• Geomechanics and Engineering
• /
• v.13 no.3
• /
• pp.489-504
• /
• 2017

The localized shear and the slip lines are easily observed in elastic-brittle-plastic rock. After yielding, the strength of the brittle rock suddenly drops from the peak value to the residual value, and there are slip lines which divide the macro rock into numbers of elements. There are slippages of elements along the slip lines and the displacement field in the plastic region is discontinuous. With some restraints, the discontinuities can be described by the combination of two smooth functions, one is for the meaning of averaging the original function, and the other is for characterizing the breaks of the original function. The slip lines around the circular opening in the plastic region of an isotropic H-B rock which subjected to a hydrostatic in situ stress can be described by the logarithmic spirals. After failure, the deformation mechanism of the plastic region is mainly attributed to the slippage, and a slippage parameter is introduced. A new analytical solution is presented for the plane strain analysis of displacements around circular openings. The displacements obtained by using the new solution are found to be well coincide with the exact solutions from the published sources.

• Nuclear Engineering and Technology
• /
• v.55 no.11
• /
• pp.3973-3982
• /
• 2023

As for two-phase flow in rectangular channels, the flow regimes especially like churn-turbulent and annular flow are significant for the physical problem like Countercurrent Flow Limitation (CCFL). In this study, the rectangular channels with cross-sections of 4 × 66 mm, 6 × 66 mm, 8 × 66 mm are adopted to investigate the flow regimes of air-water vertical upward two phase flow under adiabatic condition. The gas and liquid superficial velocities are 0 ≤ j_g ≤ 20m/s and 0.25 ≤ j_f ≤ 3m/s respectively which covering bubbly to annular flow. The flow regimes are identified by random forest algorithm and the flow regime maps are obtained. As the results, the transitional void fraction from slug to churn turbulent flow fluctuate from 0.47 to 0.58 which is significantly affected by the dimensional size of channel and flow rate. Besides, the void fraction at transitional points from churn-turbulent (slug) to annular flow are 0.66-0.67, which are independent with the gap size. Furthermore, a new criteria of slug to churn-turbulent flow is established in this study. In addition, by introducing the interfacial force model, the criteria of churn-turbulent (slug) flow to annular flow is verified.

• Journal of Wetlands Research
• /
• v.25 no.4
• /
• pp.408-416
• /
• 2023

The IUCN Red List of Ecosystems serves as a global standard for assessing and identifying ecosystems at high risk of biodiversity loss, providing scientific evidence necessary for effective ecosystem management and conservation policy formulation. The IUCN Red List of Ecosystems has been designated as a key indicator (A.1) for Goal A of the Kunming-Montreal Global Biodiversity Framework. The assessment of the Red List of Ecosystems discerns signs of ecosystem collapse through specific criteria: reduction in distribution (Criterion A), restricted distribution (Criterion B), environmental degradation (Criterion C), changes in biological interaction (Criterion D), and quantitative estimation of the risk of ecosystem collapse (Criterion E). Since 2014, the IUCN Red List of Ecosystems has been evaluated in over 110 countries, with more than 80% of the assessments conducted in terrestrial and inland water ecosystems, among which tropical and subtropical forests are distributed ecosystems under threat. The assessment criteria are concentrated on spatial signs (Criteria A and B), accounting for 68.8%. There are three main considerations for applying the Red List of Ecosystems assessment domestically: First, it is necessary to compile applicable terrestrial ecosystem types within the country. Second, it must be determined whether the spatial sign assessment among the Red List of Ecosystems categories can be applied to the various small-scale ecosystems found domestically. Lastly, the collection of usable time series data (50 years) for assessment must be considered. Based on these considerations, applying the IUCN Red List of Ecosystems assessment domestically would enable an accurate understanding of the current state of the country's unique ecosystem types, contributing to global efforts in ecosystem conservation and restoration.

