• Journal of the Korea institute for structural maintenance and inspection
• /
• v.20 no.1
• /
• pp.41-47
• /
• 2016

This paper presents a bond test to find the effect of shear key and edge length from the bonded FRP in near surface-mounted(NSM) retrofit using FRP plate. Main parameters in the test are the location and size of shear key and the edge length. For the test, 10 specimens were made by embedding FRP plate of $3.6mm{\times}16mm$ into $400mm{\times}200(300)mm{\times}400mm$ concrete block and fixing it by using epoxy. Tensile load was applied to the FRP of the specimens until failure and was recorded at each load increase. In addition, the bond slip and elongation of FRP were measured during the test. From the test, it was found that the further the shear key located from the loading, the higher strength we could get. The bond strength inversely depended on the size of shear key. Especially, when the size of shear key was to be lagger than certain size, the bond strength decreased to very low value; even less than that of the case without shear key. The bond strength somewhat increased corresponding to the increase of edge length from the bonded end of FRP to loading in spite of same bond length. The bond-slip between FRP and concrete governed overall deformation in the bond test of NSM FRP so that the effect of excessive slip is necessary to be considered in the design.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.3
• /
• pp.1345-1362
• /
• 2019

Most active queue management algorithms manage network congestion based on the size of the queue but ignore the network environment which makes queue size change. It seriously affects the response speed of the algorithm. In this paper, a new AQM algorithm named CT-AQM (Change Trend-Adaptive Queue Management) is proposed. CT-AQM predicts the change trend of queue size in the soon future based on the change rate of queue size and the network environment, and optimizes its dropping function. Simulation results indicate that CT-AQM scheme has a significant improvement in loss-rate and throughput.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.16
• /
• pp.6511-6517
• /
• 2014

Purpose: We aimed to study the relationship between thrombocytosis and clinical features of gastric cancerfocussing on platelet counts and gastric cancer progression through different TNM stages. Methods: According to the normal range of platelet count in our institution, 1,596 patients were divided to two groups: a thrombocytosis group (120 patients, > $400{\times}1000/{\mu}L$) and a control group (1,476 patients, ${\leq}400{\times}1000/{\mu}L$). Results: The incidence of thrombocytosis was 7.5%. Higher platelet counts were observed in patients with older age, larger tumor size, deeper invasion, lymph node metastasis, distant metastasis and advanced TNM stage. In multivariate logistic regression, tumor size, depth of tumor invasion, lymph node metastasis and TNM stage were independent risk factors for thrombocytosis of gastric cancer patients. On prognostic analysis, age, tumor size, tumor location, histologic type, depth of tumor invasion, lymph node metastasis, distant metastasis and TNM stage and platelet count were important factors. Tumor size, invasion depth, lymph node metastasis, TNM stage and the platelet count were independent prognostic factors. Conclusion: Thrombocytosis is associated with clinical features of gastric cancer patients and correlates with a poor prognosis.

• Nuclear Engineering and Technology
• /
• v.50 no.1
• /
• pp.132-139
• /
• 2018

Nanocrystalline reduced activation ferritic/martensitic (RAFM) steel samples were prepared using surface mechanical attrition treatment (SMAT). Un-SMATed and SMATed reduced activation ferritic/martensitic samples were irradiated by helium ions at $200^{\circ}C$ and $350^{\circ}C$ with 2 dpa and 8 dpa, respectively, to investigate the effects of grain boundaries (GBs) and temperature on the formation of He bubbles during irradiation. Experimental results show that He bubbles are preferentially trapped at GBs in all the irradiated samples. Bubble denuded zones are clearly observed near the GBs at $350^{\circ}C$, whereas the bubble denuded zones are not obvious in the samples irradiated at $200^{\circ}C$. The average bubble size increases and the bubble density decreases with an increasing irradiation temperature from $200^{\circ}C$ to $350^{\circ}C$. Both the average size and density of the bubbles increase with an increasing irradiation dose from 2 dpa to 8 dpa. Bubbles with smaller size and lower density were observed in the SMATed samples but not in the un-SMATed samples irradiated in the same conditions, which indicate that GBs play an important role during irradiation, and sink strength increases as grain size decreases.

• Journal of the Ergonomics Society of Korea
• /
• v.29 no.4
• /
• pp.605-610
• /
• 2010

In order to design a touch interface for the elderly, human performance of input tasks on the touch screen was investigated by the laboratory experiment. Input times and input errors were measured in the experimental conditions that were changed according to age, key size, interkey space and input tool(finger or stylus pen). In the most of all experimental conditions, the task performance of the elderly was lower than that of the young. However, there were significantly different performance patterns between both groups. As the difficulty of task was getting higher, the task performance of the elderly was sharply decreased; pressing small key button by finger sharply increased input time and error rate, compared to that of the young. Therefore, the square key size suitable to the elderly may be over $8.0{\times}8.0mm$. While the interkey space did not influence to the input task performance of the young, the task performance of the elderly was influenced. The elderly showed big difference of task performance according to input tool. However, the young were less influenced by input tool.

