• Archives of Plastic Surgery
• /
• v.47 no.1
• /
• pp.9-14
• /
• 2020

Background Eyelids vary in morphology and structure depending on age, sex, and race. Usually, one-dimensional measurements are used to evaluate blepharoplasty outcomes. However, in recent years, three- or four- directional enlargements of the eyelid have been used for blepharoplasty in Asian patients, and the outcomes of techniques such as lateral canthoplasty or canthotomy and medial epicanthoplasty with increased scleral area cannot be analyzed using marginal reflex distance 1 or the area of corneal exposure. Therefore, we describe the use of a measurement method based on the eyeball exposure area (EEA). Methods To obtain normal EEA values by age and sex, 320 individuals were recruited. The participants were divided into eight age groups (n=40 in each group: female subjects, n=20; male subjects, n=20): 10-19, 20-29, 30-39, 40-49, 50-59, 60-69, 70-79, and 80-89 years. The EEA value was obtained by dividing the exposed area by the total eyeball area. The normal EEA values and differences in EEA according to age and sex were calculated. Results The mean EEA values for male and female subjects were 66.86% ±9.20% and 71.48%±10.48%, respectively. In each age group, the EEA values of females were higher than those of males. EEA decreased significantly with age in both male and female subjects (P<0.05). Conclusions We determined normal EEA values according to age and sex. EEA can be used as an indicator of the outcome of blepharoplasty.

• Journal of Biosystems Engineering
• /
• v.30 no.1 s.108
• /
• pp.8-16
• /
• 2005

The extrusion-cooking condition on Cordyceps pruinosa was designed using twin-screw extruder. Response surface methodology (RSM) was used to investigate extrusion-cooking using a central composition design with varying die temperature $(114-146^{\circ}C)$, feed moisture $(22-38\%)$, feed rate (4-14 ka/h) and screw speed (120-280 rpm). System parameters (die pressure and specific mechanical energy (SME)) and extrudate parameters (density and water solubility index (WSI)) were statically analyzed using RSH. Die pressure was significantly affected by temperature, moisture contents and feed rate. SM was affected by screw speed and feed rate. When die temperature is $130^{\circ}C$ and moisture content $25\%$, the optimum pressure is shown. SME is about 20 Wh/kg, when feed rate is $10\~12kg/min$ and screw speed $200\~250rpm$. WSI was affected by temperature and moisture contents. Density was not affected by any factor. WSI increases by $7\%$ from about $23\%$ to about $30\%$, as temperature is raised from $120^{\circ}C\;to\;140^{\circ}C$. The WSI of Cordyceps pruinosa pulverized after extruding (PE) is about $26.97\%$ higher than that of raw material and $10\%$ higher than that of pulverized after drying (PD). The content of unsaturated fatty acid were not significantly different in PD and PE. Anti-oxidative activity of PE was 1.67-2.2 times higher than that of PD in Cordyceps pruinosa using 1- dipheny1-2-picrylhydrazyl method (DPPH).

• Journal of Microbiology and Biotechnology
• /
• v.18 no.3
• /
• pp.560-567
• /
• 2008

An efficient method to produce water-soluble polysaccharides from Lentinus lepideus is described. The productivity of both endopolysaccharides (PPS) and exopolysaccharides (EPS) was compared under various culture conditions. The effect of treating their own PPS and EPS on immune cytokine production was also studied in relation to culture factors. High yield production of EPS required a moderate culture temperature $(25^{\circ}C)$ as well as long culture period (16-20 days). In contrast, PPS production required a high culture temperature $(30^{\circ}C)$ and short culture period (8 days). Most of the carbon sources did not affect polysaccharides and mycelial production except for sucrose. Immune cytokine levels in the EPS treatment varied among carbon sources or culture periods. PPS did not appear to affect much on the production of cytokines, regardless of the culturing factors, except for the culture period. These results suggest that the optimal culture conditions for L. lepideus vary according to culture purposes, and different culture conditions should be used for different targets including mycelial biomass, EPS, and PPS. Whereas the immunomodulating activitiy of EPS appeared to be affected by culture conditions in L. lepideus, that of PPS did not.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.69.2-69.2
• /
• 2010

