• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.39 no.4
• /
• pp.45-52
• /
• 2007

Whole, bast and core fibers of kenaf cultivar Tainung-2 were pulped under different pulping methods, thermomechanical and kraft pulping methods. The physical and optical properties of kenaf TMP(thermomechanical pulp) and KP(kraft pulp) handsheets were investigated and the results from the study are summarized as follows: Yields of TMP and KP were $77{\sim}87%\;and\;43{\sim}52%$, respectively. There was no significant change in apparent density between kenaf KP and USKP(unbleached softwood kraft pulp) but TMP showed a little lower apparent density. Bast pulp had the lowest apparent density regardless of pulping methods. Tensile strength of kenaf KP was higher than that of TMP but similar to that of USKP. Both TMP and KP handsheets of bast fraction showed the highest tear strengths among whole, bast, and core fractions. Core fraction showed the lowest tear strengths under different pulping methods. In general burst strength of kenaf pulp under different pulping methods was lower than that of USKP, and kenaf pulp had better stiffness than USKP. Brightness of kenaf KP and TMP was higher than that of USKP. There was no significant variation in opacity between kenaf pulp and USKP even though kenaf pulp showed a little lower opacity. The main difference in paper quality between the core fiber and bast fiber is derived from the fact that bast fiber is long and thin, whereas core fiber is short and thick.

• The Korean Journal of Food And Nutrition
• /
• v.32 no.2
• /
• pp.106-113
• /
• 2019

The objective of this study was to evaluate the effect of fermented Kalopanax pictus (KP-F) on macrophage activation and its effect as a competitive inhibitor of LPS and inhibitory effect on endotoxemia. The results showed that KP-F could activate macrophage in a dose-dependent manner, and KP-F was confirmed to act as a ligand for TLR4. Also, it was found that KP-F did not exhibit the same biotoxicity as LPS in intraperitoneal injection, and that it could suppress the neutrophil migration induced by LPS administration. In normal mice, the body weight, tissue weight, and amount of nitrite and pro-inflammatory cytokines in serum showed no significant changes with KP-F diet for 2 weeks, confirming that administration of KP-F in normal mice did not lead to over activation of immune response and biotoxicity. In the mouse model of endotoxemia induced by LPS and D-galactosamine(D-GalN) in sub-lethal dose, the diet of KP-F effectively inhibited the amount of nitrite and cytokines in the blood, and thus was found to be able to relieve the hepatic and kidney injury. In addition, in the endotoxemia mouse model induced by LPS and D-GalN of lethal dose, the survival rate was increased by KP-F diet in a dose-dependent manner.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2004.10a
• /
• pp.245-251
• /
• 2004

This paper is studied on the effect of TiAlN coated Ball End Mill and MQL(Minimum Quantity Lubrication) cutting condition on cutting characteristic of high hardness steels. KP4 steels[HRC32] and STD11[HRC60] heat treated steels were used as the workpiece and WC-Co ball end mill and single and multi layer TiAlN coated ball end mill were utilized in the cutting tests. MQL device was used to spray botanical oil coolant. Result showed that TiAlN coated ball end mill were increased the cutting length than WC-Co ball end mill in the cutting speed[$245{\sim}320m/min$] about $2.3{\sim}5.7$ times for KP4 steels and about $2.5{\sim}4.3$ times far STD11 heat treated steels. The multi layer TiAlN coated ball end mill is good for KP4 steels than single layer coated.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2005.10a
• /
• pp.344-349
• /
• 2005

This paper is studied on the effect of TiAlN coated ball end mill on cutting characteristic of high hardness steels in dry cutting condition without coolant. KP4 steels[HRC32] and STD11[HRC60] heat treated steels wert: used as the workpiece and WC-Co ball end mill and single and multi layer TiAlN coated ball end mill were utilized. Results showed that TiAlN coated ball end mill were increased the cutting length than WC-Co ball end mill in the cutting speed$[245\~320m/min]$ about $2\~5$ times for KP4 steels and about $2.7\~4.3$ times for STD11 heat treated steels. The multi layer TiAlN coated ball end mill is good about $1.2\~1.7$ times for KP4 steels and STD11 steels than single layer coated.

