• 항공우주시스템공학회지
• /
• 제16권3호
• /
• pp.63-72
• /
• 2022

본 논문에서는 전개형 메쉬 안테나의 동적 강성 설계 및 다물체 동역학을 이용한 요구되는 구동력 및 전개 특성을 분석하고자 한다. 프레임(frame) 요소를 이용하여 전개 구조물을 모델링한다. 다각(polygon) 형상 전개 구조물의 전개/수납된 형상에 따른 고유치 문제를 분석하였다. Kane's 방정식을 이용하여 전개 구조물의 다물체 동역학 방정식을 유도하고 PUTD (pseudo upper triangular decomposition) 방법을 적용하여 구속조건 문제를 해결하였다. 고유진동 해석 및 다물체 동역학 시뮬레이션을 통해 설계된 전개형 구조의 구조 동특성 및 실현성을 살펴보고자 한다.

• 한국항공우주학회지
• /
• 제50권10호
• /
• pp.691-699
• /
• 2022

본 논문에서는 대형 메쉬 안테나 개발을 위한 모듈식 전개형 반사판 및 붐 구조의 전개 시 요구되는 구동력 및 전개 특성을 분석하고자 한다. 단위 전개 구조를 이용하여 모듈식 전개형 반사판 링과 붐 구조의 수납/전개된 형상을 분석하였다. Kane's 방정식을 이용하여 전개 구조물의 다물체 동역학 방정식을 유도하고 PUTD(Pseudo Upper Triangular Decomposition) 방법을 적용하여 구속조건 문제를 해결하였다. 다물체 동역학 시뮬레이션을 통해 설계된 모듈식 전개 반사판 링 그리고 붐 구조의 동적 특성을 살펴보고자 한다.

• 한국추진공학회지
• /
• 제13권3호
• /
• pp.41-49
• /
• 2009

본 논문은 공기흡입식 추진기관의 고체 로켓 부스터 분리에 관한 수학적 모델링과 시뮬레이션 기법을 기술하였다. 비행체 및 부스터는 하나의 다물체(multi-body)로 고려하였고 부스터는 단지 비행체의 축 방향으로 움직이는 것으로 가정하였다. 비행체 및 부스터의 동적 운동은 Kane 방법에 의해 모델링 되었다. 다양한 부스터 위치에 따라 전체 시스템에 작용하는 공력은 DATCOM 소프트웨어를 사용하여 산출되었으며 부스터 분리 유효 작용면에 작용하는 내부 분리 압력은 일반적인 기체역학 및 Taylor-MacColl 관계식에 의해 산출되었다. 수치적 해석은 Mathworks사의 Matlab이 사용되었다. 해석 결과에 의하면 부스터 분리 동안 마하수 및 받음각 변화 등은 크지 않는 것으로 나타났으며, 실제 시험 장치를 이용한 부스터 분리 시험이 진행될 경우 자세 각 변화, 흡입 유동 특성 등은 무시할 만한 수치임을 확인할 수 있었다.

• 한국운동역학회지
• /
• 제15권3호
• /
• pp.143-152
• /
• 2005

The purpose of this study was to predict the failure or success of the Snatch-lifting trial as a consequence of the stand-up phase simulated in Kane's equation of motion that was effective for the dynamic analysis of multi-segment. This experiment was a case study in which one male athlete (age: 23yrs, height: 154.4cm, weight: 64.5kg) from K University was selected The system of a simulation included a multi-segment system that had one degree of freedom and one generalized coordinate for the shank segment angle. The reference frame was fixed by the Nonlinear Trans formation (NLT) method in order to set up a fixed Cartesian coordinate system in space. A weightlifter lifted a 90kg-barbell that was 75% of subject's maximum lifting capability (120kg). For this study, six cameras (Qualisys Proreflex MCU240s) and two force-plates (Kistler 9286AAs) were used for collecting data. The motion tracks of 11 land markers were attached on the major joints of the body and barbell. The sampling rates of cameras and force-plates were set up 100Hz and 1000Hz, respectively. Data were processed via the Qualisys Track manager (QTM) software. Landmark positions and force-plate amplitudes were simultaneously integrated by Qualisys system The coordinate data were filtered using a fourth-order Butterworth low pass filtering with an estimated optimum cut-off frequency of 9Hz calculated with Andrew & Yu's formula. The input data of the model were derived from experimental data processed in Matlab6.5 and the solution of a model made in Kane's method was solved in Matematica5.0. The conclusions were as follows; 1. The torque motor of the shank with 246Nm from this experiment could lift a maximum barbell weight (158.98kg) which was about 246 times as much as subject's body weight (64.5kg). 2. The torque motor with 166.5 Nm, simulated by angular displacement of the shank matched to the experimental result, could lift a maximum barbell weight (90kg) which was about 1.4 times as much as subject's body weight (64.5kg). 3. Comparing subject's maximum barbell weight (120kg) with a modeling maximum barbell weight (155.51kg) and with an experimental maximum barbell weight (90kg), the differences between these were about +35.7kg and -30kg. These results strongly suggest that if the maximum barbell weight is decided, coaches will be able to provide further knowledge and information to weightlifters for the performance improvement and then prevent injuries from training of weightlifters. It hopes to apply Kane's method to other sports skill as well as weightlifting to simulate its motion in the future study.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집B
• /
• pp.488-494
• /
• 2001