Recently, bulk hetero-junction cells have been extensively studied by many researchers. Most of these cells were fabricated by spin coater. However, the spin coating process is not favorable to the large-scaled industry because it is not compatible with roll-to-roll process. One of the alternative methods is Doctor blading. In this study, we fabricated large OPV cells having total area of $100cm^2$. The buffer layer was Poly-(3,4-ethylenedioxythiophene) : poly-(styrenesulfonate) aqueous dispersion (PEDOT:PSS) and the active material is poly (3-hexythiophene) (P3HT) and phenyl-C61-butyric acid methyl ester (PCBM) blend in the solvent of Chlorobenzene. All of the organic layers were coated by dragging the blade with a speed of 5~20 mm/s on the stage with a temperature of $50^{\circ}C$. As-bladed PEDOT:PSS layer was baked at $120^{\circ}C$ for 10 minutes to eliminate the water. The cell structure is patterned ITO substrate/PEDOT:PSS/P3HT:PCBM/LiF/Al. The topmost electrode, LiF/Al, was deposited by thermal evaporation. After depositing electrode, and the cell was annealed at $150^{\circ}C$ for 30 minutes. The measured ISC, VOC, fill factor, and PCE were 2.95 A, 5.86 V, 0.32, and 0.78%, respectively. PCE was quite low but the large active area could be obtained successfully.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.12
• /
• pp.3215-3226
• /
• 1996

In this paper a K-band harmonic oscillator competitive to ordinary Push-Push type oscillators is introduced. This oscillator is composed of two-X-band dielectric resonance circuits. To favor its harmonic generation, the load effect and the bias effect are studied to allow the maximum harmonic distortion. As results, the dielectric resonated load and the class A bias are used for the 2nd harmonic generation. analytical study for modelling of voltage controlled dielectric resonator is carried out with theoretical background. The performance of the circuit is evaluated by simulation using harmonic balanced method. The novel structure has ont only a voltage tuning circuit but also an output port at fundamental frequency as the function of prescaler for phase lockede loop application on the just single oscillation structure. In experimentation, the output freqneyc of the 2nd harmonic signal is 20.5GHz and the maximum power level of output is +5.5dBm without additional post amplifiers. the harmonic oscillator exhibits -30dBc of high fundamental frequency rejection without added extra filters. The phase noise of -90dBc/Hz at 100kHz off-carrier has been achieved under free running condition, that satisfies phase noise requirement of IESS 308. The proposed oscillator may be utilized as the clean and stable fixed local oscillator in Transmit Block Upconvertor(TBU) or Low oise Block downconvertor(LNB) for K/Ka-band digital communications and satellite broadcastings.

• Korean Journal of Remote Sensing
• /
• v.15 no.4
• /
• pp.367-375
• /
• 1999

This paper describes the development, operations, and applications of ROCSAT-l and its Ocean Color Imager (OCI) remote-sensing payload. It is the first satellite program of NSPO. The satellite was successfully launched by Lockheed Martin's Athena on January 26, 1999 from Cape Canaveral, Florida. ROCSAT-l is a Low Earth Orbit (LEO) experimental satellite. Its circular orbit has an altitude of 600km and an inclination angle of 35 degrees. The satellite is designed to carry out scientific research missions, including ocean color imaging, experiments on ionospheric plasma and electrodynamics, and experiments using Ka-band (20∼30GHz) communication payloads. The OCI payload is utilized to observe the ocean color in 7 bands (including one redundant band) of Visible and Near-Infrared (434nm∼889nm) range with the resolution of 800m at nadir and the swath of 702km. It employs high performance telecentric optics, push-broom scanning method using Charge Coupled Devices (CCD) and large-scale integrated circuit chips. The water leaving radiance is estimated from the total inputs to the OCI, including the atmospheric scattering. The post-process estimates the water leaving radiance and generates different end products. The OCI has taken images since February 1999 after completing the early orbit checkout. Analyses have been performed to evaluate the performances of the instrument in orbit and to compare them with the pre-launch test results. This paper also briefly describes the ROCSAT-l mission operations. The spacecraft operating modes and ROCSAT Ground Segment operations are delineated, and the overall initial operations of ROCSAT-l are summarized.

• Applied Biological Chemistry
• /
• v.30 no.1
• /
• pp.1-8
• /
• 1987

The distribution of the surface charges in two kinds of peats and their physico-chemical properties have a been studied by means of the potentiometric titration and by ion adsorption in different strength of electrolytes. The organic matter contents were 43.3% and 53.7% in Yeong Yang peat and Peong Tack peat, respectively. Their X-ray diffractograms showed that quartz was dominant in both peats, and illite, kaolinite, hydrated-halloysite and feldspars were contained in a trace. Total acidic group contents was 1.257me/g in Poeng Tack peat that was a little more than of Peong Yang heat were pKa values of Yeong Yang and Poeng Tack peat were 13.1 and 12.65, respectively. The titration curves at different ionic strength of electrolytes crossed at pH 3.9 and 4.4 in Yeong Yang peat, and pH 3.8 and 4.0 in Peong Tack peat. The pH ranges of suspensions when the net surfacecharge of the peats varied from positive to negative value were $pH\;4.55{\sim}5.20\;(NaCl)$ and $pH\;3.95{\sim}5.70\;(CaCl_2)$ in Yeong Fang peat, and $pH\;4.15{\sim}5.40\;(NaCl)$ and $pH\;3.80{\sim}4.15\;(CaCl_2)$ in Peong Tack peat. Therefore it is apparent that the zero point of charge of these peats was about pH 4.0.

