• Tribology and Lubricants
• /
• v.26 no.4
• /
• pp.230-239
• /
• 2010

Mechanical face seal installed in boiler feedwater pump prevents leakage of working fluid using thin fluid film between stator and rotor. If the leakage of working fluid exceeds the allowable volume, serious malfunction of boiler feedwater pump will be happen. The thinner fluid film exists between stator and rotor, the less working fluid leaks out. However, if the thickness of fluid film is not enough, the wear of seal face will be increased. And it causes the decrease in life of mechanical face seal. Therefore appropriate design is necessary to maximize the performance and life of mechanical face seal. In this study, numerical analysis using finite volume method was conducted to investigate the static characteristics of wavy mechanical face seals which have 4 different wavy surface profiles on rotor. As a result, opening force, leakage volume of working fluid and friction torque were obtained. For the same minimum film thickness, the static characteristics of mechanical face seal were affected by the wavy surface profile which can change the thickness of working fluid film and pressure distribution.

• Microbiology and Biotechnology Letters
• /
• v.27 no.4
• /
• pp.304-310
• /
• 1999

We have developed a new process for the production of new structure oligosaccharides using the mixed-culture fementation of Lipomyces starkeyi KSM22 and leuconostoc mesenteroides B-512FMCM.L.starkeyi KSM22 produces a novel DXAMase(an enzyme containing both dextranase and amylase activities). It hydrolyzes the soluble starch and dextran. The hydrolyzates were used as acceptors for dextransucrase of L.mesenteroides to synthesize the new oligosaccharides(NOS). In fermentation, as the concentration of sucrose was increased from 9%(w/v) to 15%(w/v), the yields of dextran(sum of dextran I, MW=66kD, and dextran II, MW=21kD) was increased from 12.7% to 42.5%, and NOS was increased from 3.9% to 5.2% of the theoretical, respectively. The NOS of dp(degree of polymerization) 5 and over was increased from 33.1% to 58.3% of the total NOS. The NOS showed heat resistant up to 12$0^{\circ}C$ and was stable at pHs ranged from 2 to 6. The NOS decreased the pH changes in the culture of S. mutans, and also showed inhibitory effects on the growth of S. aureus or S. typhimurium.

• 월간 기계설비
• /
• no.8 s.205
• /
• pp.53-53
• /
• 2007

한국가스안전공사는 하반기부터 신 규격 PE배관은 4열 보조선(검정색) 표시 배관 사용을 원칙으로 하되, 4열 보조선이 없는 신 규격 PE배관을 사용할 경우 로케팅와이어를 따라 길이방향으로 100% 검정색 PE Tape를 1열로 부착할 것을 권고했다. 한국가스안전공사의 이같은 조치는 지난 2006년 12월 1일부터 PE배관 KS규격(KSM 3514)이 ISO규격을 인용한 신 KS규격으로 변경됨에 따라 신·구 규격 PE배관 상호 접합시 안전성 확보방안이 요구됨에 따른 것이다.

• Tribology and Lubricants
• /
• v.28 no.2
• /
• pp.70-80
• /
• 2012

Non-contact type mechanical face seals installed in mechanical systems prevent leakage of working fluid using thin working fluid film between stator and rotor. For that purpose, various kinds of surface profiles, grooves and conings have been applied on seal surfaces of stator and rotor to generate hydrodynamic and hydrostatic pressure. The thickness distribution of working fluid film is one of important factors which affect the working performances of mechanical face seal, and it is strongly affected by the surface height profiles of stator and rotor. Therefore, appropriate design of surface height profiles of stator and rotor is necessary to optimize the working performances and life of mechanical face seal. In this study, numerical analysis using finite volume method was conducted to estimate the working performances of wavy mechanical face seals which have 36 coning combinations. As results, minimum thickness of working fluid film, leakage volume of working fluid and friction torque in static equilibrium condition of mechanical face seal, and stiffness of working fluid film were obtained. The results show that the working performances of mechanical face seal were affected by the coning combinations which can change the thickness distribution of working fluid film and pressure distribution in sealing region of mechanical face seal.

• KSBB Journal
• /
• v.17 no.6
• /
• pp.586-589
• /
• 2002

Lipomyces starkeyi KSM 22 produces dextranase and amylase (DXAMase). The addition of 0.02％ (w/v) 2-deoxy-D-glucose or 0.5% (w/v) glycerol into a 1% (w/v) starch medium increased the final activity of DXAMase produced 2.5 fold or 2.4 fold, respectively, compared to that of a 1% (w/v) starch medium. This activity was similar to that produced with 1% (w/v) dextran. The stability of purified OXAMase at 40$\^{C}$ for 3 weeks was tested using the various enzyme stabilizers. With the addition of 25% (v/v) glycerol, 90.9% of initial activity was left after 3 weeks. For practical use, the addition of 1% (v/v) glycerol with 50 mM of CaCl$_2$ or KH$_2$PO$_4$was adequate and maintained 73.4% of the initial activity under the test conditions used.

