• Title/Summary/Keyword: K2PS

Search Result 1,086, Processing Time 0.034 seconds

Characteristics of Ride Vibrations in Rotary Tillage and Plowing Operations by Tractor (트랙터 로터리 작업과 쟁기 작업의 승차 진동 특성)

  • 박영준;박서범;김경욱
    • Journal of Biosystems Engineering
    • /
    • v.29 no.3
    • /
    • pp.207-216
    • /
    • 2004
  • This study was intended to investigate the characteristics of ride vibrations transmitted to tractor operator during rotary tillage and plowing operations. Seat accelerations of a 41 ps diesel tractor in rotary tillage and plowing were measured and evaluated as specified in the ISO 2631-1. Effects of working speed and tilling depth on ride vibration were investigated. The level of ride vibration was also evaluated in terms of health guidance caution zones. Some of the results of the study are as follows: 1. The level of ride vibration in plowing was about 4.3 times greater than in rotary tillage. 2. The effect of working speed in rotary tillage differs depending upon the tillage depth. The level of ride vibration was increased with the speed, but it decreased over a certain tillage depth. Fore and aft vibration was 2.2-2.7 times severer than horizontal and vertical vibrations. Dominant frequency band was 1-3.15 ㎐ in fore and aft, 1-3.15㎐ and 16-25㎐ in horizontal, and 16-25㎐ in vertical directions. 3. Plowing reduced the ride vibration by 42.8-50.2%. But its positive effect decreased as the plowing speed increased. In plowing operation, ride vibration was similar degrees in fore and aft, horizontal and vertical directions. The dominant frequency band in plowing operation was 1-2.5㎐ in fore and aft, 1-2.5㎐ in horizontal, and 1-8㎐ in vertical directions. 4. On a basis of daily work hours of 4, total level of ride vibrations in plowing operation is likely to be harmful to operator's health.

A Study on the Triage and Statitical Data by the 5 Developmental Stages of the Children in Emergency Room, PNU (일 종합병원 응급실 내원아동의 Triage 및 발단단계별 통계적 고찰)

  • Kim Young Hae;Lee Hwa Ja;Cho Seok Ju
    • Child Health Nursing Research
    • /
    • v.5 no.2
    • /
    • pp.136-150
    • /
    • 1999
  • The subjects, under 18 old, 2,694 children who visited ER during 1998, were surveyed by the Triage and other statitical data. The results were as follows 1. The male to female ratio was 1.7 : 1, and the toddler(1-4 old) was the majority. 2. Triage ; critical 1.3%, acute 14.6%, urgent 29.5%, nonemergent 54.6%. 3. The reasons of visiting ER ; 1) The children had diseases(46.5%), injury (36.9%), TA(5.6%) and toxication(1.0%). 2) In diseases, male to female ratio was 1.5 : 1 and in injury, male to female was 2 : 1. 3) Among the children having in TA, 12-18 old groups was the majority(34.9%). 4. The time of visiting : the 20:00 - 22:00 was the majority(16.9%). 5. By monthly and seasonal distribution ; Jan. (9.7%), Mar. and May(9% respectively, Dec. and July(6.7%) respectively. The children who visted ER in spring and autumn showed higher portion than those of summer and winter. 6. Results ; admission(27.4%), discharge(68.4%), operations(2.8%), and DOA and DAA(0.4%), The mortality of the infancy and toddler groups was 83.3%. The infancy group showed the highest rate of admission. 7. The time of staying in ER ; 1-2 hrs was the major group(23.3%) and the average was 4.6 hours. 8. By clinical departments ; Ped. was 34.4%, PS was 20.8%, Dental Surgery was 10.3% and Dermatology was 0.9%. 9. The types of visting ; the group who visited by themselves was 80%, transfer from the primary and secondary clinic was 17% and OPD was 3.0%. 10. The traffic means . by the own cars and taxi were 87.6%, by hospital ambulance was 6.1% and by 119 ambulance was 4.3%.