• Proceedings of the PSK Conference
• /
• 2002.10a
• /
• pp.410.2-411
• /
• 2002

Ketoprofen (KP), a potent analgesic and non-steroidal anti-inflammatory drug, has some disadvantages such as gastro-intestinal irritation. short half-life (1.5-4 hour) in plasma and low solubility in aqueous solution. In order to minimize these disadvantages. we have recently prepared a KP prodrug, KP-polyethylene glycol conjugate (KPEG750, PEG Mw=750), and investigated its pharmacokinetic behavior. anti-inflammatory and analgesic effect. (omitted)

• Korean Journal of Applied Biomechanics
• /
• v.12 no.1
• /
• pp.63-87
• /
• 2002

The purpose of this study was to analyze the kinematic variables when Uchi-mata(inner thigh reaping throw) performing by Kumi-kata(engagement position, basic hold) types A, B(A: grasping part-behind neck lapel, B: chest lapel) in Judo with three dimensional analysis technique DLT method by videography. The subjects were four male judokas who have been training in Yong-In University(YIU), on Korean Representative level and Uchi-mata is their tokui-nage(favorite technique), the throwing form was filmed on two S-VHS 16mm video camera( 30frame/sec. Panasonic). Kinematic variables were temporal, posture, and COG. The data collection was performing by Uchi-mata. Six good trials were collected for each condition (type A, B) among over 10 trials. The mean values and the standard deviation for each variable were obtained and used as basic factors for examining characteristics of Uchi-mata by Kumi-kata types. The results of this analysis were as follows : 1) Temporal variables The total time elapsed(TE) by Uchi-mata of types A, B were 1.45, 1.56 sec. respectively. Types A shorter than B. 2) Posture variables In performing of Uchi-mata, the range of flexion in type A, left elbow was $45^{\circ}$ and B was $89^{\circ}$ from Event 2(E2) to Event 6(E6). Type A and B were quite different in right elbow angle in Event1(E1). Left shoulder angle of type A was extended and type B was flexed in E4. Both types right shoulder angles were showed similar pattern. Also both hip angles(right/left) were showed similar pattern. When type A performed Uchi-mata the knee-angle of supporting foot showed $142^{\circ}$in the 1st stage of kake phase[KP], and extended to $147^{\circ}$in the 2nd stage of KP. And the foot-ankle angle of supporting foot showed $83^{\circ}$in the 1st stage of KP, and extended to $86^{\circ}$in the 2nd stage of KP. moreover, The knee angle of attacking foot showed $126^{\circ}$in the 1st stage of KP, and extended to $132^{\circ}$in the 2nd stage of KP, and the foot-ankle angle of attacking foot showed $106^{\circ}$in the 1st stage of KP, and extended to $121^{\circ}$in the 2nd stage of KP. When type B performed Uchi-mata the knee-angle of supporting foot showed $144^{\circ}$in the 1st stage of KP, and extended to $154^{\circ}$in the 2nd stage of KP. And the foot-ankle angle of supporting foot showed $83^{\circ}$in the 1st stage of KP, and extended to $92^{\circ}$in the 2nd stage of KP. moreover, The knee angle of attacking foot showed $132^{\circ}$in the 1st stage of KP, and extended to $140^{\circ}$in the 2nd stage of KP, and the foot-ankle angle of attacking foot showed $103^{\circ}$in the 1st stage of KP, and extended to $115^{\circ}$in the 2nd stage of KP. During Uchi-mata performing, type A showed pulling pattern and type B showed lift-pulling pattern. As Kumi-kata types, it were different to upper body(elbow, shoulder angle), but mostly similar to lower body(hip, knee, ankle angle) on both types. 3) C. O. G. variables When the subjects performed Uchi-mata, COG of type A, B up and down in vertical aspect was 71cm, 73.8cm in height from the foot in the 2nd stage of KP. As Kumi-kata types, it were different on medial-lateral direction aspect but weren't different in Kuzushi phase on vertical direction aspect.

