• Journal of Forest and Environmental Science
• /
• v.34 no.4
• /
• pp.352-358
• /
• 2018

This research paper investigates available options for implementing clean development mechanism (CDM) project in Sarawak state, Malaysia. To investigate economic feasibility, data was collected using survey and field research methods. Also, economic analysis was estimated using net present value (NPV), internal rate of return (IRR) and payback period (PBP) during the 30 years CDM: afforestation and reforestation periods. The result of economic analysis indicated that, the payback period was estimated at 9 years with 18 percent of internal rate of return (IRR). This study also highlighted that CDM biomass supply project have a lot of challenges due to the reduction and exclusion of bio-Solid Recovered Fuel (SRF), supply and demand scenario, and impact of restriction of illegal logging in Malaysia. This study results demonstrate the methodology and guideline for future CDM investment and projects.

• Journal of Microbiology and Biotechnology
• /
• v.19 no.8
• /
• pp.760-764
• /
• 2009

In this study, we investigated the antifungal activity of three different forms of silver nanoparticles against the unidentified ambrosia fungus Raffaelea sp., which has been responsible for the mortality of a large number of oak trees in Korea. Growth of fungi in the presence of silver nanoparticles was significantly inhibited in a dose-dependent manner. We also assessed the effectiveness of combining the different forms of nanoparticles. Microscopic observation revealed that silver nanoparticles caused detrimental effects not only on fungal hyphae but also on conidial germination.

• Journal of Forest and Environmental Science
• /
• v.34 no.1
• /
• pp.87-94
• /
• 2018

This study proposes a strategy for the creation and management of urban forests in Paju Heyri art village. Urban forest composition attributes (4 categories and 16 items) were extracted and the questionnaire was asked to the level and the current level for tourists, local residents and workers in Paju Heyri art village. And the priority order for the creation of urban forests was derived through the difference between the present level (performance) and the required level (importance) and the requirements analysis procedure. In this study, the priorities of each item of urban forest formation attributes were determined. The t-test alone had limitations, so we calculated the Borich needs which were not covered by the existing Importance - Performance Analysis (IPA). We used the Locus for Focus Model, which is a method for visually confirming the difference between the current level and the required value for the required level in the 4-quadrant coordinate plane. The results of this study show that the seven priorities can be used as a useful tool for the formulation of urban forests and operational strategies and can be a basic research for the activation of urban forests in the future.

• 한국약용작물학회:학술대회논문집
• /
• 2007.05a
• /
• pp.151-152
• /
• 2007

• Journal of Forest and Environmental Science
• /
• v.29 no.4
• /
• pp.314-323
• /
• 2013

To examine surface erosion and sediment export patterns on a hillslope, which was devastated by a shallow landslide and which was slowly revegetating by natural plant species, we surveyed variations in surface erosion depth on the upper-, middle- and lower-section of the hillslope, and subsequent sediment yield from the whole hillslope. The result showed that, with the passing of year, surface erosion on the devastated hillslope was regulated by higher rainfall intensity due to the supply-limitation of exportable sediment, and its variation range decreased. In addition, surface erosion on the upper-section with steep slope was regulated by higher rainfall intensity, which might result in raindrop erosion, compared to it on the lower-section with relatively gentle slope. Besides, the sediment yield from the devastated hillslope had nonlinear relationship with surface erosion depth on the hillslope because sediments on the hillslope are exported downwards while repeating their cycle of transport and redistribution. Our findings suggest the establishment of management strategy to prevent sediment-related disasters occurred during torrential rainfall events, which was based on the continuous field investigation on the hillslope devastated by landslides.

• Journal of Forest and Environmental Science
• /
• v.23 no.2
• /
• pp.79-85
• /
• 2007

This survey was carried out to investigate the utilization situation of fire-wood boiler by the questionnaire and personal interview on rural and mountain households of Gangwon province from 1998 to 2005. The questionnaire include 7 questions on installation, 7 questions on fuel, 3 questions on use, and 3 questions on improvement. Each question was analyzed by percentage to investigate the use situation. This survey indicated that the general problems in use of fire-wood boiler are fuel purchase, collection and transportation, that the development of the household heating boiler using wood-based forming fuel which is cheap, small volume, easy handling, convenient purchase and high heat efficiency could be an alternative to improve the problems and that the continuous expansion of the supply of fire-wood boiler can prevent the devastation of forest through the regulation of imprudent fuel supply. Although the financial aid plan on the installation of fire-wood boiler is in active, many petty households in rural and mountain areas lose a chance to install the fire-wood boiler due to the unsatisfactory information. Thus, it will be desirable for municipal government to prepare the information plan to offer the equal chance and condition to all households in rural and mountain areas and to increase the financial aid for the continuous supply of fire-wood boiler.

• Journal of Forest and Environmental Science
• /
• v.39 no.4
• /
• pp.254-260
• /
• 2023

A sensor system has been developed that uses an ultrasonic sensor to detect the downhill slope on the side of a forest road and prevents a vehicle-type forest machine from rolling down a mountainside. A specular reflection of ultrasonic wave might cause severe issues in measuring distances to targets. By investigating the installation angle of the sensor to minimize the negative effects of specular reflection, the installation angle of lateral monitoring ultrasonic sensor could be determined based on the width of road shoulder. Obstacles such as small rocks or piece of log in a forest road may cause the forest machine to be overturned while the machine riding over due to excessive its posture change. It was determined that the laser sensor could be a part of a sensor system capable of specifying the location and size of small obstacles. Not only this sensor system including ultrasonic and laser sensors can issue a warning of dangerous sections to drivers in forest forwarders currently in use, but also it can be used as a driving safety sensor in autonomous forest machine or remote-control forest machine in the future.

• Journal of Forest and Environmental Science
• /
• v.14 no.1
• /
• pp.157-164
• /
• 1998

• Journal of Forest and Environmental Science
• /
• v.33 no.2
• /
• pp.147-153
• /
• 2017

The purpose of this study was to examine productivity and cost of tree-length harvesting using cable yarding system in a larch (Larix leptolepis) clear-cutting stand located in Pyeongchang-gun, Gangwon-do. We used tree-length harvesting method using cable yarding system with a tower yarder HAM300. The productivity was $17.6m^3/hr$ for felling, $12.4m^3/hr$ for delimbing, $4.2m^3/hr$ for yarding, and $8.1m^3/hr$ for processing. The total cost of the harvesting system was $48,381won/m^3$, which was majorly composed of yarding operation cost, at $40,169won/m^3$ (79.3%), while felling had the lowest cost at $1,154won/m^3$ (4.1%). Major factors affecting felling and processing productivity was tree volume and the number and thickness of branches for delimbing productivity. In addition, we suggest that training and education for machine operators were critical to improve yarding productivity.

• Journal of Forest and Environmental Science
• /
• v.27 no.1
• /
• pp.33-37
• /
• 2011

This study was carried out to establish a proper cultivation site and diagnose the drought-tolerance of Allium ochotense leaves and Allium microdictyon leaves by using pressure - volume curve method. The Allium microdictyon leaves had more lower osmotic water potential ${\psi}osat$, and osmotic water potential at turgor loss point ${\psi}otlp$ than Allium ochotense leaves. Then, the Allium microdictyon leaves was slightly higher drought-tolerance than Allium ochotense leaves. Therefore, We suggest that growth of the two Allium species was appropriate for relative moisture forest.