• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.1236-1239
• /
• 2009

Each LCD TFT panel requires a power supply IC on the panel board. The IC provides the power rails for the timing controller, source and gated driver IC and others. The industry trend moves towards higher integrated devices. The challenge for the panel manufacturer is the development and implementation of such an IC in cooperation with the semiconductor supplier. If not done carefully the solution will not reduce the overall solution cost or can't provide the expected performance and reliability. This paper discusses the key considerations to successfully develop and integrate a highly integrated LCD bias IC into the system.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.6 no.2
• /
• pp.35-44
• /
• 2003

A Decal Panel is developed for the Night Vision Imaging System of XKO-1 aircraft. The Decal Panel is a kind of lighting system kits and is installed on each system switch box in crewstation. The Decal Panel consists of upper panel made of polycarbonate and lower panel which is a printed circuit board. This paper includes the design, manufacture, test and evaluation of Decal Panel in addition to items and conditions of environmental test. Besides it is confirmed the Key for manufacturing a decal panel, is depth of paint, dry time period and frequency, and diffusion material for spreading of light.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.160-160
• /
• 2008

In practical etching process, etch ant is sprayed on the metal-deposited panel through nozzles collectively connected to the manifold and that panel is usually composed of many PCB(printed circuit board)'s. The etching uniformity, the difference between individual PCB's on the same panel, has become one of most important features of etching process. In this paper, the prediction of nozzle trajectory has been performed by the combination of algebraic formula and numerical simulation. With the pre-determined geometrical factors of nozzle distribution, the trajectories of individual nozzles were predicted with the change of process operational factors such as panel speed, nozzle swing frequency and so on. As results, two dimensional distribution of impulsive force of etchant spray which could be considered as a key factor determining the etching performance have been successfully obtained. Though only qualitative prediction of etching uniformity have been predicted by the process developed in this study, the expansion to the quantitative prediction of etching uniformity is expected to be apparent by this study.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.283-283
• /
• 2004

공장자동화는 국제사회 속에서 살아 남기 위한 필수 요건이 되었다. 값싼 인건비를 무기로 제품 경쟁에 뛰어 들고 있는 주변국가와 경쟁하기 위해서는 인건비 절감과 품질 향상이 필수적이다. 본 논문은 POS용 키보드의 생산공정 중에서 조립된 키보드 칼라 라벨을 자동 검사하는 시스템 개발을 최종목표로 하였다. 현재, 산업용으로 폭 넓게 사용되고 있는 머신 비전 측정시스템은 흑백의 영상과 비교적 간단한 물체에 초점을 맞추고 있다. 그러나, Fig.1의 POS용 키보드는 일반 컴퓨터용 키보드와는 달리 각각의 키가 칼라 라벨로 되어있기 때문에 기존의 흑백 머신 비전 시스템으로 자동화를 구축하기는 힘들다.(중략)

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.05a
• /
• pp.369-372
• /
• 2002

In this research, a vision system for detecting tool breakage which is hardly detected by such indirect in-process measurement method as acoustic emission, cutting torque and motor current was developed and embedded into a PC-NC system. The vision system consists of CMOS image sensors, a slit beam laser generator and an image grabber board. Slit beam laser was emitted on the tool surface to separate the tool geometry well from the various obstacles surrounding the tool. An image of tool is captured through two steps of signal processing, that is, median filtering and thresholding and then the tool is estimated normal or broken by use of change of the centroid of the captured image. An air curtain made by the jetting high-pressure air in front of the lens was devised to prevent the vision system from being contaminated by scattered coolant, cutting chips in cutting process. To embed the vision system to a Siemens PC-NC controller 840D NC, an HMI(Human Machine Interface) program was developed under the Windows 95 operating system of MMC103. The developed HMI is placed in a sub window of the main window of 840D and this program can be activated or deactivated either by a soft key on the operating panel or M codes in the NC part program. As the tool breakage is detected, the HMI program emit a command for automatic tool change or send alarm to the NC kernel. Evaluation test in a high speed tapping center showed the developed system was successful in detection of the small-radius tool breakage.