  • PDF

Production of Mn-Dependent Peroxidase from Bjerkandera fumosa and Its Enzyme Characterization

  • Jarosz-Wilkolazka, Anna;Luterek, Jolanta;Malarczyk, Elzbieta;Leonowicz, Andrzej;Cho, Hee-Yeon;Shin, Soo-Jeong;Cho, Nam-Seok
    • Journal of the Korean Wood Science and Technology
    • /
    • v.35 no.2
    • /
    • pp.85-95
    • /
    • 2007
  • Manganese dependent peroxidase (MnP) is the most ubiquitous enzyme produced by white-rot fungi, MnP is known to be involved in lignin degradation, biobleaching and oxidation of hazardous organopollutants. Bjerkandera fumosa is a nitrogen-unregulated white-rot fungus, which produces high amounts of MnP in the excess of N-nutrients due to increased biomass yield. The objective of this study was to optimize the MnP production in N-sufficient cultures by varying different physiological factors such as Mn concentration, culture pH, and incubation temperature. The growth of fungus was optimal in pH 4.5 at $30^{\circ}C$, $N_2$-unregulated white-rot fungus produces high amounts of MnP in the excess N-nutrients. The fungus produced the highest level of MnP (up to $1000U/{\ell}$) with $0.25g/{\ell}$ asparagine and $1g/{\ell}$ $NH_4Cl$ as N source at 1.5 mM $MnCl_2$ concentration, pH value of 4.5 at $30^{\circ}C$. Purification of MnP revealed the existence of two isoforms: MnPl and MnP2. The molecular masses of the purified MnPl and MnP2 were in the same range of 42~45 kDa. These isoforms of B. fumosa strictly require Mn to oxidize phenolic substrates. Concerned to kinetic constants of B. fumosa MnPs, B. fumosa has similar Km value and Vmax compared to the other white-rot fungi.

Surgical Treatment of Congenital Aneurysms of Sinus of Valsalva A report of 10 years` experience of 18 consecutive cases (선천성 Valsalva 동 동맥류의 수술요법)

  • Kim, Gi-Bong;Seo, Gyeong-Pil
    • Journal of Chest Surgery
    • /
    • v.18 no.2
    • /
    • pp.265-272
    • /
    • 1985
  • Congenital aneurysm of sinus of Valsalva is one of the rare congenital heart disease, which is usually asymptomatic until rupture. The aneurysm usually ruptures into a cardiac chamber and produces an aorto-intracardiac fistula. Ruptured aneurysm is a grave lesion in that it causes heart failure and subsequent death. If, however, it is discovered in its early stages and operated on properly, it can be corrected with considerable success. Form January 1975 through December 1984, 18 consecutive patients with congenital aneurysm of sinus of Valsalva underwent corrective surgery using total cardiopulmonary bypass in our department of Thoracic Surgery. 1. The incidence was about 0.9% of surgical cases of congenital heart disease during that period. 2. 13 were males and 5 females, with ages ranging 12 years to 52 years. 3. Associated anomalies were VSD in 14, infundibular PS in 1, aberrant muscle band in RVOT in 1, and secondary aortic insufficiency in 9. 4. 17 were suggested to arise from right coronary sinus and 1 from noncoronary sinus; Among 17, 12 ruptured into right ventricle, and one from noncoronary sinus into right atrium. 5. Surgical correction was performed by means of direct suture closure with combined pledget or patch graft after aneurysm resection, and associated lesions were also corrected simultaneously. 6. There was only one case of operative mortality, and all the other patients were relatively uneventful in their follow-up studies.

  • PDF

A successful Mustard operation for complete transposition of the great arteries combined with VSD, ASD, dextrocardia and PS: a report of one case (심실중격결손, 심방중격결손, 폐동맥협착과 우심증을 동반한 완전대혈관전위증의 치험)

