• Journal of the Korean Ceramic Society
• /
• v.32 no.3
• /
• pp.341-348
• /
• 1995

An analysis of the use of temperature profiles in the determination of the kinetic parameters of combustion synthesis of Ti5Si3 were investigated. From profile analysis, an apparent activation energy of 12KJ/mol was calculated. The Maximum heating rate achieved during 10wt% Ti5Si3 reaction by the product dilution method was approximately $1.5\times$104 K/s. Coupling this value with the measured wave velocity of 7.02 cm/s yields a maximum thermal gradient of 2.14$\times$103 K/cm. The value of tr (=t*) was calculated to be 1.2$\times$10-1 s and the value of td (=tx) was calculated to be 32.89 s. Using the definition of t* and the measured wave velocity, the effective thermal diffusivity, $\alpha$, was calculated to be 0.59$\times$10 $\textrm{cm}^2$/s. From these analysis, the power function, G, was also calculated.

• Journal of Microbiology and Biotechnology
• /
• v.10 no.6
• /
• pp.805-810
• /
• 2000

An antifungal protein antagonistic to the rice blast fungus, Pyricularia oryzae was purified from Paenibacillus macerans PM-1 by ammonium sulfate fractionation, Q Sepharose Fast Flow column chromatography, Phenyl Sepharose CL-4B column chromatography and Superose 12 gen filtration. An apparent molecular mass of the purified antifungal protein was determined as 8 kDa by SDS-PAGE and 9 kDa by analytical gel filtration, respectively, suggesting that the purified protein is a monomer. The antifungal protein was stable at pH range from 7-12 and up to $100^{\circ}C$. The protein was also stable at 0.1-1% Tween 20 and Triton X-100. The N-terminal amino acid sequence of the antifungal protein was Thr-Glu-Leu-Pro-Leu-Gly-Ile-Val-Met-Asp-Lys-Tyr-Thr-Asp-Ala-Phe-Lys-Phe-Asp-Met-Phe. Comparison of the determined sequence with other peptide and DNA sequences did not reveal homology at all. Therefore, the purified antifungal protein was speculated to be a novel protein. The condidial germination in vitro of P. oryzae KJ301:93-39 by the purified protein ($5.9{\mu} g/ml$) was limited to $9{\pm}3.2%$ only, compared with $69{\pm}2.4%$ of the control. Ungerminated conidia were swollen at basa and mid cell by the purified protein. In vivo bioassay for inhibition of conidial germination of P. oryzae KJ 301, one of the most predominating racesin Korea. the purified protein ($5.9{\mu} g/ml$)strongly inhibited the conidial germination. The conidia, even though germinated, could not develop any further to produce appressoria efficiently.

• Parasites, Hosts and Diseases
• /
• v.56 no.4
• /
• pp.359-364
• /
• 2018

The taxonomy of Spirometra species has been controversial despite the medical and veterinary importance. Currently, only a few Spirometra species are considered valid species in the genus Spirometra. In the present study, the distribution of Spirometra species obtained from animals in Korea were identified by molecular analysis of the mitochondrial cytochrome c oxidase I (cox1) gene. A total of 28 Spirometra species specimens were analyzed. These were all collected between 1973 and 2008 in the Republic of Korea. Mitochondrial cox1 sequences were examined for a total of 28 specimens comprising 14 S. decipiens and 14 S. ranarum. The difference in partial cox1 sequences (316 bp) between S. erinaceieuropaei (KJ599680) and S. ranarum (this study) was 9.3%, while that between S. decipiens (KJ599679) and S. ranarum (this study) was 2.2%. Genetic analyses identified 2 Spirometra species in animals such as cat, leopard cat, dog, duck and snake in Korea as S. decipiens and S. ranarum. S. decipiens and S. ranarum were present in Gyeongnam Province (P), Jeonnam P, Gangwon P, Chungbuk P, and Seoul. S. decipiens was found in tadpoles, snakes, ducks, cats, leopard cats and dogs, while S. ranarum was found in cats and dogs. The ratio of S. decipiens:S. ranarum calculated from the molecular data was 14:14 (or 1:1). These results indicate that S. decipiens and S. ranarum are sympatrically distributed in Korea.