• Journal of Biomedical Engineering Research
• /
• v.23 no.2
• /
• pp.165-170
• /
• 2002

The aim of this study was to analyze the effect of different sensory information on the motor function which is resulted from visual stimuli. Particularly, it was focused on the effect of complementary color stimuli on reaction time. Twenty volunteers(10 men & 10 women), between the age of 20 and 25 yearn participated in this experiment. Experiments were carried out in a light & sound-attenuated chamber, and the overall system consisted of a PC. interface card. LEDs. key board switch, and display panel. Although many measurements of sensory-motor integration has been studied the quantitative analysis of sensory-motor integration has not been developed well. Quantitative analyses were performed to investigate the effect of the different sensory information on the arm motor system in the point of view sensory-motor integration. The result showed that the reaction time for visual stimuli of complementary colors was faster than that under same color environments : and, in same color environments and the reaction speed was varied inversely with respect to the magnitude of the light wavelength.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.5 no.7
• /
• pp.1332-1339
• /
• 2001

SoC(System on Chip) technology is widely used in the field of embedded systems by providing high flexibility for a specific application domain. An important aspect of development any new embedded system is verification which usually requires lengthy software and hardware co-design. To reduce development cost of design effort, the instruction set of microprocessor must be suitable for a high level language compiler. And FPGA prototype system could be derived and tested for design verification. In this paper, we propose a 16 bit FPGA microprocessor, which is tentatively-named EISC16, based on an EISC(Extendable Instruction Set Computer) architecture for embedded applications. The proposed EISC16 has a 16 bit fixed length instruction set which has the short length offset and small immediate operand. A 16 bit offset and immediate operand could be extended using by an extension register and an extension flag. We developed a cross C/C++ compiler and development software of the EISC16 by porting GNU on an IBM-PC and SUN workstation and compared the object code size created after compiling a C/C. standard library, concluding that EISC16 exhibits a higher code density than existing 16 microprocessors. The proposed EISC16 requires approximately 6,000 gates when designed and synthesized with RTL level VHDL at Xilinix's Virtex XCV300 FPGA. And we design a test board which consists of EISC16 ROM, RAM, LED/LCD panel, periodic timer, input key pad and RS-232C controller. 11 works normally at 7MHz Clock.

• Journal of Arbitration Studies
• /
• v.24 no.2
• /
• pp.3-31
• /
• 2014

As all aspects of international activity have kept growing in good transaction, transnational investments, joint ventures, and the licensing of intellectual property, it is inevitable for disputes to increase across national frontiers. International disputes can be settled by arbitration and ADR. In the situation presented in the paper, any dispute shall be finalized by arbitration and conciliation in the Gaeseong Industrial Complex. Inter-Korean Commercial Arbitration in the Gaeseong Industrial Complex has become the principal method of resolving disputes in trade, commerce, and investment in accordance with the "Agreement on South-North Commercial Dispute Settlement Procedures," "Agreement on Organization and Operation of Inter-Korean Commercial Arbitration Committee," and the Annexed Agreement on "Organization and Operation of Inter-Korean Commercial Arbitration Committee" (2013). But the follow-up measures of the said agreements have not been fulfilled. Some prerequisite measures of the Inter-Korean commercial arbitration must be satisfied. In order to proceed with arbitration and conciliation in the Gaeseong Industrial Complex, we need to ask the following: Does the status of an arbitrational matter? Should an agreement to arbitrate contain a choice of law clause? Should one provide for one arbitrator or three? How should the arbitrators be selected? What is the relation between party-appointed arbitrators and the presiding arbitrator (neutral arbitrator)? Do arbitrators compromise more than the litigation? Can conciliation be combined with arbitration? To execute the enactment of arbitration regulations, the contents of the Arbitration Rules of the Korean Commercial Arbitration Board (South) and the Korea International Trade Arbitration Committee (North), together with the Korean Arbitration Act and External Arbitration Act of North Korea and the UNCITRAL Model Arbitration Law and UNCITRAL l Arbitration Rules are reflected in the Rules. There are many aspects of the Inter-Korean Commercial Arbitration. It is essential to understand key elements; namely, the arbitration agreement, appointment of arbitrator, arbitral proceeding and arbitral award, and enforcement and setting aside of arbitral award. This research deals with five chapters. Chapter 1 provides the introduction. Chapter 2 deals with trade volume between South and North Korea and the kinds of dispute in Gaeseong. Chapter 3 addresses contents and follow-up measures of the agreement on the "South-North Commercial Dispute Settlement Procedures," "Agreement on Organization and Operation of Inter-Korean Commercial Arbitration Committee," and the Annexed Agreement on "Organization and Operation of Inter-Korean Commercial Arbitration Committee" (2013). Chapter 4 features the problems and tasks of the pertinent agreements. Chapter 5 gives the conclusion. Enabling parties to find an amicable solution to the dispute in the Gaeseong Industrial Complex can lead to a useful and appropriate framework either through direct negotiation or by resorting to conciliation or mediation in accordance with pertinent agreements and follow-up measures contained in the agreements.