cuttings, respectively. 7. The ranges of economic slurry-N rates were estimated as the 107.2-151.0 kglha, 359.1-375.7 kgha and 160.3-236.9 kg/ha in 3, 4 and 5 cuttings, and marginal dry matter yields were 9.6-10.0 tons/ha, 12.4-12.6 tons/ha and 9.0-9.7 tons/ha in 3, 4 and 5 cuttings, respectively. 8. The limiting sluny-N application rates to maintain the highest dry matter yields were estimated to be 420.0 kg/ ha, 440.6 kg/ha and 666.3 kg/ha in 3, 4 and 5 cuttings.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.13
• /
• pp.93-105
• /
• 1973

Differential tolerance of rice varieties, Tongil and Mangyung(or Milsung) varieties, against herbicides combined with Simetryne was investigated by the rate of application in 4 places; Jeonju, Gwangju, Iri and Milyang, whose soil textures were Lic, Sic, CL and Lic respectively. The results are summarized as follows: 1) Jeonju a. Initial crop injury At the rate of 2kg/10a prod. no initial crop injury was caused(both to Mangyung and Tongil varieties) on light clay soil, even when treated at high temperature of $30^{\circ}C$ and above. Crop injury was first caused at 3kg/l0a prod. to Tongil variety and the damage increased in proportion to the increase of application rate, while no crop injury was caused to Mangyung variety even at high rate of 5kg/l0a prod. b. Yield Tongil variety: Under high temperature condition in a vinyl house no statistical difference was observed between treated and hand weeding plot at the rates of 3kg/l0a prod. and below. Under air temperature conditions no statistical difference was observed between treated and hand weeding plot at the rates of 4kg/l0a prod. and below. Mangyung variety: No statistical difference was observed between treated and hand weeding plot at the rates of 5kg/l0a prod. and below both under air and high temperature conditions. 2) Gwangju a. Initial crop injury Although almost the same tendency as in Jeonju was observed, a little lighter crop injury was observed in general in Gwangju than in Jeonju at the time of application. And so, no crop injury was caused to Tongil variety until 4kg/l0a prod. and above. b. Yield Tongil variety: No statistical difference was observed between treated and hand weeding plot at 4kg/l0a prod. and below. Mangyung variety: No statistical difference was observed between treated and hand weeding plot at 4kg/l0a prod. and below. 3) Iri No crop injury was caused both to Tongil and Mangyung varieties at 4kg/l0a prod. and below. Also, no reduction of grain yield was observed. 4) Milyang A little lighter crop injury was observed in general. No crop injury was caused to Milsung variety at 5kg/l0a prod. ; Only a slight crop injury was caused to Tongil variety. Yield: No statistical difference was observed between treated and hand weeding plot both of Tongil and Milsung varieties even at 5kg/l0a prod. and below.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.4 no.3
• /
• pp.180-186
• /
• 1984

From June, 1980 to October, 1982, this study was carried out to find an optimal grazing system on the timothy and orchardgrass-dominated pasture. Five different systems consisted of set stocking, modified set stocking, rotational grazing, 'wye college' system and zero grazing have been applied. The results obtained were as follow: 1. Herbage DM yield per ha with 'wye college' system, set stocking, modified set stocking, rotational grazing and zero grazing were 6936.7 kg,6794.3 kg, 6686.9 kg 6675.7 kg and 5083.4 kg respectively. Among treatments were not different in DM yield. 2. In herbage utilization, zero grazing was the highest than other. Zero Grazing, Rotational grazing, 'Wye college' system, Modified set stocking and set stocking was 89.3%, 70.8%, 64.4% and 46.1% respectively. 3. Daily intake per head with 'wye college' system was the highest than others and zero grazing was the lowest than others. 4. Daily gain with 'wye college' system, rotational grazing, modified set stocking, set stocking and zero grazing were 0.60kg, 0.55kg, 0.50kg, 0.43kg and 0.42 respectively. Among treatment, there was no significance. 5. Total weight gain per ha with 'wye college' system, rotational grazing, modified set stocking, zero grazing and set stocking were 339.5kg, 299.1kg, 253.3kg, 226.6kg and 222.2kg respectively. 6. Grazing time among treatments was not significant. 'Wye college' system spent the shortest time, 367.3 minutes and set stocking consumed the longest time, 422.1 minutes. 7. Daily grazing time by seasonal change with June, July, August, September and October was 304.9 min., 359.4 min., 437.9 min., 483.3 min. and 395.8 min., respectively. According to passing the season, grazing time was lengthened. 8. Grazing time for Korean native cow, native cow charolais and native cow holstein were not significant. Native sow charolais consumed the longest time, 457.0 min., whereas Korean native cow consumed the shortest time, 422.4 min..