• Journal of Embryo Transfer
• /
• v.15 no.1
• /
• pp.33-38
• /
• 2000

This study was undertaken in an effort to select the sire bull in Hanwoo through in vitro fertilization of proven bull semen. It was used for in vitro fertilization that of the 20 proven bull semen with follicular oocytes derived from slaughterhouse ovaries of Hanwoo. The stage of maturation on the time course of bovine cumulus-enclosed oocytes incubated for 24 hours was found the highest(96.4%) than hose of other maturationi time. In vitro fertilization rate of bovine oocytes with proven bull sperm showed from 61.5 to 88.9%. Polyspermy of in vitro fertilized oocytes according to proven bulls were the highest KP 491(61.5%) nothing but KP 486, KP 491 and KP 497.

• The Korean Journal of Zoology
• /
• v.34 no.4
• /
• pp.469-478
• /
• 1991

The CALLA on the surface of leukemic cell lines, recognized by our monoclonal antibody. KP-22(IgG1, K) was one of cell surface glycoproteins having moi. wt. of approximately 100,000 dalton, and could be shed in spent medium or endocytosed when binding the cognate antidoby, KP-22. In the presence of cognate antibodies, 60% of CALLAS recogniEed by KP-22 MAs were modulated and cleared from the cell surface during 24 hrs, and approximaetely 35% of them was endocytosed and 25%, was shed in spent medium. The reappearance of the membrane CALLA after modulation by the KP-22 required at least 6 hours and supposed to be newly synthesized molecules.

• Journal of Microbiology and Biotechnology
• /
• v.30 no.2
• /
• pp.271-278
• /
• 2020

Glycerol dehydrogenase (GlyDH) catalyzes the oxidation of glycerol to dihydroxyacetone (DHA), which is the first step in the glycerol metabolism pathway. GlyDH has attracted great interest for its potential industrial applications, since DHA is a precursor for the synthesis of many commercially valuable chemicals and various drugs. In this study, GlyDH from Klebsiella pneumoniae (KpGlyDH) was overexpressed in E. coli and purified to homogeneity for biochemical and molecular characterization. KpGlyDH exhibits an exclusive preference for NAD⁺ over NADP⁺. The enzymatic activity of KpGlyDH is maximal at pH 8.6 and pH 10.0. Of the three common polyol substrates, KpGlyDH showed the highest k_cat/K_m value for glycerol, which is three times higher than for racemic 2,3-butanediol and 32 times higher than for ethylene glycol. The k_cat value for glycerol oxidation is notably high at 87.1 ± 11.3 sec^-1. KpGlyDH was shown to exist in an equilibrium between two different oligomeric states, octamer and hexadecamer, by size-exclusion chromatography analysis. KpGlyDH is structurally thermostable, with a T_m of 83.4℃, in thermal denaturation experiment using circular dichroism spectroscopy. The biochemical and biophysical characteristics of KpGlyDH revealed in this study should provide the basis for future research on its glycerol metabolism and possible use in industrial applications.

• Journal of the Korea Society of Computer and Information
• /
• v.27 no.4
• /
• pp.53-60
• /
• 2022

Recently, as the amount of data collected by drones has rapidly increased, it is necessary to support cloud computing technology that can securely and efficiently store and process data. However, various security threats such as stealing, leaking, or tampering with data communicated by drones can occur due to attackers. Therefore, there is a need for security technology to provide secure communication of data collected from drones. Among various security technologies, the KP-ABE scheme, which is attribute-based encryption, is a security technology that satisfies two characteristics: data encryption and user access control. This paper researched the KP-ABE scheme and proposed a secure data access control scheme to the drone environment. This proposed scheme provides confidentiality and integrity of data communicated in a drone environment and secure access control and availability. In addition, it provides a fast ciphertext search and constant size ciphertext among the requirements to be provided in the KP-ABE scheme.