• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.1
• /
• pp.31-39
• /
• 2016

Power system engineers use power systems solution programs such as PSS/E, DSATool, Power World simulators for power system analysis. In this reason, KEPCO has begun to develop independent power system program, KW-PSS(KEPCO World Power system Solution) since 2002 and KW-PSS ver2.0 development was completed in 2011. However, it did not have much better functions compared with other programs. Therefore, we focused on the development of the practical and specialized functions. Consequently, PAZ(Power system AnalyZer) ver3.0 has been developed and it realized a differentiation than previous version. In other words, previous version focused on the basic function of power system analysis, PAZ ver3.0 has implemented many automated functions for power system operators were driven maximize operational efficiency. The unique feature of the implementation is as follows : Automated check for exceeding the breaker capacity, Scheduled outage automation, Control-file wizard for various voltage stability analysis, Scenario-based multiple transient stability analysis and Auto calculation of transmission line impedance. As shown in these functions, Those functions provide to use power system analysis easily by automation and simplification for power system engineers. We will secure national expertise through PAZ ver3.0. In addition it will be able to gain competitive edge through the steady development in the world market.

• JOURNAL OF ELECTRICAL WORLD
• /
• no.1 s.73
• /
• pp.25-29
• /
• 1983

• KEPCO Journal on Electric Power and Energy
• /
• v.3 no.2
• /
• pp.127-131
• /
• 2017

The present paper describes the slagging field data obtained with the one-dimensional process model for the 500 MW tangentially coal fired boiler in Korea. To obtain slagging field data in terms of thermal resistances [$m^2{\cdot}^{\circ}C/kW$], a number of plant data were collected and analyzed with the one-dimensional modelling software at 500 MW full load. The slagging field data for the primary superheater were obtained for six coal blends, and compared with two TMA (Thermo-Mechanical analyzer) slagging indices and the numerical slagging index, along with the conventional slagging indices which were modified with the ash loading. The advanced two TMA indices for six blended coals give a good slagging tendency when comparing them with the slagging field data, while the modified conventional slagging indices give a relatively poor agreement.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2004.11a
• /
• pp.705-708
• /
• 2004

한국전력공사는 검침업무의 복잡성을 단순화하고 유지보수에 따른 비용절감 등의 이유로 특정 제조회사의 통신방식이나 데이터구조 등에 구애받지 않도록 표준화된 전자식 전력량계의 통신프로토콜과 운용프로그램 개발을 수행하였다. 전자식 전력량계의 통신프로토콜을 통일하고 표준화된 검침용 운용프로그램을 사용함으로써 검침원에게는 다양한 검침용 운용프로그램 사용법을 익혀야하는 불편함을 없애고 각사별 검침용 장비의 유지관리에 따른 비용을 절감할 뿐만 아니라 저비용으로 보다 신뢰성 있는 원격검침 시스템 구축이 용이할 것으로 기대된다. 본 논문에서는 전자식 전력량계의 통신 프로토콜과 데이터구조, 운용프로그램 설계 및 구현에 대해 소개한다.

• Proceedings of the KIEE Conference
• /
• 1995.07b
• /
• pp.565-567
• /
• 1995

Though he is a experienced expert, it takes much time and considerable effort to review this items in detail since the widespread terms to plan distribution system is considered. Therefore it needs software system for planning of distribution system to solve much time and human resoureces due to manipulate many data and calculate sophiscated technology. The object this study raises its availability by assisting distribution works such as load forecast, substation planning in ChangWon city based on CADPAD software package.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.563-564
• /
• 2007

In recent years, equipment and network standards have been increasing in both number and complexity. Two standards that will soon be introduced to KOREA are the HV standards for assessing distorting and fluctuating loads, IEC 61000-3-6. Utility engineers, being under increasing time constraints, are turning more and more to software to quickly solve problems. This paper describes the methodology used to implement the above standards in Microsoft Excel in order to assist utility engineers to readily apply these standards in practical situations.

• Proceedings of the KIEE Conference
• /
• 1987.11a
• /
• pp.321-324
• /
• 1987

The development of SCADA system program has been studied for the purpose of upgrading its function and increasing the effect of system application. The results of this project are divided into 3 steps, Analysis of the system function and operating system, Improvement of programs for effective alarm/logging system, Development of programs for the statistical analysis of power system operation.

• KEPCO Journal on Electric Power and Energy
• /
• v.1 no.1
• /
• pp.105-108
• /
• 2015

A digital Governor (GOV) has been developed for being used for a Francis hydro turbine, and the validity of the GOV has been tested. As for the hardware system for the GOV, we purchased a basic digital control system that already had proven its reliability in the power industry. We developed a set of new GOV software and integrated it with the hardware system, and finally verified the performance of the whole GOV system. For the human-machine interface (HMI), we configured and implemented appropriate graphic interfaces for the turbine operations. This paper describes the major GOV control functions, approaches we took in developing the GOV control logics, and the validity tests and the results.

• Proceedings of the KIEE Conference
• /
• summer
• /
• pp.73-75
• /
• 2004

This paper presents the ability and the application of software packages for distribution planning which are DISPLAN(Distribution Planning System) and DLPLAN(Distribution Line Planning System) developed in KEPCO. After calculating size and position of maximum load by administration section for distribution, it forecasts the demand of distribution load considering growth location, increment, new load plan, etc of load by annual. Also it calculates distribution loss, voltage drop using modeled distribution line by you, and support for establishment and enlargement plan of substation and distribution line, decision of most optimal path. And it presents the abstract of used algorithm to develop this system.

• Proceedings of the KIEE Conference
• /
• 2001.07d
• /
• pp.2219-2221
• /
• 2001

A communication protocol for automatic meter reading is designed for electronic power meter. Communicational functions and data structures are standardized and data reading software is developed according to the developed protocol. The communication protocol is designed with reference specifications, IEC 62056-31 and Distributed Network Protocol(DNP). For design, communicational functions and specifications of the industrial meters were analyzed for the purpose of developing a new one for KEPCO meters. The protocol is designed with 3 layer model, physical layers, data link layer and application layer. A documentation was completed with data gathering, data classification, authentication, error detection. An emulator system was made for testing the protocol. A meter reading software was developed using the protocol. Many different protocols and meter reading softwares are integrated into one with the developed protocol and software as KEPCO's standard.