• Korean Journal of Food Science and Technology
• /
• v.43 no.5
• /
• pp.525-531
• /
• 2011

This study was conducted to examine the contents of lead (Pb), cadmium (Cd), arsenic (As), and mercury (Hg) in meat and meat products in Korea. The contents of Pb, Cd, As, and Hg in 466 samples of beef, pork, chicken, duck, ham, and sausage were measured using inductively coupled plasma mass spectrometry or a mercury analyzer. Wet ashing and microwave method were compared, and the recovery and reproducibility of the microwave method were better than those of wet ashing for meat and meat products. The recovery of the microwave method was 98.1% for Pb, 104.6% for Cd, and 103.4% for As, respectively. The best result was obtained through digestion using an acid mixture ($HNO_3$/$H_2O_2$, 6:2). Hg content was measured using a mercury analyzer. As a result, the contents of Hg and Cd in samples were lower than those of Pb and As. The average contents of Pb were 0.009 mg/kg in beef, 0.010 mg/kg in pork, 0.006 mg/kg in chicken, 0.007 mg/kg in duck, 0.005 mg/kg in ham, and 0.009 mg/kg in sausage. The average Cd contents were 0.0004 mg/kg in beef, 0.0004 mg/kg in pork, 0.0005 mg/kg in chicken, 0.0012 mg/kg in duck, 0.0015 mg/kg in ham, and 0.0019 mg/kg in sausage. The average As contents were 0.016 mg/kg in beef, 0.004 mg/kg in pork, 0.021 mg/kg in chicken, 0.010 mg/kg in duck, 0.014 mg/kg in ham, and 0.018 mg/kg in sausage. The average Hg contents were 0.713 ${\mu}g/kg$ in beef, 0.902 ${\mu}g/kg$ in pork, 0.710 ${\mu}g/kg$ in chicken, 0.796 ${\mu}g/kg$ in duck, 1.141 ${\mu}g/kg$ in ham, and 1.052 ${\mu}g/kg$ in sausage. Based on the results of the National Health and Nutrition Survey 2005, the levels of dietary exposure to heavy metal contaminants in meat and meat products were compared with the provisional tolerable weekly intake(PTWI) established by the Joint FAO/WHO Expert Committee on Food Additives. The average dietary exposure of the general population from meat and meat products was 0.03-0.2% of PTWI for Pb, Cd, As, and Hg, which indicates a safe level for public health at present.

• Journal of Animal Science and Technology
• /
• v.48 no.4
• /
• pp.493-502
• /
• 2006

The slaughter weight (wt) is a most important economic factor in swine roduction. The present study was undertaken to determine if it is feasible to increase the slaughter wt of finishing pigs to 130kg without significantly affecting the growth efficiency and carcass quality. One hundred and sixty gilts and 160 barrows born from lean-type Yorkshire×Landrace (YL)-dam and Duroc (D)-sire lines, which are most widely used for terminal breeding for pork production in Gyeongsangnam-do, were randomly allocated into 16 pens under a 2 (sex)×2 (slaughter wt; 110 vs. 130kg) factorial arrangement of treatments. The animals were fed ad libitum a diet containing 3,200kcal DE/kg and 15.5% crude protein. After slaughter at the predetermined wt, yields of trimmed primal cuts and physicochemical characteristics of the longissimus dorsi muscle (LD) were measured or analyzed. Average daily gain was greater (P<0.01) in barrows than in gilts (0.86 vs. 0.79kg), but it was not different between the 110- and 130-kg slaughter wt groups (P>0.05). Backfat thickness was greater in the 130- vs. 110-kg group in both sexes (gilts: 21.6 vs. 17.6 mm, barrows: 25.1 vs. 20.8 mm). The yield percentage of belly was greater in barrows than in gilts (21.2 vs. 20.5%) and also in the 130-kg vs. 110-kg group (21.4 vs. 20.2%). Major physicochemical characteristics of LD including the color, percentage of 48-h drip loss, 24-h pH and percentages of crude protein and fat were not influenced by slaughter wt. Marginal profit of the 130-kg vs. 110-kg market pig was approximately 󰠏20,000 won/head, which resulted primarily from the heavy carcass weight of the former exceeding the upper limit of the A- or B-grade. However, if it had not been for the carcass weight limit of the current grading system, a 130-kg market pig would have had a potential marginal profit greater than 20,000 won. Results suggest that slaughter wt of lean-line finishing pigs can be increased to 130kg without significantly compromising the growth efficiency and carcass quality and accordingly, the upper weight limit of the ‘good-grade’ carcass needs to be increased or abolished to accommodate the larger market pigs.