• Analytical Science and Technology
• /
• v.21 no.2
• /
• pp.135-142
• /
• 2008

Plasticizer and heavy metals in domestic PVC wallpaper manufactured in Korea after 2005 were analyzed to identify the contained quantity in comparison with the 2002 manufactured PVC wallpapers. Plasticizer of wallpapers was analyzed by the method KSM1991 which uses soxhlet extraction with n-hexane and GC/FID. Heavy metals were pre-treated with 0.07 mol/L hydrochloric acid (HCl) and analyzed by ICP/OES according to the EN 71-part 3 method. DEHP, DINP, DEP, acetyl tributyl citrate were identified from wallpaper. Contents of DEHP, DINP were 0.2~11.3%, 17.9~27.8% respectively in 6 wallpapers, DEP and acetyl tributyl citrate were 1.5%, 8.9% respectively in one wallpaper. Plasticizers have changed from DEHP that has possibility of hazards to DINP, DEP and acetyl tributyl citrate as compared with 2002. Heavy metals were detected under guide line from all of the wallpapers except fire-retardant wallpaper contain antimony. While PVC wallpaper was improved by use of various plasticizer, functional wallpapers such as fire-resistant wallpaper contain high antimony in this study.

• Journal of Microbiology and Biotechnology
• /
• v.18 no.12
• /
• pp.1908-1914
• /
• 2008

An alkaliphilic bacterium, Bacillus clausii SKAL-16, was isolated from soil that had been contaminated with vegetable oil. The optimal pH and general pH range for bacterial growth was 8, and 7 to 10, respectively. The bacterium could grow on tributyrin and glycerol, but could not grow on acetate and butyrate. The SKAL-16 strain excreted butyric acid during growth on tributyrin, and selectively ingested glycerol during growth on a mixture of butyric acid and glycerol. The SKAL-16 generated intracellular lipase, but did not produce esterase and extracellular lipase. The DNA fragment amplified with the chromosomal DNA of SKAL-16 and primers designed on the basis of the esterase-coding gene of Bacillus clausii KSM-KI6 was not identical with the esterase-coding gene contained in the GenBank database. Pyruvate dehydrogenase, isocitrate dehydrogenase, and malate dehydrogenase activities were detected in the cell-free extract (crude enzyme).

• Journal of environmental and Sanitary engineering
• /
• v.16 no.1
• /
• pp.53-60
• /
• 2001

In this study, the heavy metals in tannery sludge were solidified by using cement and power plant fly ash. Solidification characteristics were discussed with the compressive strength and chromium leaching characteristics of solids. The compressive strength of cement mortar was increased by the amount of fly ash up to 24.3~33.8%, which was considered the results of pozzolanic reaction. When the content of fly ash was 20%, cement mortar showed the highest value $295kg/\textrm{cm}^2$ for 28 days curing. At early curing days, solidified chromium tannery sludge solids were showed lower compressive strength because of the retard on the hydration of cement, but the compressive strength was recovered to be more than $140kg/\textrm{cm}^2$ for 28 days curing regardless with the amounts of fly ash. Also, the results of leaching tests by KSM and TCLP method were showed that the solidified chromium sludge have leached out 0.3~2.2% and 11~17%, respectively.

• Journal of environmental and Sanitary engineering
• /
• v.13 no.3
• /
• pp.121-127
• /
• 1998

This study investigated exposures to oil mist obtained from an cutting oil manufacture shop and 5 machining shops and also analysis of some oils. The results were that geometric average concentrations of oil mist were $0.29 mg/m^3$, which was less than current $TLV(5mg/m^3$) in Korea. The proper case of either type of system will ensure that atmospheric concentrations of oil mist in machine shops will be within the TLV. It should be remembered, however, that this TLV was established before there was any suggestion that in the inhalable of oil mist might rarely be carcinogenic, and so it seems prudent to keep atmospheric content as low as possible. The analysis of insoluble cutting oils with GC-MSD showed that considerable suspected PAHs were contained. But soluble cutting oil(KSM-W2) didn't almost contain PAHs.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2021.05a
• /
• pp.49-50
• /
• 2021

광산 분야 등의 채굴을 위한 천공 과정에서 현재 진행 중인 천공 위치의 실시간 측정이 요구되는데 이를 위해 드릴 후면에 부착된 센서 정보를 로드 파이프를 통해 지상으로 전송할 수 있는 통신방식을 제안하였다. 드릴 후면에 장착된 센서에서 검출된 신호는 송신부에서 변조를 통해 로드 파이프로 전송하고, 수신부에서는 이에 대응되는 복조 과정을 통해 센서 데이터를 추출하였다. 제안된 방법의 검증을 위해 설계된 장치를 사용하여 실험을 수행하였으며, 실험 결과 제안된 방법에 의한 데이터 송수신이 정상적으로 동작함을 확인하였다.