• 한국생물공학회:학술대회논문집
• /
• 2002.04a
• /
• pp.131-135
• /
• 2002

Acetobacter xylinum KJ1 efficiently producing bacterial cellulose(BC) in shaking culture was isolated from a rotten grape. The strain was used to investigate optimum operating conditions for increasing BC production and factorial design model was employed for the optimization. The results of experiments were statistically analyzed by SAS program. Reciprocal effects of each factors(carbon source concentration, shaking speeds(rpm), oxygen pressure, and CSL concentration) and culture condition of BC production were examined by getting regression equation of the dependent variable. Comparisons between experimental results and predicted results about BC concentration were done in total 24 experiments by combination of each factors using SAS program, and the correlation coefficients of BC concentration and BC yield were 0.91 and 0.81, respectively. The agitated cultures were performed in various operation conditions of factors which affected considerably to BC production in jar fermentor. The results showed that BC concentration was 11.67g/ L in 80 hours cultivation under the condition of carbon source concentration shaking speeds(rpm) : oxygen pressure: CSL concentration = 4% : 460rpm : 0.28 : 6%. On the other hand BC yield was 0.42g/g in 80 hours cultivation under the condition of carbon source concentration shaking speeds(rpm) : oxygen pressure: CSL concentration = 4% : 564rpm : 0.21 : 2%. The BC production could be enhanced up to more than 65.3% by factorial design. The result of a verifying experiment under the optimal conditions determined by the factorial design to the BC production showed that the model was appropriate by obtaining BC concentration of 11.02g/L in the optimum condition

• Journal of the Korean Society for Heat Treatment
• /
• v.17 no.1
• /
• pp.23-28
• /
• 2004

In this work, the effect of Sc and Mm(misch metal) on the high temperature behavior of Al-Mg alloys was observed. Hardness was increased due to appearance of fine $Al_3Sc$ precipitates. The elongation of Al-Mg-Sc alloy at high temperature was higher than that of Al-Mg-Sc-Mm alloy because Al-Mg-Sc alloy has finer grain sizes than Al-Mg-Sc-Mm alloy. The strain rate sensitivity factor, "m" of Al-Mg-Sc and Al-Mg-Sc-Mm at $475^{\circ}C$ and $1{\times}10^{-2}s^{-1}$ were 0.33 and 0.46, respectively. The activation energy of Al-Mg-Sc and Al-Mg-Sc-Mm alloy for superplastic deformation was 133KJ/mol and 103KJ/mol respectively. The elongation of Al-Mg-Sc alloy at high temperature was decreased by the addition of Mm, but the strength at high temperatures and low strain rate was improved.

• Parasites, Hosts and Diseases
• /
• v.57 no.1
• /
• pp.55-60
• /
• 2019

This study was undertaken to determine the complete mitochondrial DNA sequence and structure of the mitochondrial genome of Spirometra ranarum, and to compare it with those of S. erinaceieuropaei and S. decipiens. The aim of this study was to provide information of the species level taxonomy of Spirometra spp. using the mitochondrial genomes of 3 Spirometra tapeworms. The S. ranarum isolate originated from Myanmar. The mitochondrial genome sequence of S. ranarum was compared with that of S. erinaceieuropaei (GenBank no. KJ599680) and S. decipiens (GenBank no. KJ599679). The complete mtDNA sequence of S. ranarum comprised 13,644 bp. The S. ranarum mt genome contained 36 genes comprising 12 protein-coding genes, 22 tRNAs and 2 rRNAs. The mt genome lacked the atp8 gene, as found for other cestodes. All genes in the S. ranarum mitochondrial genome are transcribed in the same direction and arranged in the same relative position with respect to gene loci as found for S. erinaceieuropaei and S. decipiens mt genomes. The overall nucleotide sequence divergence of 12 protein-coding genes between S. ranarum and S. decipiens differed by 1.5%, and 100% sequence similarity was found in the cox2 and nad6 genes, while the DNA sequence divergence of the cox1, nad1, and nad4 genes of S. ranarum and S. decipiens was 2.2%, 2.1%, and 2.6%, respectively.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2000.02a
• /
• pp.157-157
• /
• 2000

The adsorption processes of methyl chloride on Si(100)-2$\times$1 have been studied by low energy electron diffraction (LEED), Auger electron spectroscopy (AES) and semiempirical PM3 calculations. The dissociative adsorption of the methyl chloride on Si(100) takes place without breaking of the silicon dimer with high efficiency. For adsorption at the room temperature, the existence of a precursor state is confirmed by the behavior of the sticking probability depending on the coverage and temperature. From AES measurements, the determined activation barrier of adsorption ($\Delta$ Hads) is -28.4 kj/mol. This results indicate that the dissociative process is nonactivated. The optimized precursor state of CH3Cl on the Si(100)-2$\times$1 surface was determined by PM3 calculations based on a cluster model.

