• 한국의류학회지
• /
• 제21권6호
• /
• pp.1041-1050
• /
• 1997

This study was carried out to improve the thermal insulation properties of wool and wool- like fabrics by treating the fabrics with polyethylene glycol, to evaluate the fabric hand of PEG treated wool and wool-like fabrics and to grade up the fabric hand of the treated fabrics by treating with softening agents. Wool and wool-like fabrics were treated with high molecular PEG-8,000 by PDC. The thermal release/storage properties were measured on a DSC. Hand of specimens were evaluated by KES-FB system. The results were as follows; 1. PEG-treated fabrics showed thermal storage and thermal release properties by DSC and the heat contents were generally proportional to the add-ons. 2. PEG-treated fabrics showed higher Koshi and lower Numeri and Sofutosa values due to lower tensile energy and recovery and higher bending rigidity and shear stiffness as the add- ons increased. 3. PEG-treated fabrics showed much lower bending rigidity after softening agents treatment.

• 한국염색가공학회:학술대회논문집
• /
• 한국염색가공학회 2008년도 제38차 학술발표대회
• /
• pp.150-152
• /
• 2008

사회가 발달하여 감성사회로 접어들면서, 섬유산업도 새로운 감성소재를 개발하기 위한 연구를 추구하고 있다. 이러한 분야의 연구수단으로 생체모방(Biomimetics)을 활용하는 연구개발이 활발히 진행되고 있는데, 이중 미래지향적인 차세대 섬유로 Morphotex(R)를 이용한 Morpho 직물이 있다. 감성소재분야에서 '구조발색섬유'라고 불리어지는 독특한 색미를 가진 섬유소재인 Morphotex$^{(R)}$는 남미의 MORPHO 나비 날개의 구조적 발색원리를 모방하여 만든 광발색섬유로 염료와 안료를 사용하지 않는 친환경섬유이면서 고기능성과 쾌적성을 겸비한 소재로 요즘 많은 각광을 받고 있다. 본 연구에서는 구조발색 소재를 이용하여 제직한 감성의류소재 직물의 감량조건에 따른 감성특성을 비교.분석해보았다. 먼저 구조발색 소재로 제직 된 직물의 감량공정특성에 따른 구조발색 소재 직물의 인장 인열 특성을 분석하였으며 또한 KES-FB system으로 구조발색 소재 직물의 역학특성을 측정하고 측정한 역학특성으로부터 감성태를 평가해 보았다.

• 한국생활과학회지
• /
• 제8권1호
• /
• pp.125-134
• /
• 1999

The purpose of this study was to investigate the effects of heat transfer characteristics of fibers on the Qmax of insulating nonwovens. The effects of fiber type, moisture content, washing cycles on the Qmax were observed. The correlations between Qmax measured by KES-F7 system and subjective warm/cool touch perception test was analyzed. The results obtained were as followed: 1. Heat transfer characteristics of fibers effected on the Qmax of insulating nonwovens. 2. Moisture transport properties of fibers effected considerably on the Qmax of nonwovens and the increasing rate of Qmax by increasing moisture content was much higher at wool than polyester. 3. As a result of subjective perception test, subjective warm/cool touch and wettness of wool nonwoven was increased obviously by increasing moisture content. 4. At the same moisture content, wool nonwoven showed higher subjective cool touch and wetness than polyester. 5. In the physical properties of nonwovens, thickness was the most effective factor on the Qmax of insulating nonwovens.

• 한국염색가공학회지
• /
• 제14권1호
• /
• pp.58-65
• /
• 2002

This study surveys the physical properties of Solo-spun fabrics related to the characteristics of Solo-spun yarns, which were described in previous reports. For this purposes, 6 kinds of fabrics were woven on the pilot loom. 3 kinds of Solo-spun yarns with the 3 level of twist mutiplier of Nm 1/30 and 3 kinds of conventional ring-spun yarns with the same levels of twist multipliers of the same yarn counts. The fabrics were of 2/2 twill and clear-cut finished. The physical properties were surveyed by means of KES-FB system. Solo-spun fabrics seemed to be stiffer than ring spun fabrics as showing the lower extensibility with higher tensile energy, the higher bending rigidity, and the higher shear rigidity. Solo-spun fabrics showed the lower value in surface friction coefficient and surface roughness. For fabric abrasion tests, Solo-spun fabrics showed the higher pill resistance.

