• IEMEK Journal of Embedded Systems and Applications
• /
• v.13 no.1
• /
• pp.45-51
• /
• 2018

In this paper, a tentative Kth order Newton-Raphson's floating point number Nth root algorithm for K order convergence rate in one iteration is proposed by applying Taylor series to the Newton-Raphson root algorithm. Using the proposed algorithm, $F^{-1/N}$ and $F^{-(N-1)/N}$ can be computed from iterative multiplications without division. It also predicts the error of the algorithm iteration and iterates only until the predicted error becomes smaller than the specified value. Since the proposed algorithm only performs the multiplications until the error gets smaller than a given value, it can be used to improve the performance of a floating point number Nth root unit.

• Smart Structures and Systems
• /
• v.17 no.1
• /
• pp.1-15
• /
• 2016

Rayleigh wave velocity along a straight survey line on a concrete plate is measured in order to compare different non-destructive data acquisition techniques. Results from a rolling non-contact data acquisition system using air-coupled microphones are compared to conventional stationary accelerometer results. The results show a good match between the two acquisition techniques. Rolling measurements were found to provide a fast and reliable alternative to stationary system for stiffness determination. However, the non-contact approach is shown to be sensitive to unevenness of the measured surface. Measures to overcome this disadvantage are discussed and demonstrated using both forward and reverse rolling measurements.

• TTA Journal
• /
• s.111
• /
• pp.39-44
• /
• 2007

• Digital Contents
• /
• no.5 s.132
• /
• pp.20-20
• /
• 2004

• Digital Contents
• /
• no.11 s.138
• /
• pp.47-47
• /
• 2004

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.3C
• /
• pp.158-166
• /
• 2005

Even though post-processing methods based on projections onto convex sets (POCS) have shown good performance for blocking artifact reduction, it is infeasible to implement POCS for real-time practical applications. This paper proposes DCT domain post-processing method based on POCS. The proposed method shows very similar performance compared to the conventional POCS method, while it reduces tremendously the computational complexity. DCT domain POCS performs the lowpass filtering in the DCT domain, and it removes the inverse DCT and forward DCT modules. Through the investigation of lowpass filtering in the iterative POCS method, we define kth order lowpass filtering which is equivalent to the lowpass filtering in the kth iteration, and the corresponding kth order DCT domain POCS. Simulation results show that the kth order DCT domain POCS without iteration gives very similar performance compared to the conventional POCS with k iterations, while it requires much less computations. Hence the proposed DCT domain POCS method can be used efficiently in the practical post-processing applications with real-time constraints.

• The Korean Journal of Mycology
• /
• v.26 no.4 s.87
• /
• pp.487-495
• /
• 1998

The mycotoxins, $Aflatoxin\;B_1(B)$ and Ochratoxin A(A), were measured from the various mejus manufactured under the artificial or natural conditions by the indirect competitive ELISA; The various fungi isolated from the Korean traditional home (KTH) made meju collected were observed to produce each mycotoxin mentioned above in the toxin producing broth, but only few in the sterilized cereals of soybean under the artificial conditions. Thus, the isolated fungi were not found to produce both A and B toxins in the artificial conditions. Particularly, the any mycotoxin was not determined at the range of 0.01 to 100 ng per gm of the mejus made under the conditions of KTH widely collected in Korea. The mycotoxins produced by the meju-fermenting fungi were seemed or speculated to be degraded in KTH's mejus under the natural conditions. The species of Mucor involved in the initial stage of fermentation were discussed to be important in the fermentations of KTH mejus.

• Nuclear Engineering and Technology
• /
• v.56 no.3
• /
• pp.1052-1065
• /
• 2024

Advanced Pressurized Water Reactors (APWRs) and Boiling Water Reactors (BWRs) employ a suppression pool as a heat sink to prevent containment overpressure. Steam can be discharged into the pool through multi-hole spargers or blowdown pipes in both normal and accident conditions. Direct Contact Condensation (DCC) creates sources of momentum and heat. The competition between these two sources determines the development of thermal stratification or mixing of the pool. Thermal stratification is of safety concern as it reduces the cooling capability compared to a completely mixed pool condition. In this work we develop a scaling approach to prediction of the thermal stratification in a water pool induced by steam injection through spargers. Experimental data obtained from large-scale pool tests conducted in the PPOOLEX and PANDA facilities, as well as simulation results obtained using validated codes are used to develop the scaling. Two injection orientations, namely radial injection through multi-hole Sparger Head (SH) and vertical injection through Load Reduction Ring (LRR), are considered. We show that the erosion rate of the cold layer can be estimated using the Richardson number. In this work, scaling laws are proposed to estimate both the (i) transient erosion velocity and (ii) the stable position of the thermocline. These scaling laws are then implemented into a 1D model to simulate the thermal behavior of the pool during steam injection through the sparger.

• Communications of the Korean Institute of Information Scientists and Engineers
• /
• v.28 no.5
• /
• pp.27-31
• /
• 2010

• 대학교육
• /
• s.148
• /
• pp.125-125
• /
• 2007