  • 조중구
    • Journal of Chest Surgery
    • /
    • v.15 no.3
    • /
    • pp.346-354
    • /
    • 1982
  • A Complete transposition of the great arteries combined with V.S.D, A.S.D, dextrocardia, and P.S is a rare congenital anomaly. The patient was a 10 year-old female whose complaints were frequent URI, exertional dyspnea, and cyanosis at rest since birth. Cheat X-ray films showed Dextrocardia ; situs inversus, moderate cardiomegaly, and Characteristic egg-shape heart shadow. E.K.G, Echocardiography, Cardiac Catheterization, and Angio-Cardiography were performed. Open heart Surgery was done under diagnosis of d-TGA, Dextrocardia, V.S.D, A.S.D, and P.S. At the time of Operation, Dextroeardia, T.G.A, Secndum type A.S.D, A.S.D, and P.S. At the time of Operation, Dextroeardia, T.G.A, Secndum type A.S.D. ($2.0{\times}2.0cm$. in diameter), V.S.D. type II ($1.5cm{\times}1.5cm$ in diameter), and pulmonary valvular stenosis were noted. Mustard operation using pericardial Baffle in the atrium for T.G.A. was perforsned. Teflon patch graft for closure of V.S.D. through tricuspid orifice and pulmonary Valvulotomy through pulmonary arteriotomy were performed. The post-op, low cardiac output Syndrome and dysrhythmicawere developed till Postoperative day #7, so that was controlled by inotropic and antiarrhythmic agents. After that, patient's conditions were Uneventful.

  • PDF

A Study of Local Ventilation Design on PC Programm (국소환기 설계의 전산화에 관한 연구)

  • Yoon, Myong Cho
    • Journal of Korean Society of Occupational and Environmental Hygiene
    • /
    • v.3 no.2
    • /
    • pp.213-226
    • /
    • 1993
  • The purpose of this study is to computerize the design of single source for a duct work system which is essential for the improvement of working places. There are different types of hood, such as general hood, push pull hood and canopy hood. And out of these three types, general hood and canopy hood were used as subjects of this study. The software used here was Quattro Pro 123 programm, and the hardware was IBM PS/SX(type 5510-SK4 S/N 83-05164). And the results are tabulated in

    and
    . All of the hazardous factors of working places, except for physical factors, such as noise, vibration, illumination and etc, are control measurement related. In order words, workiong places that have problems with toxic gas, mist, fume, dust, odors, biological factors or wetness can be improved by means of the local ventilation design. However, the reqires very complicate processes, and in the case of canopy hood, particularly, one runs into difficulties due to frequent discrepancies generated from calculations through many processes. Recently, progress of the computer hardware technics has been dazzling, and also the software is development rapidly. As proven in the results of this study, it is good that designs for industrial ventilation systems are readily available for easy use. It is hopeful that young scholars will develop easier and quicker methods for local ventilation designs in the future.

  • PDF
  • Improved prestressed concrete girder with hybrid segments system

    • Yim, Hong Jae;Yang, Jun Mo;Kim, Jin Kook
      • Structural Engineering and Mechanics
      • /
      • v.65 no.2
      • /
      • pp.183-190
      • /
      • 2018
    • The prestressed concrete (PSC) technology that was first developed by Freyssinet has significantly improved over the past century in terms of materials and structural design in order to build longer, slender, and more economic structures. The application of prestressing method in structures, which is determined by the pre-tension or post-tension processes, is also affected by the surrounding conditions such as the construction site, workforce skills, and local transportation regulations. This study proposes a prestressed concrete girder design based on a hybrid segment concept. The adopted approach combines both pre-tension and post-tension methods along a simple span bridge girder. The girder was designed using newly developed 2400 MPa PS strands and 60 MPa high-strength concrete. The new concept and high strength materials allowed longer span, lower girder depth, less materials, and slender design without affecting the lateral stability of the girder. In order to validate the applicability of the proposed hybrid prestressed segments girder, a full-scale 35 m girder was fabricated, and experimental tests were performed under various fatigue and static loading conditions. The experimental results confirmed the feasibility of the proposed long-span girder as its performance meets the railway girder standards. In addition, the comparison between the measured load-displacement curve and the simulation results indicate that simulation analysis can predict the behavior of hybrid segments girders.

