• Fashion & Textile Research Journal
• /
• v.22 no.4
• /
• pp.515-522
• /
• 2020

This study examined the effect of the blend ratio of wool and polyester fibers, yarn and fabric structural parameters to the appearance property and the formability of worsted fabrics. The mechanical properties of twenty types of manufactured worsted and PET/wool blend fabrics were measured using KES-FB and FAST systems. Garment formability increases with the thickness and cover factor as well as increases with wool content. The correlation between KES-FB and FAST system showed a relatively high correlation with an extensibility of 0.98, bending and shear rigidity 0.71; both were higher than polyester synthetic fiber. The correlation coefficient of garment formability between KES-FB and FAST systems was 0.93 and the correlation coefficient between formability and fabric extensibility was 0.8. These results were higher than those of bending and shear rigidity. This revealed that garment formability was influenced by wool content, cover factor and fabric thickness; however, wool content and fabric thickness were the most important factors for the seam pucker. The garment formability of the worsted fabrics can be predicted by fabric mechanical properties measured from KES-FB and FAST systems.

• Fibers and Polymers
• /
• v.4 no.4
• /
• pp.145-150
• /
• 2003

Polypropylene nonwoven fabrics were exposed to He/$O_2$ atmospheric pressure glow discharge plasma. Surface chemical analysis and contact angle measurement revealed the surface oxidation by formation of new functional groups after plasma treatment. Weight loss (%) measurement and scanning electron microscopy analysis showed a significant plasma etching effect. It was investigated in low-stress mechanical properties of the fabrics using Kawabata Evaluation System (KES-FB). The surface morphology change by plasma treatment increased surface friction due to an enhancement of fiber-to-fiber friction, resulting in change of other low-stress mechanical properties of fabric.

• Fashion & Textile Research Journal
• /
• v.4 no.3
• /
• pp.273-283
• /
• 2002

In this study, the correlations of the two frictional testers have been investigated; one is the KES-FB4 system, the other is the Fabric-on-Fabric Frictional tester which was devised by authors. According to the results, the correlation between the frictional coefficients measured by the two testers has been shown highly as the load increased. But the effect of roughness of fabric surface was not dearly revealed in this study. The frictional characteristics of fabric woven from filament yarns were different with those of fabric woven from spun yarns. And, like the other materials, the effect of load on fabrics used in this experiment was related with the frictional force between two fabrics. The frictional behaviors, however, were obviously different with harder material because the frictional coefficients were not constant as the load increased.

• Science of Emotion and Sensibility
• /
• v.24 no.4
• /
• pp.149-156
• /
• 2021

The mechanical properties of a woven fabric made of SiC (silicon carbide) fibers were determined in this study using the KES-FB system. The woven fabric is used in high heat settings above 1500℃. Composite spun yarns were used to create SiC fibers. By analyzing the wearing properties, we studied the prospect of using the textiles as fire-retardant work clothes. Mechanical properties determine the wearing attributes. Therefore, the tensile linearity (LT), tensile resilience (RT), and shear stiffness (G) values of the fabric varied according to the yarn type (filament or spun yarn). The thickness, weight per square meter, and density of the fabric were found to have an effect on the shear hysteresis (2HG) and compression resilience (RC) values. In terms of wearable clothing qualities, the fabric qualities of the SiC composite yarn demonstrated the highest ratio of compressive energy to thickness (WC/T), which indicates bulkiness. The fabric manufactured from SiC composite yarns passed the KFI criteria for carbonation length and cumulative flame time in the flame-retardant test. Therefore, we discovered that the material can be used as a fire-resistant work cloth.

• Textile Coloration and Finishing
• /
• v.30 no.4
• /
• pp.227-236
• /
• 2018

As consciousness of safety becomes an important social issue, the demand for protective clothing is increasing. Conventional flame-retardant cotton working wear has low durability, and working wear with m-aramid fibers are stiff, heavy, less permeable, and expensive. In this study, recycled m-aramid and cotton have been blended to produce woven fabric of different compositions to enhance high performance and comfort to solve aforementioned problems. The fabrics were analyzed according to constituents and various structural factors. Mechanical properties were measured using KES-FB system. The measured thermal properties are TGA, $Q_{max}$, TPP and RPP. Fabric with polyurethane yarn covered by m-aramid/cotton spun yarn is observed to have good wearability. The fabric of open end spun yarn showed more stiffness than that of ring spun yarn. The sample with the high count of yarn has more smooth surface. In addition, high m-aramid content fabric is considered to have relatively high stiffness when using as clothing. In TGA the fabric with higher m-aramid content showed more stable decomposition behavior. The fabric having rough surface showed lower heat transfer properties in $Q_{max}$. The influence of the fabric thickness was important in convection and radiant heat test.

