• Journal of the Korean Society of Safety
• /
• v.35 no.2
• /
• pp.8-16
• /
• 2020

In Article 311 of the Regulation on Occupational Safety and Health Standards requires the use of Korean Industrial Standards Act in accordance with the Industrial Standardization Act. However, the classification, inspection, maintenance, design, selection, and installation of explosion hazard locations for explosion and explosion prevention and internalization of 'safety' in the performance maintenance phase of electrical machinery and equipment There is no technical and institutional management plan for remodeling and alteration. Analysis of actual conditions and problems related to the installation, use, and maintenance of explosion-proof equipment, comparative analysis of domestic and international technical standards and systems, technical, institutional and administrative systems and systems related to installation, use, and maintenance of explosion-proof equipment, technical personnel and qualifications, etc. It is to propose legislation, system improvement, and technical standard establishment related to the maintenance of explosion-proof facility performance through improvement of the necessity and feasibility study for establishment of the legal status of the management site and management plan. As technical measures, KS standard revision (draft), KOSHA guide (draft) and explosion-proof facility performance maintenance manual were presented. In addition, the institutional management plan proposed the revised rule on occupational safety and health standards, the revised rule on the restriction of employment of hazardous work, and the manpower training program related to the maintenance of explosion-proof facilities and the qualification plan. Enhance safety at the installation, use, and maintenance stage of explosion-proof structured electrical machinery. It is expected to be used to classify explosion hazards, select related equipment, and to update and standardize standards related to installation, use and maintenance.

• Journal of muscle and joint health
• /
• v.24 no.3
• /
• pp.159-170
• /
• 2017

Purpose: The purposes of this study were to identify musculoskeletal symptoms and to investigate factors associated with musculoskeletal symptoms in small and medium sized hospital nurses. Methods: The data were collected from 206 nurses working in Jeonnam. We used self administration questionnaires of KOSHA GUIDE H-9-2012 for musculoskeletal symptoms, PWI-SF for psychosocial stress, KOSS for job stress, and HPLP-II for health behaviors. The collected data were analyzed using the $x^2$, t-test, and logistic regression analysis in SPSS Ver. 23.0. Results: Sixty-six percent of the subjects had musculoskeletal symptoms. The shoulder had the highest symptom at 38.3%, followed by lower back at 32.5%, and neck at 29.1%. The mean and standard deviation score of psychosocial stress were $24.06{\pm}6.01$, those of job stress were $2.38{\pm}0.23$, and those of health behaviors were $2.14{\pm}0.39$. The items that were significantly different according to musculoskeletal symptoms were career ($x^2=6.67$, p<.036), one week overtime ($x^2=7.27$, p<.026), subjective health status ($x^2=4.29$, p<.038), and psychosocial stress ($x^2=7.99$, p<.010). In logistic regression analysis, career, and psychosocial stress were found to affect musculoskeltal symptoms. Conclusion: It is necessary to conduct preventive intervention to reduce musculoskeletal symptoms according to career and psychosocial stress for small and medium sized hospital nurses.

• Research in Community and Public Health Nursing
• /
• v.24 no.3
• /
• pp.314-322
• /
• 2013

Purpose: The purpose of the study was to examine associations between job stress and work-related musculoskeletal symptoms (WRMS) in street sanitation workers. Methods: A cross-sectional correlational study was conducted with 87 male street sanitation workers at E Gu in Seoul. The Job stress and WRMS were measured by using the Korean Occupational Stress Scale-Short Form and the KOSHA GUIDE H-9-2012 instrument, respectively. The WRMS was evaluated according to the National Institute of Occupational Safety and Health criteria. Results: The participants reported greater levels of insufficient job control and interpersonal conflict than the general Korean population. Of the participants, 44.8% reported WRMS at any body parts. Specifically, 28.7% reported WRMS at upper parts, while 16.5% reported WRMS at lower parts. Compared to low levels of job demand, its high levels were significantly associated with WRMS at both upper and lower parts of the body (OR=3.62, 95% CI=1.15~11.38; OR=3.60, 95% CI=1.04~12.39). Compared to low levels of occupational climate, its high levels were significantly associated with WRMS at upper parts of the body (OR=3.18, 95% CI=1.22~8.26). Conclusion: Among street sanitation workers, job stress may be a correlate of WRMS. Therefore, nursing strategies for reducing job stress are needed to prevent and manage WRMS.

• Korean Journal of Occupational Health Nursing
• /
• v.23 no.4
• /
• pp.245-253
• /
• 2014

Purpose: School foodservice employees (SFEs) could be exposed to the risk of musculoskeletal disease and of job stress due to their job characteristics. This study was to evaluate the level of job stress and the prevalence of work-related musculoskeletal symptoms (WRMS) in Seoul city's SFEs, and to determine associations between job stress and WRMS. Methods: The study design was cross-sectional, and 975 SFEs were recruited. Self-administered questionnaire included the 'Korean occupational stress scale-short form' and the 'KOSHA GUIDE H-9-2012' instrument to evaluate the job stress and WRMS, respectively. SFEs' medians of job stress were compared to the reference values of published study in Korean workers. Results: The participants reported greater levels of job demand and physical environment than the general Korean population. WRMS were reported in 89.0% of participants at any body part, and 41.1% were presumed to need for medical intervention. High levels of job demand and of physical environment were significantly associated with WRMS. Conclusion: Subscales of job demand and physical environment were relatively high in SFEs and those were related to the occurrence of WRMS. To reduce the WRMS prevalence, a job stress management program focused on job demand and physical environment may be required.