• Animal Bioscience
• /
• v.36 no.6
• /
• pp.899-907
• /
• 2023

Objective: The better understanding of laying pattern of birds is crucial for developing breed-specific proper breeding scheme and management. Methods: Daily egg production until 50 wk of age of six chicken breeds including one layer (White Leghorn, WL), three dual-purpose (Rhode Island Red, RIR; Columbian Plymouth Rock, CR; and Barred Plymouth Rock, BR), one synthetic dwarf (DY), and one indigenous (Beijing-You Chicken, BYC) were used to characterize their clutch traits and egg production. The age at first egg, egg number, average and maximum clutch length, pause length, and number of clutches and pauses were calculated accordingly. Results: The egg number and average clutch length in WL, RIR, CR, and BR were higher than those in DY and BYC (p<0.01). The numbers of clutches and pauses, and pause length in WL, RIR, CR, and BR were lower than those in DY and BYC (p<0.01). The coefficient variations of clutch length in WL, RIR, CR, and BR (57.66%, 66.49%, 64.22%, and 55.35%, respectively) were higher than DY (41.84%) and BYC (36.29%), while the coefficient variations of egg number in WL, RIR, CR, and BR (9.10%, 9.97%, 10.82%, and 9.92%) were lower than DY (15.84%) and BYC (16.85%). The clutch length was positively correlated with egg number (r = 0.51 to 0.66; p<0.01), but not correlated with age at first egg in all breeds. Conclusion: The six breeds showed significant different clutch and egg production traits. Due to the selection history, the high and median productive layer breeds had higher clutch length than those of the less productive indigenous BYC. The clutch length is a proper selection criterion for further progress in egg production. The age at first egg, which is independent of clutch traits, is especially encouraged to be improved by selection in the BYC breed.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.5
• /
• pp.2179-2188
• /
• 2015

Recently, many researches have been done to solve the challenging problem of Blind Source Separation (BSS) problems in the underdetermined cases, and the “Two-step” method is widely used, which estimates the mixing matrix first and then extracts the sources. To estimate the mixing matrix, conventional algorithms such as Single-Source-Points (SSPs) detection only exploits the sparsity of original signals. This paper proposes a new underdetermined mixing matrix estimation method for time-delayed mixtures based on the receiver prior exploitation. The prior information is extracted from the specific structure of the complex-valued mixing matrix, which is used to derive a special criterion to determine the SSPs. Moreover, after selecting the SSPs, Agglomerative Hierarchical Clustering (AHC) is used to automaticly cluster, suppress, and estimate all the elements of mixing matrix. Finally, a convex-model based subspace method is applied for signal separation. Simulation results show that the proposed algorithm can estimate the mixing matrix and extract the original source signals with higher accuracy especially in low SNR environments, and does not need the number of sources before hand, which is more reliable in the real non-cooperative environment.

• Geomechanics and Engineering
• /
• v.7 no.3
• /
• pp.263-277
• /
• 2014

In the conventional design of retaining structures in a seismic zone, seismic inertia forces are commonly assumed to act upwards and towards the wall facing to cause a maximum active thrust or act upwards and towards the backfill to cause a minimum passive resistance. However, under certain circumstances this design approach might underestimate the dynamic active thrust or overestimate the dynamic passive resistance acting on a rigid retaining structure. In this study, a new analytical method for dynamic active and passive forces in c-${\phi}$ soils with an infinite slope was proposed based on the Rankine earth pressure theory and the Mohr-Coulomb yield criterion, to investigate the influence of seismic inertia force directions on the total active and passive forces. Four combinations of seismic acceleration with both vertical (upwards or downwards) and horizontal (towards the wall or backfill) directions, were considered. A series of dimensionless dynamic active and passive force charts were developed to evaluate the key influence factors, such as backfill inclination ${\beta}$, dimensionless cohesion $c/{\gamma}H$, friction angle ${\phi}$, horizontal and vertical seismic coefficients, $k _h$ and $k_v$. A comparative study shows that a combination of downward and towards-the-wall seismic inertia forces causes a maximum active thrust while a combination of upward and towards-the-wall seismic inertia forces causes a minimum passive resistance. This finding is recommended for use in the design of retaining structures in a seismic zone.

