• 한국전산구조공학회논문집
• /
• 제29권2호
• /
• pp.123-130
• /
• 2016

선박 건조 시장의 요구를 맞추기 위하여 신속한 건조의 목표로 노력하고 있는 조선소가 선박 정도관리에 대한 요구가 갈수록 높아지고 있다. 선박 건조 공정에서 생산성의 향상과 생산 주기의 단축을 위하여 선박 부재의 정도평가를 전 주기에서 수행해야 하는 것은 중요하다. 선박의 품질을 높이기 위하여 조선소에서 블록의 정도제어를 수행하는 것은 선박의 건조 주기를 단축할 수 있을 뿐만 아니라 건조 비용도 줄일 수 있다. 선박 블록의 정도를 제어하는 중심은 선박 블록 통합 정도관리 시스템을 만들어야 한다. 이 시스템은 "Non-allowance Shipbuilding"의 목표로 정도관리의 총괄성, 블록 정도의 향상, 정도 관리 과정의 표준화 등이 이루어져야 한다. 일반적으로 정도관리를 수행하는 관리자가 광파측정기를 이용하여 선박 블록의 접합면에 있는 주요 포인트(vital point)를 측정하고 수집하지만 무거운 계측장비를 가지고 블록의 정도관리를 수행하는 것은 불편할 뿐만 아니라 시간도 오래 걸린다. 본 논문에서는 선박 블록의 정도관리 시간을 단축할 수 있는 포인트 클라우드 기반으로 3차원 레이저 스캐너를 이용한 선박 블록 탑재 전에 오차예측 방법을 제안하였다. 이 방법은 ICP(iterative closest point) 알고리즘으로 측정된 포인트 클라우드와 설계된 점들의 비교 작업을 수행한 다음에 허용범위 내의 오차를 만족하는 지를 판단한다.

• 한국게임학회 논문지
• /
• 제14권4호
• /
• pp.27-36
• /
• 2014

사용자중심의 게임분석에 대한 과학적인 접근이 주목 받고 있는 게임개발 환경에서 플레이어에 대한 정확한 정보는 중요한 요소로 작용하고 있다. 본 논문에서는 플레이어의 행동과 게임레벨간의 상호작용이 타 장르에 비해 높은 FPS게임에서 주된 레벨디자인 요소인 Choke Point 유형과 Cover Pattern속성의 관계가 레벨난이도에 어떠한 영향을 주는지 살펴보았다. Choke Point는 목표달성을 위해 반드시 통과해야하는 주요 길목이며, Cover Pattern은 건물을 제외한 레벨상의 물체를 말한다. 두 요소는 레벨 난이도에 직 간접적으로 영향을 준다. 대표적인 10종의 FPS게임플레이를 분석하여 Choke Point유형을 분류하고 4종의 Cover Pattern속성을 배치하여 16개의 실험대상 레벨을 구성하였다. 10명 플레이어의 5회 반복플레이를 통해 800개의 플레이어 행동데이터를 수집, 분석하였다. 이러한 실증적 실험을 통한 분석결과는 게임레벨 디자인 단계에 구체적인 정보를 제공함으로써 체계적인 게임레벨 제작에 기여할 것이며 기존 학술적연구결과가 산업적으로 활용될 수 있는 방법을 제안하고 있어 의의를 갖는다.

• 한국정보통신학회논문지
• /
• 제26권8호
• /
• pp.1172-1179
• /
• 2022

이진 에드워즈 곡선 (Binary Edwards Curves; BEdC) 기반의 공개키 암호 시스템을 위한 점 스칼라 곱셈기 설계에 대해 기술한다. BEdC 상의 점 덧셈 (Point Addition; PA)과 점 두배 (Point Doubling; PD) 연산의 효율적인 구현을 위해 유한체 연산에 투영 좌표계를 적용하였으며, 이에 의해 점 스칼라 곱셈 (Point Scalar Multiplication; PSM)에 단지 1회의 유한체 역원 연산만 포함되어 연산성능이 향상되었다. 하드웨어 설계에 최적화를 적용하여 PA와 PD의 유한체 연산을 위한 저장 공간과 연산 단계를 약 40% 감소시켰다. BEdC를 위한 점 스칼라 곱셈기를 두 가지 유형으로 설계했으며, Type-I은 257-b×257-b 이진 곱셈기 1개를 사용하고, Type-II는 32-b×32-b 이진 곱셈기 8개를 사용한다. Type-II 설계는 Type-I 구조에 비해 LUT를 65% 적게 사용하나, 240 MHz로 동작할 때 약 3.5배의 PSM 연산시간이 소요되는 것으로 평가되었다. 따라서 Type-I의 BEdC 크립토 코어는 고성능이 필요한 경우에 적합하고, Type-II 구조는 저면적이 필요한 분야에 적합하다.

