• 폴리머
• /
• 제34권2호
• /
• pp.159-165
• /
• 2010

리빙 음이온 중합에 의해 sec-BuLi으로 개시된 polystyryllithium (PSLi)과 polybutadienyllithium (PBDLi)의 연쇄 말단에 di(2-pyridyl)ketone(DPK)을 반응시켜 dipyridine이 말단 관능화된 폴리스티렌과 폴리부타디엔을 각각 합성하였다. 분자량이 1000~2000 g/mol인 PSLi과 PBDLi을 사용하여 TMEDA 존재하에서 말단 DPK-관능화 반응 후 GPC에 의한 분자량 특성분석과 $^1H$-NMR, $^{13}C$-NMR 분석에 의한 고분자 말단 구조 분석을 통하여 말단 관능화 수율과 함께 유기리튬의 피리딘 링 친핵성 부가 반응으로 인한 커플링 현상을 확인하였다. PBDLi에 DPK를 부가하는 일반적인 말단 관능화 방법에 비하여 역으로 부가하는 방법에서 최대 9% 정도의 커플링 정도와 86% 이상의 관능화 수율을 보였다. 이 반응에서 LiCl 첨가효과는 없었으며, 반응온도가 낮을수록 높은 관능화 수율을 나타내었다.

• International Journal of Advanced Culture Technology
• /
• 제3권1호
• /
• pp.129-137
• /
• 2015

The study of photocatalysis of nano titanium dioxideon the cotton fabrics have been investigatedthrough self-cleaning properties. The mini-emulsion technique was employed to prepare the encapsulation of titanium dioxide nano particles in polystyrene beads prior used. The mini-emulsion was coated on the cotton fabrics using Pad-dry method.The loading amount of TiO2particles into the mini-emulsion were various from 1%wt to 40%wt. The particles sizes of the TiO2-encapsulated polystyrene mini-emulsion were investigated by dynamic light scattering. It was noticed that the particle size of the mini-emulsion was in the range of 100- 200 nm. The morphology of treated cotton fabrics were investigated using scanning electron microscopy. The crystal structure of TiO2-encapsulated PS mini emulsion which coated on cotton fabrics were examined by X-ray diffraction spectroscopy. In order to investigate the photocatalytic activities of TiO2 through the selfcleaning characteristics of the cotton fabrics, colorant stains were created on the samples. Coffee stains were used as colorant organic stains. The result shown that the coffee stained on the cotton fabrics significantly showed the improving of the self-cleaning properties under UV radiation.

• 공업화학
• /
• 제23권2호
• /
• pp.131-137
• /
• 2012

Layer-by-layer 방법을 기초로 기존의 방법보다 간단히 합성된 껍질 두께를 달리한 속이 빈 구형체인 폴리아닐린과 폴리피롤을 리튬이차전지 양극 활물질로 사용하여 껍질 두께에 따른 방전용량에 미친 효과를 조사하였다. 유화중합으로 중합된 음이온계 계면활성제에 의해 표면 개질 된 폴리스타이렌을 지지체로 사용하였다. 아닐린과 피롤의 모노머 양을 각각 다르게 추가하여 합성하여 쉘 두께를 조절하였다. 그 후, 유기용매를 통해 폴리스타이렌을 제거하여 속이 빈 구형체를 제조하였다. 이는 리튬이차전지에서 전해액과의 접촉을 증가시키기 위해 넓은 표면적을 가진 속이 빈 구형체 구조로 제조하고, 분자량 조절이 어렵고 단위부피당 질량이 낮아 용량이 낮은 단점을 가진 고분자를 껍질 두께의 조절로 단점을 보완하고자 하였다. 아닐린 모노머 양을 1.2, 2.4, 3.6, 4.8 및 6.0 mL로 증가시킨 경우 폴리아닐린의 껍질 두께는 30.2, 38.0, 42.2, 48.2 및 52.4 nm이고 피롤 모노머 양이 0.6, 1.2, 2.4 및 3.6 mL일 경우 양극재료는 폴리아닐린의 경우 껍질 두께가 30.2, 42.2 및 52.4 nm 일 때, 10회 후, 방전 용량은 약 ~18, ~29 및 ~62 mAh/g으로 나타났으며, 폴리피롤의 경우 껍질 두께가 16.0, 22.0, 27.0 및 34.0 nm 일 때, 15회 후, 방전용량은 약 ~15, ~36, ~56 및 ~77 mAh/g으로 껍질의 두께가 증가할수록 방전용량 역시 증가하는 것을 알 수 있었다.