Many literatures, so far, have concentrated on approaches employing dependent coordinates set resulting in computational burden of constraint forces, which is needless in many cases. Some researchers developed methods to remove or calculate it efficiently. But systematic generation of the motion equation using independent coordinates set by Kane's equation is possible for any closed loop system. Independent velocity transformation method builds the smallest size of motion equation, but needs practically more complicated code implementation. In this study, dependent velocity matrix is systematically transformed into independent one using dependent-independent transformation matrix of each body group, and then motion equation free of constraint force is constructed. This method is compared with the other approach by counting the number of multiplications for car model with 15 d.o.f..

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.1580-1586
• /
• 2003

This paper presents the design and the analysis of a "fish-like underwater robot". In order to develop swimming robot like a real fish, extensive hydrodynamic analysis were made followed by the study of biology of the fishes especially its maneuverability and propel styles. Swimming mode is achieved by mimicking fish-swimming of carangiform. This is the swimming mode of the fast motion using its tail and peduncle for propulsion. In order to generate configurations of vortices that gives efficient propulsion yawing and surging with a caudal fin has applied and in order to submerge and maintain the body balance pitching and heaving motion with a pair of pectoral fin is used. We have derived the equation of motion of PoTuna by two methods. In first method, we use the equation of motion of underwater vehicle with the potential flow theory for the power of propulsion. In second method, we apply the method of the equation of motion of UVM(Underwater Vehicle-Manipulator). Then, we compare these results.

• 한국항공우주학회지
• /
• 제47권10호
• /
• pp.705-711
• /
• 2019

전개형 반사판 안테나의 전개거동 특성을 해석적 그리고 실험적 방법으로 분석하고자 한다. Kane 방정식을 이용하여 전개형 안테나의 다물체 운동방정식을 공식화하였다. 복합재료 반사판의 구조변형 특성을 살펴보기 위해 FSDT(First-order Shear Deformation Theory)를 이용하여 빔 모델로 유한요소 정식화 하였다. 역진자 모델을 이용하여 안테나 전개시간에 따른 스프링 상수 그리고 댐핑 계수들을 결정하였다. 다물체 동력학 해석을 통하여 설계변수에 따른 안테나 반사판의 동적구조 특성을 확인하였고, 무중력 모사 전개실험을 통하여 해석결과 검증 및 거동특성을 실험적으로 관찰하였다.

• 대한기계학회논문집A
• /
• 제22권4호
• /
• pp.768-778
• /
• 1998

Human beings usually absorb a shock from terrain during walking through the damping effects of joints, muscles and skin. With this analogy, a robot-leg with a shock absorber is built to absorb the impact forces at its foot during high-speed walking on irregular terrain. To control the hip position while walking, the dynamic controller suitable for high speed walking is designed and implemented based on a dynamic model by Kane's equation. The hip position tracking performances of various controllers (PID controller, computed torque controller and feedforward torque controller) are compared through the experiments of the real robot-leg.

• 대한기계학회논문집A
• /
• 제21권5호
• /
• pp.756-768
• /
• 1997

In order to control a dynamic gait of quadrupedal walking robot, the equations of motion of the whole mechanism are required. In this research, the equations of motion are formulated analytically using Kane's dynamic approach. As a dynamic gait model, a trot gait has been adopted. The degree of freedom of whole mechanism could be reduced to 7 by idealizing the kinematic feature of the trot gait. Using the equations of motion formulated, the results of the redundant-joint torque analysis and the simulation of dynamic walking motion are presented.

• Journal of Electrical Engineering and Technology
• /
• 제12권5호
• /
• pp.2014-2020
• /
• 2017

A compact current model applicable to both single-gate (SG) and double-gate (DG) tunneling field-effect transistors (TFETs) is presented. The model is based on Kane's band-to-band tunneling (BTBT) model. In this model, the well-known and previously-reported quasi-2-D solution of Poisson's equation is used for the surface potential and length of the tunneling path in the tunneling region. An analytical tunneling current expression is derived from expressions of derivatives of local electric field and surface potential with respect to tunneling direction. The previously reported correction factor with three fitting parameters, compensating for superlinear onset and saturation current with drain voltage, is used. Simulation results of the proposed TFET model are compared with those from a technology computer-aided-design (TCAD) simulator, and good agreement in all operational bias is demonstrated. The proposed SG/DG-TFET model is developed with Verilog-A for circuit simulation. A TFET inverter is simulated with the Verilog-A SG/DG-TFET model in the circuit simulator; the model exhibits typical inverter characteristics, thereby confirming its effectiveness.