• Journal of the Korean Society of Safety
• /
• v.32 no.5
• /
• pp.168-178
• /
• 2017

In order to prevent major and chemical accidents, some of the plants which would like to install and operate hazard chemicals handling facilities must submit Off-site Consequence Analysis due to recent arisen leak accidents since 2015. A lot of chemical industrials choose gas detectors as mitigation equipment to early detect gas vapor. The way of placement of gas detectors has two methods; Code-based Design(CBD) and Performance-based Design. The CBD has principles for gas detectors to be installed with consideration for the place that is expected to accumulate gas, and the leak locations according to legal standards and technical guidelines, and has a possibility to be unable to detect by these rules to locate gas detectors by vapor density information. The PBD has two methods; a Geographic Method and Scenario based Method. The Scenario-based Method has been suggested to make up for the Geographic Coverage Method. This Scenario-based Method draw the best optimum placement of gas detectors by considering leak locations, leak speed information, leak directions and etc. However, the domestic placement guidelines just refers to the CBD. Therefore, this study is to compare existing placement location of gas detectors by the domestic CBD with placement locations, coverages and the number of gas detectors in accordance with the Scenario-based Method. Also this study has measures for early detecting interest of Vapor Cloud and suitable placement of gas detectors to prevent chemical accidents. The Phast software was selected to simulate vapor cloud dispersion to predict the consequence. There are two cases; an accident hole size of leak(8 mm) from API which is the highst accident hole size less than 24.5 mm, and a normal leak hole size from KOSHA Guide (1.8 mm). Detect3D was also selected to locate gas detectors efficiently and compare CBD results and PBD results. Currently, domestic methods of gas detectors do not consider any risk, but just depend on domestic code methods which lead to placement of gas detectors not to make personnels recognize tolerable or intolerable risks. The results of the Scenario-based Method, however, analyze the leak estimated range by simulating leak dispersion, and then it is able to tell tolerable risks. Thus it is considered that individuals will be able to place gas detectors reasonably by making objectives and roles flexibly according to situations in a specific plant.

• Journal of the Ergonomics Society of Korea
• /
• v.30 no.5
• /
• pp.637-644
• /
• 2011

Objective & Background: When applying various evaluation tools that analyze work posture risk through observation, accurate measurement of body flexion angle is very important. Method: This study investigated differences and appropriateness of 5 different existing reference points commonly used in the analysis of the work posture. Twenty five ergonomist and trained professionals were participated in this study. A Same flexion angle was utilized for the evaluation of risk assessment of musculoskeletal disorders using five different reference points to investigate the degree of difference between them. To investigate how different the observers' preferred flexion angle measuring methods were compared to the ISO 11226 Reference Posture, a virtual body model was constructed using the Poser 6.0 program. Six types of body flexion postures were constructed, and since neck flexion differs according to body angle, five types of neck flexion postures were constructed with the trunk bending $20^{\circ}$ forward, making up a total of 30 virtual flexion postures. Results: Results showed that the observers used personally preferred reference points instead of reference points recommend in the evaluation tools. Also the results revealed the their seems to be 6 types of flexion angle for the trunk and 11 types of measurement methods for the neck flexion angle in the form of personally preferred reference points. The results showed that a mean difference of $14^{\circ}$($4{\sim}23^{\circ}$) occurred in the trunk, and a mean difference of $20^{\circ}$($-8{\sim}51^{\circ}$) occurred in the neck. To increase accuracy when using the 5 evaluation tools in combination, the ISO 11226 standards, observers' preferred flexion posture standards, and common flexion posture standards of the evaluation tools were compared with the reference points of the 5 evaluation tools. Results showed considerable variance in angle difference for each evaluation tool. Conclusion: According to the results of this study, considering the angle difference between the flexion angle reference points of the evaluation tool and the reference points selected by the observers, it is concluded that instead of personally preferred reference points, the standardized reference points to enhance the accuracy and the objectivity. Application: The result of this study can be used as reference guide to develop the standardized reference point in the future.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.31 no.1
• /
• pp.83-93
• /
• 2021

Objectives: 'Confined space' was only defined in the Safety and Health Regulations as a place where oxygen deficiency and hydrogen sulfide must be dealt with at the time of the initial enactment (1982). The danger of fire and explosion were added in 2003. We will compare and review the regulations related to confined space work under the current safety and health rules alongside regulations in other countries and prepare a plan to improve the system through enhanced clarity and execution. Methods: In a comparison of systems for the prevention of suffocation in confined spaces in major countries (Germany, United States, Japan) different concepts of the definition of confined spaces in different countries apparently due to differences in each country's legal implementation system, accident analysis methods, the status of safety and health implementation in workplaces, the precautions against actual confined space work, and the definition of confined spaces were found to be not much different between Korea and the other foreign countries. Results: In the case of Germany and the United States, a confined space is defined as a contextual concept rather than a place, so more careful attention is needed from operators or enclosed space managers as it is often necessary to judge the actual workplace. In the case of Korea and Japan, the interior of the place is mainly defined as a place, especially in the case of Japan, which concentrates on oxygen deficiency and hydrogen sulfide poisoning. Conclusions: For measures to improve regulations on the prevention of suffocation accidents in Korea, I would like to propose three major measures to improve the system in the rules on domestic industrial safety and health standards. It is necessary to prepare and provide a guide to ensure that the 18 types of confined spaces currently defined as confined spaces are clearly understood by field management supervisors or workers.