• 한국물환경학회지
• /
• 제31권2호
• /
• pp.166-180
• /
• 2015

Pollutant in watersheds comes from two major sources which are NPS (nonpoint source pollution) and PS (point source pollution). Most of the pollutant can be treated by wastewater treatment plants. However, wastewater treatment plants may not be an appropriate practice to improve water quality for the watersheds with large portion of NPS pollutant and NPS pollution from direct runoff and baseflow has different characteristics. Therefore the practices to improve water quality need to be comprehensive for pollutants by both direct runoff and baseflow. Riparian buffer, one of practices to manage pollutant in watershed, has been applied to reduce pollutant not only from direct runoff but also baseflow. In this study, the scenarios for pollutant reduction by wastewater treat plants and the nitrogen reduction by riparian buffer were simulated using SWAT-REMM to suggest an effective plan for pollutant reduction from baseflow. Riparian buffer provided nitrogen reduction of 0.2~75.0% in YbB watershed and 38.0~47.0% in GbA watershed. The result indicates that riparian buffer is effective to reduce the pollutant especially from baseflow, and it suggested as suitable for the a watershed which WWTP discharge is not capable to reduce enough pollutant.

• Journal of Biosystems Engineering
• /
• 제31권5호
• /
• pp.423-429
• /
• 2006

The heat pump water heater developed in this research consisted of one evaporator, one compressor, 1st condenser, 2nd condenser, one expansion valve, one water tank, one recirculation circuit and etc. The performance of heat pump water heater was tested and analyzed. The quantities of output water changed linearly from 2380 to $660{\ell}/h$, and the output water temperature changed curvedly from 29.9 to $44.5^{\circ}C$ when the opening rate of recirculation valve changed from 0 to 100%. The COP of heat pump water heater increased from 3.0 to 3.8 when the quantities of output water changed from 660 to $2380{\ell}/h$. When the temperature distributions of water tank were measured during 50 minutes after turning on the heat pump, the temperature stratification by the level appeared apparently. When the inlet water temperature changed from 30 to$50^{\circ}C$, the output energy of heat pump hardly changed. The surface area of double pipe heat exchanger changed from 0.429 to $6.254m^2$ when the compressor capacity increased from 1.0 to 50.0 PS.

• 전기전자학회논문지
• /
• 제15권4호
• /
• pp.305-312
• /
• 2011

A primary interest of this work is to develop an efficient and powerful repetitive pulser system for the application of ultra wide band generation. The important component of the pulser system is a small-sized coaxial type spark gap with planar electrodes filled with SF6 gas. A repetitive switching action by the coaxial spark gap generates two consecutive pulses in less than a microsecond with rise times of a few hundred picoseconds (ps). A set of several parameters for the repetitive switching of the spark gap is required to be optimized in charging and discharging systems of the pulser. The parameters in the charging system include a circuit scheme, circuit elements, the applied voltage and current ratings from power supplies. The parameters in the discharging system include the spark gap geometry, electrode gap distance, gas type, gas pressure and the load. The characteristics of the spark gap discharge, such as breakdown voltage, output current pulse and recovery rate are too dynamic to control by switching continuously at a high pulse repetition rate (PRR). This leads to a low charging efficiency of the spark gap system. The breakthrough of the low charging efficiency is achieved by a parallel operation of two spark gaps system. The operational behavior of the two spark gaps system is presented in this paper. The work has focused on improvement of the charging efficiency by scaling the PRR of each spark gap in the two spark gaps system.

