• Journal of the Optical Society of Korea
• /
• 제13권2호
• /
• pp.206-212
• /
• 2009

This study presents the compact zoom lens with a zoom ratio of 5x for a mobile camera by using a prism. The lens modules and aberrations are applied to the initial design for a four-group inner-focus zoom system. An initial design with a focal length range of 4.4 to 22.0 mm is derived by assigning the first-order quantities and third-order aberrations to each module along with the constraints required for optimum solutions. We separately designed a real lens for each group and then combined them to establish an actual zoom system. The combination of the separately designed groups results in a system that satisfies the basic properties of the zoom system consisting of the original lens modules. In order to have a slim system, we directly inserted the right-angle prism in front of the first group. This configuration resulted in a more compact zoom system with a depth of 8 mm. The finally designed zoom lens has an f-number of 3.5 to 4.5 and is expected to fulfill the requirements for a slim mobile zoom camera having high zoom ratio of 5x.

• 동력기계공학회지
• /
• 제11권4호
• /
• pp.12-17
• /
• 2007

Recently, many small and medium size diesel vehicles have been equipped with turbocharger and EGR system to get high performance and reduce $NO_x$ emissions but its application to heavy-duty diesel engine is not common yet. In this work, the simulation model for EURO-3 engine was developed using WAVE and then its performance and emission level were verified by comparing with experimental results. The possibility of current EURO-3 engine equipped with LPL EGR system which would be satisfied the EURO-5 regulation are examined. ESC 13 mode was chosen as the primary engine test mode, and the injection timing and fuel quantity were changed to compensate the lost engine performance caused by EGR. The system developed in this study shows that the current EURO-3 engine could satisfy EURO-5 $NO_x$ regulation by applying LPL EGR.

• Journal of Biosystems Engineering
• /
• 제27권5호
• /
• pp.451-458
• /
• 2002

This paper introduces that livestock can be effectively managed by an individual electronic identification system. The proposed system was composed of the original code transmitter, receiver, personal computer, micro-processor, and RS485 telecommunications module. In the individual electronic identification system, the signal including encoded information of a milk-cow was transmitted from an original code transmitter to a micro-processor through RS485 telecommunications module. The transmitted signal can be successfully displayed in a personal computer. This system can be managed by 9999 individuals with a original code transmitter. The recognition rate of an individual electronic identification system was 98.5% and also auto-feeder operates very well. an individual electronic identification system was developed for automation of stockbreeding management. To automate the breeding management, it is necessary to obtain and analyze the individual information distinguished from others preferentially.

• 동력기계공학회지
• /
• 제17권5호
• /
• pp.3-12
• /
• 2013

• 한국태양에너지학회 논문집
• /
• 제38권5호
• /
• pp.37-47
• /
• 2018

The heating performance of a solar thermal seasonal storage system applied to a glass greenhouse was analyzed numerically. For this study, the gardening 16th zucchini greenhouse of Jeollanam-do agricultural research & extension services was selected. And, the heating load of the glass greenhouse selected was 576 GJ. BTES (Borehole Thermal Energy Storage) was considered as a seasonal storage, which is relatively economical. The TRNSYS was used to predict and analyze the dynamic performance of the solar thermal system. Numerical simulation was performed by modeling the solar thermal seasonal storage system consisting of flat plate solar collector, BTES system, short-term storage tank, boiler, heat exchanger, pump, controller. As a result of the analysis, the energy of 928 GJ from the flat plate solar collector was stored into BTES system and 393 GJ of energy from BTES system was extracted during heating period, so that it was confirmed that the thermal efficiency of BTES system was 42% in 5th year. Also since the heat supplied from the auxiliary boiler was 87 GJ in 5th year, the total annual heating demand was confirmed to be mostly satisfied by the proposed system.

• Korean Chemical Engineering Research
• /
• 제48권5호
• /
• pp.632-637
• /
• 2010

1기압 298.15 K에서 water + tetrahydrofuran + butyl acetate + isoamyl alcohol를 포함한 4성분 액-액추출계의 상평형에 대하여 연구하였다. Butyl acetate + isoamyl alcohol을 혼합용매로 사용하였으며, 수용액으로부터 tetrahydrofuran를 추출함에 있어서 혼합용매 사용의 효과를 고찰하기 위하여 각 4성분계에 대한 용해도 곡선, 대응선(Tie-line), 분배도, 선택도를 측정하였다. 또한 실험에 의한 대응선(Tie-line) 데이터를 UNIFAC 모델식으로부터 예측된 값들과 비교한 결과, 액-액평형에 대한 UNIFAC 모델이 본 실험에 설정된 4성분계에 대하여 혼합용매 비율 75/25, 50/50, 25/75에 따라 3.35, 5.21, 5.65%의 편차가 나타남을 알 수 있었다.