• The Korean Journal of Quaternary Research
• /
• v.18 no.1 s.22
• /
• pp.21-30
• /
• 2004

The Ilgwang Fault is NNE-striking, elongated 40 Km between Ulsan and Haeundae-ku, Busan in southeastern part of the Korean Peninsula. This paper si mainly concerned about the ages of the fault activities especially in the Quaternary, inferred from classification of geomorphic surfaces and trench excavation for the construction of Singori nuclear power plant. The geomorphic surfaces are classified into Beach and the Alluvial plain, the 10 m a.s.l. Marine terrace(MIS 5a), the 20 m a.s.l. Marine terrace(MIS 5e), the Reworked surface of 45 m a.s.l. Marine terrace(MIS 7 or 9) and the Low relief erosional surface. The Low relief erosional surface is distributed coastal side, the Reworked surface of 45m a.s.l. Marine terrace inland side by the Ilgwang Fault Line as the boundary line. But the former is above 10 m higher in relative height than the latter. The 20 m a.s.l. Marine terrace on the elongation line of the Ilgwang Fault reveals no dislocation. A site was trenched on the straight contact line with $N30^{\circ}E$-striking between the 10 m a.s.l. Marine terrace and the 20 m a.s.l. Marine terrace. Fault line or dislocation was not observable in the trench excavation. Accordingly, the straight contact line is inferred as the ancient shore line of the 10 m a.s.l. Marine terrace. The Ages of the Fault activities are inferred after the formation of the Ichonri formation - before the formation of the 45 m a.s.l. Marine terrace(220 Ka. y. B.P. or 320. Ka. y. B.P.). The Low relief erosional surface was an island above the sea-level during the formation of the 45 m a.s.l. marine terrace in the paleogeography.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.37 no.5
• /
• pp.598-604
• /
• 2008

This study was carried out to develop a new traditional alcoholic beverage by using lily scale in order to utilize lily scale as a new matter for nutritious foods. The condition of alcohol fermentation was investigated by the addition of 2.5, 5.0, 7.5, 10.0, 12.5 and 15.0% dried lily scale and 10, 20, 30, 40 and 50% raw lily scale into mash, respectively. The maximum amount of ethanol was produced when 15% dried lily scale and 20% raw lily scale were added to cooked rice at $25^{\circ}C$ for 10 days. In overall acceptability of sensory evaluation, the LSD-5 alcoholic beverage (added 5% dried lily scale into mash) and LSR-20 alcoholic beverage (added 20% raw lily scale into mash) showed the best acceptability. Physiological functionalities of LSD-5 and LSR-20 alcoholic beverage were investigated. Electron donating ability by DPPH solution ($16.5{\sim}23.2%$), SOD-like activity ($20.4{\sim}24.7%$), ACE inhibitory activity ($24.7%{\sim}78.2%$) and tyrosinase inhibitory activity ($57.4{\sim}62.6%$) of LSD-5 and LSR-20 alcoholic beverage were better than the control (non-added liquor). Moreover, acceptability and physiological functionalities of LSD-5 alcoholic beverage are better than LSR-20.

• The Korean Journal of Mycology
• /
• v.46 no.2
• /
• pp.145-160
• /
• 2018

Members of Chlorociboria are soft-rot ascomycetes that produce blue-green pigment. We investigated the growth characteristics of two Korean species of Chlorociboria, eight strains of Chlorociboria aeruginascens and Chlorociboria poutoensis, under various culture conditions (solid media, temperature, pH) and screened them for extracellular enzyme activity. Although the growth rate was slow, all tested strains of Chlorociboria spp. grew well on potato dextrose agar (PDA; 16.3~42.6 mm after 60 days) or Sabouraud dextrose agar (SDA), but not on malt extract agar (MEA). Compared with C. aeruginascens strains, C. poutoensis strains exhibited higher expression of blue-green pigments on both PDA and SDA media. The optimal temperature for mycelial growth was $20{\sim}25^{\circ}C$, and mycelial growth was lower at $30^{\circ}C$ than at $10^{\circ}C$. All strains tended to have increased mycelial growth as the incubation temperature increased in the range of 10 to $20^{\circ}C$. The optimal pH of potato dextrose broth (PDB) for mycelial growth varied according to the strain under static culture conditions. Maximum biomass production was obtained at pH 6.0 for NIFoS 579 ($114.3{\pm}5.1mg/60days$), but it maintained a stable pigment expression under a broad pH spectrum. The activities of both cellulase and laccase were observed in all tested strains of Chlorociboria spp. Enzyme activities of NIFoS 579 were remarkably higher than those of the other strains. From these results, we suggest that C. poutoensis NIFoS 579 is a potential candidate for use as a source of natural blue-green dye.