• Fashion & Textile Research Journal
• /
• v.8 no.5
• /
• pp.585-590
• /
• 2006

In the variation of physical properties of adhesive fabrics, the objective of this study is to analyze fitness of fusible interlining to four sorts of fabrics for men's suit with various structural parameters. Four fusible interlinings are used for adhering to fabrics for men's suit. Mechanical properties of these 16 adhesive fabrics fused with these interlinings are measured by KES-FB system for analysing appearance and wearing properties of garments and for examining the fitness of fusible interlining to the fabrics for men's suit. The variation of bending property for adhesive fabrics are found to be higher in the order of interlining 1(Cotton30/Rayon70, plain), interlining 2(Polyester30/Rayon70, warp knit), interlining 4(Polyester, shingosen fabrics with drawing textured yarn) and interlining 3(Polyester, double dot coating interlining). The variation of adhesive effect shows the same results with bending property and shows negative relation with extensibility in weft direction per extensibility in warp direction(EM2/EM1). The variation of peel strength of adhesive fabrics, woolen fabrics in the case of face fabrics and interlining 3 in the case of interlining shows the largest value respectively.

• Korean Journal of Human Ecology
• /
• v.15 no.2
• /
• pp.275-281
• /
• 2006

The purpose of this study is to investigate hand and sensibility of PET treated by Ultra-Violet (UV). The 4-channel PET knit fabric was treated by a self-made UV instrument in 5cm distance with different time frames-0min, 30min, and 90min. For hand evaluation, mechanical properties were measured by the KES-FB system. The environmental condition was controlled at 29$^{\circ}C$, 75% (R.H.)-summer standard climate. Twenty female students evaluated 'roughness', 'smoothness', 'wetness', 'stiffness', 'coolness', 'touch', 'preference', and 'comfort'. The outcomes of the experiment are as follows: The surface roughness of mechanical properties showed significant differences and the value of PET irradiated by UV for 90min was highest. The order of primary hand value such as NUMERI and FUKURAMI was in a following order-Untreated > 30min treated > 90min treated. Total hand value showed that PET irradiated by UV for 90min was appropriate for using summer fabric. The results of subjective sensibility were that the untreated and 30min treated PET were recognized as similar and had a good evaluation on 'comfort', 'preference' and 'the sense of touch'. This consequence disagreed with total hand value, because it was considered that subjects' hand sensibility was dependent on the feel of smoothness.

• Science of Emotion and Sensibility
• /
• v.8 no.4
• /
• pp.345-354
• /
• 2005

In this study, the mechanical properties and hand characteristics have been analyze4 according to fabric structural parameters such as the weft density and weave stricture of cotton fabric. KES-FB system was used to measure hand characteristics and mechanical properties of fabric. The weft density made an effect on bending and shear properties but not on tensile , compression, and surface properties. In case of wearing property, B/w, 2HG/G, 2HB/B, 2HB/W, $\sqrt[3]{B/W}$, $\sqrt{2HB/W}$, W/T, WC/W were affected tv the weft density. The crimp was highly correlated with the tightness, hand, wearing an4 mechanical properties, specially tensile linearity, bending, shear, and compression properties. The weft crimp influenced the bending, shear, compression resilience, surface roughness, hand, and wearing properties. The tightness has an effect on tile bending, shear, compression, surface friction, hand, and wearing properties.

• Science of Emotion and Sensibility
• /
• v.7 no.4
• /
• pp.25-33
• /
• 2004

This study surveys the fabric surface properties such as mean value of the friction coefficient(MIU), mean deviation of the friction coefficient(MMD) and mean deviation of surface roughness(SMD) due to warp and weft tension differences using KES-FB system. For this purpose, fabric is designed as 5 harness Satin weave using 75d/36f warp and 100d/192f weft polyester filaments, and is woven by OmegaR rapier loom by Textec Co.Ltd and Picanol-GTXR rapier loom by Picanol Co.Ltd respectively. These grey fabrics are processed on the same dyeing and finishing processes. The fabric surface properties according to the weaving looms are analysed with warp and weft weaving tensions. And also surveyed the difference of fabric surface properties according to the fabric positions such as center and each edge of fabrics for the sensitive garment.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.27 no.11
• /
• pp.1318-1329
• /
• 2003

The purpose of this study was to examine the effects of the structural characteristics of men's suit fabrics on the texture image and the preference, and to analyze the relationship between the preference and the practical sales ratio. In addition, the texture images and the preference of fabric and jackets made of the same fabrics were compared. As specimen, jackets for men's suit of 2002' S/S and their fabrics were collected. Questionnaires composed of 22 sensibility related and 21 fabric image related adjectives were developed. For the subjective evaluation of the texture image, both jackets and fabric samples were tested. Tests were performed with 100 female subjects in clothing department and apparel industry. For the objective evaluation, structural characteristics such as fiber contents, yarn twist, fabric count, thickness and weight were analyzed. Total Hand Value were calculated from mechanical properties determined by the KES-FB system. Factor analysis showed sensibilities were classified into 6 categories; "surface roughness", "weight", "density", "stiffness", "elasticity" and "wetness". Fabric images were classified into 4 categories; "classic", "original", "practical", and "stuffy". Depending on the method to show the specimen to the subjects, whether it is suit or fabric, statistically significant differences were observed with a number of adjectives for sensibilities and fabric images. The results of THV of KES did not agree with the preference of subjects, which suggests that we should be careful when using the KES system, which was developed for Japanese people. Price was considered to be another factor besides the texture image that influenced on purchase.