• Bulletin of the Korean Chemical Society
• /
• 제32권spc8호
• /
• pp.2981-2987
• /
• 2011

A comparative study of the photodynamic and antioxidant activities of methyl pheophorbide-a (MPa, 1) and its transition metal(II) complexes (2-5) is described. Four transition metal complexes (palladium(II): 2, zinc(II): 3, cobalt(II): 4 and copper(II): 5) of MPa were prepared by reaction between the corresponding transition metal and 1, respectively, and were characterized by $^1H$-NMR and UV-vis spectroscopic and mass spectrometric analyses. In vitro results show a photodynamic therapy (PDT) efficacy with A549 cells might be attributed to a heavy atom effect of the transition metal complexes of MPa. Among them, 4 and 5 showed higher photodynamic activity than that of 1 at the concentration of 5 ${\mu}M$ at 24 h incubation after photoirradiation. The images of morphological change for 2-5 show evidence for the PDT effect with A549 cells. And the all transition metal complexes of MPa showed higher antioxidant activity than that of MPa, in which 4 showed the highest antioxidant activity.

• ETRI Journal
• /
• 제42권5호
• /
• pp.721-733
• /
• 2020

Recently, there is an increasing demand for ultra-low-latency (ULL) services such as factory automation, autonomous driving, and telesurgery that must meet an end-to-end latency of less than 10 ms. Fifth-generation (5G) New Radio guarantees 0.5 ms one-way latency, so the feasibility of ULL services is higher than in previous mobile communications. However, this feasibility ensures performance at the radio access network level and requires an innovative 5G network architecture for end-to-end ULL across the entire 5G system. Hence, we survey in detailed two the 3rd Generation Partnership Party (3GPP) standardization activities to ensure low latency at network level. 3GPP standardizes mobile edge computing (MEC), a low-latency solution at the edge network, in Release 15/16 and is standardizing time-sensitive communication in Release 16/17 for interworking 5G systems and IEEE 802.1 time-sensitive networking (TSN), a next-generation industry technology for ensuring low/deterministic latency. We developed a 5G system based on 3GPP Release 15 to support MEC with a potential sub-10 ms end-to-end latency in the edge network. In the near future, to provide ULL services in the external network of a 5G system, we suggest a 5G-IEEE TSN interworking system based on 3GPP Release 16/17 that meets an end-to-end latency of 2 ms.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2006년도 하계학술발표대회 논문집
• /
• pp.749-754
• /
• 2006

This study performed of a water cooling system by using a steam ejector and jet condenser to drop the temperature of the water in aquafarm by about $5^{\circ}C$ from $25^{\circ}C$ or higher in this research, to replace the present water cooling system, Ive focused on a water cooling system operated by latent heat of evaporation, thus this system needs a vacuum pressure to evaporate the water in enclosed tank. The water cooling effects are dependent on the vacuum pressure in the enclosed tank, and the cooling water is generated by evaporation. As the experimental results, the absolute vacuum pressure obtained was about $5{\sim}8mmHg$ using a steam driven ejector with jet condenser in experiments. The obtained results are respectively ${\Delta}T=7^{\circ}C$, ${\Delta}T=5^{\circ}C$ and ${\Delta}T=5.5^{\circ}C$ at heat exchanger flow rate 4L/M. The obtained results are respectively ${\Delta}T=5.5^{\circ}C$, ${\Delta}T=5.5^{\circ}C$ and ${\Delta}T=5.5^{\circ}C$ at heat exchanger flow rate 4.5L/M.

• Bulletin of the Korean Chemical Society
• /
• 제26권5호
• /
• pp.795-801
• /
• 2005

New PPV derivatives which contain electron-withdrawing trifluoromethyl ($CF_3$) group, poly[2-(2-ethylhexyloxy)-5-(4-trifluoro methylphenyl)-1,4-phenylenevinylene] (EH$CF_3$P-PPV), and poly[2-(2-ethylhexyloxy)-5-(3,5-bis(trifluoromethyl)-phenyl)-1,4-phenylenevinylene] (EHB$CF_3$P-PPV), have been synthesized by GILCH polymerization. As the result of the introduction of the electron-withdrawing $CF_3$ group to the phenyl substituent, the LUMO and HOMO energy levels of EH$CF_3$P-PPV (2.8, 5.1 eV) and EHB$CF_3$P-PPV (3.0, 5.3 eV) were lower than those of known poly[2-(2-ethylhexyloxy)-5-phenyl-1,4-phenylenevinylene] (EHP-PPV) (2.6, 4.9 eV). These polymers have been used as the electroluminescent (EL) layers in double layer lightemitting diodes (LEDs) (ITO/PEDOT/polymer/Al). EH$CF_3$P-PPV, and EHB$CF_3$P-PPV show maximum photoluminescence (PL) peaks at ${\lambda}_{max}$ = 550, 539 nm, and maximum EL peak at ${\lambda}_{max}$ = 545, 540 nm, respectively. The current-voltage-luminance (I-V-L) characteristics of the polymers show that turn-on voltages of EH$CF_3$P-PPV and EHB$CF_3$P-PPV are around 4.0 and 3.5 V, respectively.