• 한국염색가공학회지
• /
• 제6권4호
• /
• pp.54-61
• /
• 1994

The study has been conducted to investigate the relationship between yarn structural parameters such as diameter, twist multiplier and linear density, and mechanical properties of yarns measured by KES-F System. Each mechanical characteristic values per tex have non-linear relationship to the increment of yarn diameter, but as the linear density has increased, the mechanical characteristic values except for the bending characteristics have decreased linearly. It is, however, difficult to analyze obviously on the effects of twist multiplier even though the bending and the shear characteristic values were inclined to decrease. The effect of dyeing has also considered. The results are showing that yarn-dyed samples had higher effects than top-dyed ones on the mechanical characteristics.

• 한국염색가공학회지
• /
• 제16권4호
• /
• pp.26-35
• /
• 2004

This study surveys the tension differences between Korean domestic and foreign looms and analyses fabric mechanical properties due to warp and weft tension differences using KES-FB system. Paper is divided by two parts. In this 1st paper, fabric is designed as 5 harness satin weave using 75d/36f warp and 100d/192f weft polyester filaments, and is woven by $Omega^\circledR$ rapier loom by Textec Co.Ltd and Picanol$-GTX^\circledR$ rapier loom by Picanol Co.Ltd respectively. These grey fabrics are processed on the same dyeing and finishing processes. Weavability is also analysed by measuring warp tension variation according to the warp position, the relationship between shed amount and the warp tension on one fixed heald frame is surveyed, and the relationship between end breaks and warp and weft tensions is also discussed.

• 한국염색가공학회지
• /
• 제21권3호
• /
• pp.43-48
• /
• 2009

This paper surveys the mechanical properties of nylon high tenacity coarse yarn and fabric for military and technical textiles. For this purpose, 6 kinds of yarns and 2 kinds of fabrics are prepared. The yarn physical properties such as yarn count, thermal shrinkages, and tensile properties are measured and discussed with the characteristics of the domestic and imported yarns. And, the physical and mechanical properties of these fabrics are also measured and discussed with the usage of these fabrics in the military and technical textiles fields. Hereafter, the differences of physical properties between domestic and foreign yarn specimens for high functional military and technical fabrics are estimated through this study.

• 한국염색가공학회지
• /
• 제22권2호
• /
• pp.163-172
• /
• 2010

In order to investigate the changes in mechanical properties of sanitary nonwoven fabrics actually used as a top sheet, the fabric was treated with a mixture of chitosan and nanosilver colloidal solution in accordance with the prescribed ratio. The former is a natural polymer with excellent biocompatibility and the latter can give an additional performance while compensating the weaknesses of chitosan of deteriorating adherence efficiency. It was shown that the bending and shearing characteristics of the chitosan/nanosilver treated fabrics decreased, which helped to make it softer, smoother and more flexible. The shape stability and drapability of the treated fabrics improved. As KES-FB system evaluation showed that Koshi was deduced, and both Numeri and Fukurami were increased. Thereby, the chitosan/nanosilver treated fabrics were smoother to provide elasticity. In the change of hand value compared to chitosan only treatment, a better THV was shown in the fabrics treated with chitosan/nanosilver mixed solution than the fabric treated with chitosan alone.

• 한국염색가공학회지
• /
• 제15권4호
• /
• pp.43-50
• /
• 2003

N-methylmorpholine-N-oxide(NMMO) is recently hewn as a solvent dissolving cellulose to produce a new regenerated cellulosic fiber, lyocell. In this study, four kinds of cellulosic fibers (lyocell, regular cotton, treated cotton with 50% and 75% NMMO aqueous solution) was examined and compared in terms of mechanical properties and dyeability. The swelling of cotton treated with NMMO aqueous solution is higher than that of cotton treated with water. In dyeing rate, the cotton treated with NMMO was faster than regular cotton. NMMO treatment decreased the crystallinity of cotton fabrics and improved their softness and smoothness.

• 한국염색가공학회지
• /
• 제19권1호
• /
• pp.37-44
• /
• 2007

In this study, for textile use, the octadecane of phase change materials(PCM) was encapsulated in several micro-diameter shell which prevents leakage of the material during its liquid phase. Microencapsulated PCM(PM) was prepared with the different weight ratio of core material to wall material and by interfacial polymerization methods using polyurea as shell material. Phase stability for O/W emulsion of PCM and PVA aq. (PE) was evaluated by Turbiscan Lab. The capsule formation win identified using FT-IR. Physical properties of microcapsules including diameter, particle distribution, morphology were investigated. Thermal transport properties of suede treated with PM(SPM) were determined by KES-F7 system.