• Economic and Environmental Geology
• /
• v.43 no.4
• /
• pp.333-341
• /
• 2010

Fluvial sediments are widely distributed in present and old river-beds of the mid-Keum River, the tributaries of which are the Yugu and Jeongan Rivers. The basement of the mid-Keum River area consists of Mesozoic granites which are easily eroded compared to Precambrian gneisses, which are exposed in the upper-Keum River area. The provenance of the fluvial sediments includes both the Precambrian gneisses and Mesozoic granites, which occur in the catchment of the mid-Keum River. The coarse-grained sediments were probably transported from the river-beds and the overbank floodings of the main Keum River and its tributaries when the climate was warm and wet. The oldest mud deposits were dated at ca. 9,400 yr BP by the radiocarbon method. It has been estimated that the sand deposits below the dated muds were formed in a period from the Late Pleistocene to the Early Holocene. However we have revealed that the major part of the present river-bed sediments was formed at ca. 3,000-6,000 yr BP, i.e., in the mid- to late Holocene, when summer monsoon was very strong due to climatic changes. We have calculated fluvial sedimentation rates of 0.12-0.16 cm/yr and 0.02-0.09 cm/yr for borehole KJ-29 river-bed sediments and borehole KJ-28 floodplain deposits, respectively. We conclude that the sedimentation rate is higher near the present stream channel than near the floodplain.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.20 no.1
• /
• pp.49-59
• /
• 1984

Optimizing investigation of characteristics of underwater welding by a gravity type arc welding process was experimentally carried out by using six types of domestic coated welding electrodes for welding of domestic marine structural steel plates (KR Grade A-1, SWS41A, SWS41B,) in order to develop the underwater welding techniques in practical use. Main results obtained are summarized as follows: 1. The absorption speed of the coating of domestic coated lime titania type welding-electrode became constant at about 60 minutes in water and it was about 0.18%/min during initial 8 minutes of absorption time. 2. Thus, the immediate welding electrode could be used in underwater welding for such a short time in comparison with the joint strength of in-atmosphere-and on-water-welding by dry-, wet-or immediate-welding-electrode. 3. By bead appearance and X-ray inspection, ilmenite, limetitania and high titanium oxide types of electrodes were found better for underwater-welding of 10 mm KR Grade A-1 steel plates, while proper welding angle, current and electrode diameter were 6$0^{\circ}C$, above 160A and 4mm respectively under 28cm/min of welding speed. 4. The weld metal tensile strength or proof stress of underwater-welded-joints has a quadratic relationship with the heat input, and the optimal heat input zone is about 13 to 15KJ/cm for 10mm SWS41A steel plates, resulting from consideration upon both joint efficiency of above-100% and recovery of impact strength and strain. Meanwhile, the optimal heat input zone resulting from tension-tension fatigue limit above the base metal's of SWS41A plates is 16 to 19KJ/cm. Reliability of all the empirical equations reveals 95% confidence level. 6. The microstructure of the underwater welds of SES41A welded in such a zone has no weld defects such as hydrogen brittleness with supreme high hardness, since the HAZ-bond boundary area adjacent to both surface and base metal has only Hv400 max with the microstructure of fine martensite, bainite, pearlite and small amount of ferrite.

• Journal of Korean Society of Forest Science
• /
• v.85 no.2
• /
• pp.329-339
• /
• 1996

This study is to investigate the effect of mycorrhizal development, growth, nutrient absorption of P. thunbergii seedlings inoculated with Pisolithus tinctorius(Pt. KJ-1) in relation to toxic materials in soil. The concentrations on copper solution applied to the soils were 0, 40, 120, 260, 430ppm. The results are summarized as follows : 1. The germination of P. thunbergii with Pt. increased greater than without ectomycorrhizal fungi. Mycorrhizal development showed a significant decreasing trend at high concentration, and tolerant Cu test with Pt. in agar plate media showed a decreasing trend at a high level. 2. P. thunbergii seedlings inoculated with Pt. showed that the shoot length was significantly promoted at 40, 120ppm copper levels, and that of noninoculated seedlings had the lowest effect in 430ppm copper level. 3. The outer shape of ectomycorrhizal root tips after inoculating Pt. on P. thunbergii seedlings appeared as a monopodial type, a fern-like type, and a cluster-like type at 0ppm, 40ppm levels, but only monopodial type came out at 260ppm, 430ppm copper levels. 4. Root length, no. of juvenile leaves, total length of juvenile leaves, total dry weight, no. of needles and total length of needles of P. thunbergii with Pt. increased greater than those of noninoculated seedling. Growth response of P. thunbergii seedling inoculated with Pt. increased significantly at 40ppm, 120ppm Cu levels. 5. As a result of analysis of growth medium, pH, Na, CEC increased at higher Cu level, and total nitrogen, organic matters, available phosphorous, K, Ca and Mg decreased at 40ppm, 120ppm Cu levels. As a result of an analysis about a copper within soils, it appeared having high Cu-concentration at 0ppm level of an inoculated Pt. and high Cu-concentration in noninoculated Pt. than in inoculated Pt. at higher level. 6. As a result of an analysis of shoot, N, P, and K-concentration were higher in noninoculated seedlings than in inoculated seedlings, and Cu-concentration was higher in inoculated seedlings than in noninoculated seedlings. The analysis of root resulted in a high N-concentration at 40ppm, 120ppm levels, in a high P-concentration in inoculated seedlings and in a high Cu-concentration in noninoculated seedlings. Cu-concentration was significantly higher at root than at shoot.