• Structural Engineering and Mechanics
• /
• v.75 no.4
• /
• pp.415-424
• /
• 2020

Recently, many structural damage detection (SDD) methods have been proposed to monitor the safety of structures. As an important modal parameter, mode shape has been widely used in SDD, and the difference of vectors was adopted based on sensitivity analysis and mode shapes in the existing studies. However, amplitudes of mode shapes in different measured points are relative values. Therefore, the difference of mode shapes will be influenced by their amplitudes, and the SDD results may be inaccurate. Focus on this deficiency, a multi-strategy SDD method is proposed based on the included angle of vectors and sparse regularization in this study. Firstly, inspired by modal assurance criterion (MAC), a relationship between mode shapes and changes in damage coefficients is established based on the included angle of vectors. Then, frequencies are introduced for multi-strategy SDD by a weighted coefficient. Meanwhile, sparse regularization is applied to improve the ill-posedness of the SDD problem. As a result, a novel convex optimization problem is proposed for effective SDD. To evaluate the effectiveness of the proposed method, numerical simulations in a planar truss and experimental studies in a six-story aluminum alloy frame in laboratory are conducted. The identified results indicate that the proposed method can effectively reduce the influence of noises, and it has good ability in locating structural damages and quantifying damage degrees.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.4
• /
• pp.1406-1423
• /
• 2014

Multi-mode device which combines multiple access technologies into a device will offer more cost-effective solution than a sole access implementation. Its concurrent multipath transfer (CMT) technology can transmit media flows over multiple end-to-end paths simultaneously, which is essential to select at least two paths from all available paths. At real networks, different paths are likely to overlap each other and even share bottleneck, which can weaken the path diversity gained through CMT. Spurred by this observation, it is necessary to select multiple independent paths as much as possible to avoid underlying shared bottleneck between topologically joint paths. Recent research in this context has shown that different paths with shared bottleneck can weaken the path diversity gained through CMT. In our earlier work, a grouping-based multipath selection (GMS) mechanism is introduced and developed. However, how to estimating the selection is still to be resolved. In this paper, we firstly introduce a Selection Correctness Index (SCI) to evaluate the correctness of selection results in actual CMT experiment. Therefore, this metric is helpful to discuss and validate the accuracy of the output paths. From extensive experiments with a realized prototype, the proposed scheme provides better evaluation tool and criterion in various network conditions.

• Journal of Digital Contents Society
• /
• v.14 no.1
• /
• pp.65-72
• /
• 2013

Current and future parallel computing model has been suggested for running and solving large-scale application problems such as climate, bio, cryptology, and astronomy, etc. Parallel computing is a form of computation in which many calculations are carried out simultaneously. And we are able to shorten the execution time of the program, as well as can extend the scale of the problem that can be solved. In this paper, we perform the actual cryptographic algorithms through parallel processing and evaluate its efficiency. Length of the key, which is stable criterion of cryptographic algorithm, judged according to the amount of complete enumeration computation. So we present a detailed procedure of DES key search cryptographic algorithms for executing of enumeration computation in parallel processing environment. And then, we did the simulation through applying to clustering system. As a result, we can measure the safety and solidity of cryptographic algorithm.

• Nuclear Engineering and Technology
• /
• v.51 no.6
• /
• pp.1514-1524
• /
• 2019

Hydrogen-steam gas mixture may be injected into containment with flow regime varying both spatially and transiently due to wall effect and pressure difference between primary loop and containment in severe accidents induced by loss of coolant accident. Preliminary CFD analysis is conducted to gain information about the helium flow regime transition process from jet to buoyancy plume for forthcoming experimental study. Physical models of impinging jet and wall condensation are validated using separated effect experimental data, firstly. Then helium transportation is analyzed with the effect of jet momentum, buoyancy and wall cooling discussed. Result shows that helium distribution is totally dominated by impinging jet in the beginning, high concentration appears near gas source and wall where jet momentum is strong. With the jet weakening, stable light gas layer without recirculating eddy is established by buoyancy. Transient reversed helium distribution appears due to natural convection resulted from wall cooling, which delays the stratification. It is necessary to concern about hydrogen accumulation in lower space under the containment external cooling strategy. From the perspective of experiment design, measurement point should be set at the height of connecting pipe and near the wall for stratification stability criterion and impinging jet modelling validation.