• 대한치과교정학회지
• /
• 제52권2호
• /
• pp.150-160
• /
• 2022

Objective: To provide reliable prediction models based on dentoskeletal and soft tissue variables for customizing maxillary incisor positions and to optimize digitalized orthodontic treatment planning. Methods: This study included 244 Chinese women (age, 18-40 years old) with esthetic profiles after orthodontic treatment with fixed appliances (133 in group I: 1° ≤ The angle between the nasion [N]-A point [A] plane and the N-B point [B] plane [ANB] ≤ 4°; 111 in group II: 4° < ANB ≤ 7°). Dental, skeletal, and soft tissue measurements were performed on lateral cephalograms of the participants. Correlation and multiple linear regression analyses were used to determine the influence of dentoskeletal and soft tissue variables on maxillary incisor position. Results: The ideal anteroposterior position of the maxillary incisor varied between sagittal skeletal patterns. The position of the maxillary incisor correlated with the sagittal discrepancy between the maxilla and the mandible (ANB), protrusion of the midface, nasal tip projection, development of the chin, and inclination of both the maxillary and mandibular incisors. Distance from the maxillary central incisor to nasion-pogonion plane predicted using multiple linear regression analysis was accurate and could be a practical measurement in orthodontic treatment planning. Conclusions: Instead of using an average value or norm, orthodontists should customize a patient's ideal maxillary incisor position using dentoskeletal and soft tissue evaluations.

• 한국측량학회지
• /
• 제25권6_2호
• /
• pp.645-651
• /
• 2007

일반적으로 수치지도의 등고선은 항공사진을 해석 및 수치 도화기 상에서 입체시 하여 동일한 높이의 점들을 3차원으로 측정하고 도화하여 생성되므로 등고선 도화는 작업량이 많고 도화사의 주관적인 판단과 경험에 의해 결정된다. 그러므로 지형의 형태와 특성을 묘사하는 등고선의 도화는 도화사의 풍부한 경험이 요구된다. 또한 국내의 수치지도는 수치지형모델(DTM) 데이터를 포함하고 있지 않으므로 DTM이 필요한 경우 대부분 등고선 데이터로부터 간접적으로 생성한다. 본 연구에서는 지형의 특성에 대한 중요한 정보를 포함하고 있는 model key point를 등고선에서 추출하고, 이를 기반으로 지형적 특성을 고려하여 DTM의 격자간격을 효율적이고 융통적으로 조절하여 정량적 및 정성적인 측면에서 최적의 데이터를 이용하여 DTM을 생성하는 방법을 제안한다. 이를 위하여 progressive sampling 기법을 적용하여 지형이 복잡하여 기복이 큰 산악지역에는 격자간격을 작게하고 지형이 완만한 지역은 격자간격을 상대적으로 크게한다. 그러므로 고정된 하나의 격자간격을 사용하지 않고 지역별로 서로 다른 격자간격을 가지는 다중격자 DTM을 생성하였다. 다중격자 DTM은 용량이 최적화되어 계산량이 적고, 신속한 디스플레이 할 수 있는 장점이 있다.

• 한국중재학회지:중재연구
• /
• 제30권2호
• /
• pp.165-184
• /
• 2020

In this study, the factors affecting opportunism in the relationship between suppliers and key accounts were analyzed from the viewpoint of transaction cost theory, market power theory, and relationship marketing theory. As a result of the hypothesis test, Hypothesis 1 stating that demand volatility will have a positive effect on opportunism and Hypothesis 2 that transaction-specific investment will have a positive effect on opportunism were also supported. In addition, Hypothesis 3 stating that channel power will have a positive effect on opportunism was also supported. Lastly, Hypothesis 4 stating that relational commitment will have a negative effect on opportunism was not supported, along with Hypothesis 5 stating that transaction satisfaction will have a negative effect on opportunism. The theoretical and practical implications of this study are as follows. This study has identified the antecedents of opportunism by comprehensively applying the transaction cost theory, market power theory, and relationship marketing theory. In addition, this study can identify what a company should manage specifically to lower opportunism by identifying the antecedents of opportunism. The limitations of this study and the directions for future studies are as follows. First, not all of the antecedents of opportunism of key accounts have been extensively investigated from the viewpoint of the transaction cost theory, market power theory, and relationship marketing theory. In the future, it is necessary to identify additional factors. Second, the study was conducted only in the supplier's viewpoint. In future studies, it is expected that more accurate research results can be obtained by simultaneously examining not only the supplier's point of view but also the buyer's point of view.