• 농업과학연구
• /
• 제36권2호
• /
• pp.219-224
• /
• 2009

효소적 공법을 이용하여 합성한 기능성 modified-butterfat들(MF668과 MF866)의 향기성분 분석을 전자코와 SPME-GC/MS를 가지고 수행하였다. 전자코 분석결과, 기질로 사용된 ABF와 FSO, 그리고 생성물인 MF668과 MF866은 제1주성분 값의 95.16%기여율로 서로 다른 향기패턴을 갖음을 확인하였다. 신속하며 간편한 SPME-GC/MS분석결과, MF668과 MF866에서는 기질에서보다 더 다양한 aldehyde류, ketone류, acid류 등이 검출되었다. 이는 반응과정 중 생성될 수 있는 산화물로 추후 항산화제 연구가 필요함을 입증하였다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제5권3호
• /
• pp.455-459
• /
• 1992

Five type of formulated diet from agricultural by-products (ABP) were fed to four breedtype of cattle in feedlot. The ABP used are palm kernel cake (PKC), palm press fibre (PPF), palm oil mill effluent (POME), cocoa pod (COP), coffee pulp (COF) and pineapple waste (PAP). The formulated diets are PS (52% PKC, 15% PPF and 30% POME), PF (57% PKC, 20% PPF and 20% POME), PA (2% PKC and 55% PAP), CO (42% PKC and 55% COP) and CF (67% PKC and 30% COF) with 1% urea, 1% NaCl and 1% vitamins premix. The cattle breedtypes are Kedah-Kelantan (KK), Brahman-KK (BK), Hereford-KK (HK) and Sahiwal-Friesian (SF). The result showed that breedtype significantly affect all the carcass characteristic except dressing percentage. Each breedtype has it's specific carcass characteristics. HK cattle gave high marbling, BK has high % of carcass bone, KK has high % of carcass meat and low % of carcass fat (lean meat type) and SF has high % of carcass fat. Diet-type significantly affect the deposition of fat in the carcass. High moisture diets (PA and CO) produced significantly higher % carcass bone, the lowest % carcass fat and the highest % carcass meat (65.3%). PF, CF, PA and CO diets produced 63.4%, 59.9%, 55.3% and 54.1% carcass meat respectively.

• Molecular & Cellular Toxicology
• /
• 제1권1호
• /
• pp.52-61
• /
• 2005

Transcript profiling is a particularly valuable tool in the field of steroid receptor biology, as these receptors are ligand-activated transcription factors and therefore exert their initial effects through altering gene expression in responsive cells. Also, an awareness of endocrine disrupting chemicals (EDCs) and their potential screening methods to identify endocrine activity have been increased. Here we developed an in-house cDNA microarray, named KISTCHIP-400 ver. 1.0, with 416 clones, based on public database and research papers. These clones contained estrogen, androgen, thyroid hormone & receptors, sex hormone signal transduction & regulation, c-fos, c-myc, ps2 gene, metabolism related genes etc. Also, to validate the KISTCHIP-400 ver. 1.0, we investigated gene expression profiles with reference hormones, $10^{8}\;M\;17{\beta}-estradiol,\;10^{-7}\;M\;testosterone\;and\;10^{-7}\;M$ progesterone in MCF-7 cell line. As the results, gene expression profiles of three reference hormones were distinguished from each other with significant and identified 33 $17{\beta}-estradiol$ responsive genes. This study is in first step of validation for KISTCHIP-400 ver. 1.0, as following step transcriptional profile analysis on not only low concentrations of EDCs but suspected EDCs using KISTCHIP-400 ver. 1.0 is processing. Our results indicate that the developed microarray may be a useful laboratory tool for screening EDCs and elucidating endocrine disrupting mechanism.

• 한국전기전자재료학회논문지
• /
• 제25권3호
• /
• pp.224-228
• /
• 2012

We have developed new materials that lead to methyl meth acrylate monomer and styrene monomer to using polymerization method. The materials have a powder form and show liquid behavior. We call the "Electronic Bead". An our experiment, a positive-charged particle has $TiO_2$, polymer and CCA(-), while a negative-charged particle consists of carbon black, polymer and CCA(+). The charged particles have electrical characteristic of white -10 uC/g and black 10 uC/g, respectively. Also, these particles have good fluidity by additive of nano-sized silica. Using these materials, we demonstrated prototype displays that have $320{\times}320$ array of pixels and 6-in-diagonal viewable image size, driven by passive-matrix addressing. The reflectivity shows about 30% even though our experiment is at the beginning point. Also, the panel has contrast ratio 6:1. We think there are many chances to improve reflectivity through modifying components of particle resin, mixture ratio of each particle, panel structure and so on.