• Journal of electromagnetic engineering and science
• /
• v.10 no.4
• /
• pp.316-321
• /
• 2010

This paper presents a novel fourth harmonic mixer with new structure. The traditional 3-ports fourth harmonic mixer and the novel fourth harmonic mixer are designed by ADS, HFSS and CST simulator. The mixers have been fabricated and tested. The size of the traditional 3-ports fourth harmonic mixer is $12{\times}15$ mm, and the best conversion loss is 18.7 dB according to the measurement. Since the traditional 3-port mixer size is too large to be ranked, we design a novel fourth harmonic mixer for imaging system. The width of the mixing module in the novel fourth harmonic mixer is only 3.65 mm, and this size is fully capable to meet the mixer unit space which is not greater than 5 mm. The simulation result shows that the mixer has good performance, and the experiment result shows that the best conversion loss of the novel fourth harmonic mixer is 16.3 dB at RF signal of 91.3 GHz.

• Geomechanics and Engineering
• /
• v.23 no.5
• /
• pp.431-439
• /
• 2020

Soil-water retention curve (SWRC) contains key information for the application of unsaturated soil mechanics principles to engineering practice. The SWRC variables are commonly used to describe the hydro-mechanics of soils. Generally, these parameters are determined using the graphical method which can be time consuming. The SWRC is highly dependent on the pore size distribution (PSD). Theoretically, the PSD obtained by mercury intrusion porosimetry test can be used to determine some SWRC variables. Moreover, the relationship between SWRC and shrinkage curve has been investigated. A new method to determine total SWRC variables directly without curve-fitting procedure is proposed. Substituting the variables into linear SWRC equations construct SWRC. A good agreement was obtained between predicted and measured SWRCs, indicating the validity of the proposed method for unimodal SWRC.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.13 no.2
• /
• pp.91-98
• /
• 2003

We introduce a new public key system based on the discrete logarithm Problem(DLP) in a quotient group of finite fields. This system achieves savings not only in communication overhead by reducing public key size and transfer data by half but also in computational costs by performing efficient exponentiation. In particular, this system takes about 50% speed-up, compared to DSA which has the same security.

• Asian-Australasian Journal of Animal Sciences
• /
• v.21 no.7
• /
• pp.917-922
• /
• 2008

A disintegrin-like and metalloprotease (reprolysin type) with thrombospondin type 1 motif (ADAMTS1) plays a critical role in follicular rupture and represents a major advance in the proteolytic events that control ovulation. In this study, a 9,026-bp DNA sequence containing the full coding region, all 8 introns and part of the 5'and 3' untranslated region of the porcine ADAMTS1 gene was obtained. Analysis of the ADAMTS1 gene using the porcine radiation hybrid panel indicated that pig ADAMTS1 is closely linkage with microsatellite marker S0215, located on SSC13q49. The open reading frame of its cDNA covered 2,844 bp and encoded 947 amino acids. The coding region of porcine ADAMTS1 as determined by sequence alignments shared 85% and 81% identity with human and mouse cDNAs, respectively. The deduced protein contained 947 amino acids showing 85% sequence similarity both to the human and mouse proteins, respectively. Comparative sequencing of three pig breeds revealed one single nucleotide polymorphism (SNP) within exon 7 of which a G-C substitution at position 6006 changes a codon for arginine into a codon for proline. The substitution was situated within a PvuII recognition site and developed as a PCR-RFLP marker for further use in population variation investigations and association analysis with litter size. Allele frequencies of this SNP were investigated in seven pig breeds/lines. An association analysis in a new Qingping female line suggested that different ADAMTS1 genotypes have significant differences in litter size (p<0.01).

• Journal of electromagnetic engineering and science
• /
• v.10 no.3
• /
• pp.179-182
• /
• 2010

This paper proposed a novel compact bandpass filter with folded half mode substrate integrated waveguide (FHMSIW) cavities using two-layer printed circuit board(PCB) process. The area of the FHMSIW filter is reduced by nearly 50 % and 75 % compared with half mode substrate integrated waveguide(HMSIW) filter and substrate integrated waveguide(SIW) filter, respectively. A four-pole Chebyshev FHMSIW bandpass filter at C-band has been designed, simulated and fabricated. Measured results are presented and found to agree with the full-wave simulated results by using Ansoft HFSS. The filter shows good performance and compact size.