• Toxicological Research
• /
• 제34권4호
• /
• pp.291-296
• /
• 2018

Chemical carcinogenesis is a multistep process. Genotoxic carcinogens, which are DNA-reactive, induce DNA adduct formation and genetic alterations in target cells, thereby generating mutated cells (initiation). Subsequently, preneoplastic lesions appear through clonal proliferation of the mutated cells and transform into tumors (promotion and progression). Many factors may influence these processes in a dose-dependent manner. Therefore, quantitative analysis plays an important role in studies on the carcinogenic threshold of genotoxic carcinogens. Herein, we present data on the relationship between key carcinogenic events and their deriving point of departure (PoD). Their PoDs were also compared to those of the carcinogenesis pathway. In an experiment, the liver of rats exposed to 2-amino-3,8-dimethylimidazo-(4,5-f)quinoxaline (MeIQx) was examined to determine the formation of MeIQx-DNA adducts, generation of mutations at LacI transgene, and induction of preneoplastic glutathione S-transferase placental form (GST-P)-positive foci and tumors (benign and malignant). The PoDs of the above key events in the carcinogenicity of MeIQx were increased as the carcinogenesis advanced; however, these PoDs were lower than those of tumor induction. Thus, the order of key events during tumor induction in the liver was as follows: formation of DNA adducts ${\ll}$ Mutations ${\ll}$ GST-positive foci (preneoplasia) ${\ll}$ Tumor (adenoma and carcinoma). We also obtained similar data on the genotoxic and carcinogenic PoDs of other hepatocarcinogens, such as 2-amino-3,8-dimethylimidazo(4,5-f)quinoline. These results contribute to elucidating the existence of a genotoxic and carcinogenic threshold.

• Current Optics and Photonics
• /
• 제1권4호
• /
• pp.364-371
• /
• 2017

Compared to one made of glass, an aluminum mirror features light weight, compact design, low cost, and quick manufacturing. Reflective mirrors and supporting structures can be made from the same material, to improve the athermal performance of the system. With the rapid development of ultraprecise machining technologies, the field of applications for aluminum mirrors has been developed rapidly. However, most of them are rotationally symmetric in shape, and are used for infrared applications. In this paper, the design and manufacture of an off-axis aluminum mirror used for a three-mirror-anastigmat (TMA) optical system at visible wavelengths is presented. An optimized, lightweight design provides a weight reduction of more than 40%, while the surface deformation caused by earth's gravity can meet the required tolerance. The two pieces of an off-axis mirror can be diamond-turned simultaneously in one setup. The centrifugal deformation of the off-axis mirror during single-point diamond turning (SPDT) is simulated through the finite-element method (FEM). The techniques used to overcome centrifugal deformation are thoroughly described in this paper, and the surface error is reduced to about 1% of the original value. After post-polishing, the form error is $1/30{\lambda}$ RMS and the surface roughness is better than 5 nm Ra, which can meet the requirements for visible-light imaging.

• Journal of Power Electronics
• /
• 제15권1호
• /
• pp.146-159
• /
• 2015

Since the power capacity needed for the propulsion of large ships is very large, a multiphase AC induction propulsion mode is generally adopted to meet the higher requirements of reliability, redundancy and maintainability. This paper gives a detailed description of the development of a 20MW fifteen-phase PWM driver for advanced fifteen-phase propulsion induction motors with a special third-harmonic injection in terms of the main circuit hardware, control system design, experiments, etc. The adoption of the modular design method for the main circuit hardware design can make the enclosed mechanical structure simple and maintainable. It can also avoid the larger switch stresses caused by the multiple turn on of the IGBTs in conventional large-capacity converter systems. The use of the distributed controller design method based on a high-speed fiber-optic ring net for the control system can overcome such disadvantages as the poor reliability and long maintenance times arising from the conventional centralized controller which is designed according to point-to-point communication. Finally, the performance of the 20MW PWM driver is verified by experimentation on a new fifteen-phase induction propulsion motor.

• Geomechanics and Engineering
• /
• 제16권6호
• /
• pp.589-597
• /
• 2018

Centrifuge model tests were used to simulate pile-raft composite foundation and pile-geogrid composite foundation with different pile spacing for researching the time effect of negative skin friction of rigid piles in high-speed railways. The research results show that the negative skin friction has a significant impact on the bearing capacity of composite foundation. Pile-raft composite foundation has higher bearing capacity compared to pile-geogrid composite foundation to reduce the effect of negative skin friction on piles. Both the foundation settlement and negative skin friction have significant time effect. The distribution of skin friction can be simplified as a triangle along the pile. The neutral point position moves deeper in the postconstruction stage at larger pile spacing. For pile-geogrid composite foundation, the setting of pile-cap affects the position of neutral point in the post-construction stage. Reinforced cushion with geotextile may promote the better performance of cushion for transmitting the loads to piles and surrounding soils. Arching effect in the cushion of the composite foundation is a progressive process. The compression of the rigid piles contributes less than 20% to 25% of the total settlement while the penetration of the piles and the compression of the bearing stratum below the pile tips contribute more than 70% of the total settlement. Some effective measures to reduce the settlement of soils need to be taken into consideration to improve the bearing capacity of pile foundation.