    Enhanced Phytoremediation of Trichloroethylene - Contaminated Soil by Poplar-Colonizing Recombinants

    • 심호재
      • Proceedings of the Korean Society of Soil and Groundwater Environment Conference
      • /
      • 2000.11a
      • /
      • pp.182-195
      • /
      • 2000
    • Indigenous bacteria from poplar roots (Populus mnadensis var. eugenei, 'Imperial Carolina') and Southern Californian shrub rhizospheres as well as two tree-colonizing Rhizobium strains (ATCC 10320 and 35645) were genetically engineered to express constitutively and stably toluene o-monooxygenase (TOM) from Burkholderia cepacia G4 by integrating the torn locus into the chromosome. The poplar and Rhizobium recombinants degraded trichloroethylene (TCE) at 0.8-2.1 nmol/min.mg protein (initial TCE concentration, 10u M) and competitive against the unengineered hosts in wheat and barley rhizospheres for one month (colonization at 1-23 $\times$ 10$^{5}$ CFU/cm root). In addition, six of these recombinants colonized poplar roots stably and competitively with populations as high as 79 $\pm$ 12% of all rhizosphere bacteria after 28 days (0.2-31 $\times$ 10$^{5}$ CFU/cm root). Furthermore, five of the most-competitive poplar recombinants (e.g., Pb3-1 and Pb5-1 which were identified as Pseudomonas PsK) retained the ability to express TOM for 29 days as 100 $\pm$ 0% of the recombinants detected in the poplar rhizosphere had constitutive expression of TOM.

    • PDF

    Transfer length of 2400 MPa seven-wire 15.2 mm steel strands in high-strength pretensioned prestressed concrete beam

    • Yang, Jun-Mo;Yim, Hong-Jae;Kim, Jin-Kook
      • Smart Structures and Systems
      • /
      • v.17 no.4
      • /
      • pp.577-591
      • /
      • 2016
    • In this study, the transfer length of 2400 MPa, seven-wire high-strength steel strands with a 15.2 mm diameter in pretensioned prestressed concrete (PSC) beams utilizing high strength concrete over 58 MPa at prestress release was evaluated experimentally. 32 specimens, which have the variables of concrete compressive strength, concrete cover depth, and the number of PS strands, were fabricated and corresponding transfer lengths were measured. The strands were released gradually by slowly reducing the pressure in the hydraulic stressing rams. The measured results of transfer length showed that the transfer length decreased as the concrete compressive strength and concrete cover depth increased. The number of strands had a very small effect, and the effect varied with both the concrete cover depth and concrete strength. The results were compared to current design codes and transfer lengths predicted by other researchers. The comparison results showed that the current transfer length prediction models in design codes may be conservatively used for 2400 MPa high-strength strands in high-strength concrete beams exceeding 58 MPa at prestress release.

    Electrical Properties of Sol-Gel Drived Ferroelectric PZT Thin Films dependent on Dry Temperature and Heat Treatment (Sol-gel법으로 제조된 강유전성 PZT박막의 건조온도 및 열처리에 따른 전기적 특성 평가)

    • 배민호;임민수;김명녕;김동규;임기조;김현후
      • Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
      • /
      • 1999.05a
      • /
      • pp.665-668
      • /
      • 1999
    • Thin films of Pb(Zr,Ti)O$_3$ were fabricated by means of the sol-gel spin-coating method and the multi-coating of eight coating numbers. The thin films were dried on the temperature range of 250 ~ 400($^{\circ}C$), whenever the specimens were dried after each coating Processing. The fabricated ferroelectric thin films of lead zirconate titanate(PZT) were treated with the rapid thermal annealing(RTA) at 650($^{\circ}C$),or 3(min), and direct insertion thermal annealing(DITA) at 650($^{\circ}C$), for 30(min). The measured properties of dielectric thin films were following: The good results of dielectric properties were shown by the RTA specimen. The saturation polarization(Ps), remanent polarization(Pr), coercive field (Ec), dielectric constant and dielectric loss factor of the RTA specimen were estimated to be about 27.1[ $\mu$ C/$\textrm{cm}^2$], 13.7[ $\mu$ C/$\textrm{cm}^2$], 55.6(kV/cm), 786 and 6.4(%) respectively.

    • PDF

    (34141) Korea Institute of Science and Technology Information, 245, Daehak-ro, Yuseong-gu, Daejeon
    Copyright (C) KISTI. All Rights Reserved.