• Journal of fish pathology
• /
• v.10 no.1
• /
• pp.45-52
• /
• 1997

A protein-bound polysaccharide preparation, PS-K, isolated from Coriolus versicolor was evaluated for its ability to enhance resistance against Edwardsiella tarda, causal agent of classical edwardsiellosis in tilapia, Oreochromis niloticus. Fish treated with a dose rate of 0.1 mg PS-K $g^{-1}$ body weight were challenged by intraperitoneal injection of E. tarda with different concentrations. Against low burdens of injections($1.2{\times}10^7$ and $1.2{\times}10^8$ cfu/fish), PS-K treated fish did not show any mortality compared to 50% and 100% mortality of control groups, respectively. However there was no increase of resistance against challenge with high concentrations of E. tarda ($1.2{\times}10^9$ and $1.2{\times}10^{10}$cfu /fish) except few days delaying of death. Tilapia injected with PS-K one day after intraperitoneal inoculation of E tarda($1.2{\times}10^7$ cfu/fish) showed 100% survival rate compared to control group of 50% survival rate. The result indicates the potential of PS-K as a prophylactic agent in aquaculture. The increased antibody response in fish received PS-K one week prior to FKC administration suggested the influence of PS-K on the specific humoral immunity and increased resistance against bacterial infection.

• Journal of Korean Society of Environmental Engineers
• /
• v.37 no.3
• /
• pp.145-151
• /
• 2015

In order to remove Sr ions and Cs ions from aqueous solution, PS-zeolite beads were prepared by immobilizing zeolite with polysulfone (PS). The prepared PS-zeolite beads were characterized by SEM, XRD, FT-IR, and TGA. The optimum condition to prepare PS-zeolite beads was 1.25 g of PS content and 2 g of zeolite A. The removal efficiencies of Sr and Cs ions by the PS-zeolite beads increased as the solution pH increases and nearly reached a plateau at pH 4. The PS-zeolite beads prepared in this study showed a remarkably high selectivity for Sr ion and Cs ion under the coexistence of ions such as $Na^+$, $K^+$, $Mg^{2+}$, and $Ca^{2+}$. Zeolite particles detached from the PS-zeolite beads were not observed on this experiments, and also the PS-zeolite beads maintained the morphological structure on a SEM image. The removal efficiencies of Sr ions and Cs ions by PS-zeolite beads were maintained over 90% even after five adsorption-desorption cycles. These results implied that the prepared PS-zeolite beads could be an available adsorbent for the adsorption of Sr and Cs ions. These results suggest that the PS-zeolite can potentially be used as an adsorbent in radioactive ions removal for the treatment of industrial wastewater.

• Korean Journal of Soil Science and Fertilizer
• /
• v.23 no.2
• /
• pp.152-159
• /
• 1990

Four active strains, producing siderophore and antagonizing to soil plant disease fungi, were isolated and identified from the wheat rhizosphere to reduce the injurious effects of continuous cropping and study on the biological control. The obtained results were summerized as follow. 1. Four strains of fluorescent Pseudomonas were isolated from the wheat rhizosphere and identified as Pseudomonas fluorescens Biotype A(Ps-1,2,5) and Biotype B(Ps-3) That strains inhibitied growth of R. solani, F.oxysperum and F. solani in vitro 2. Optical density of pigment was maximum at 410nm. 3. Siderophore production by identified strains was decreased with addition of $Fe^{+3}$, although not decreased with addition of $Fe^{+2}$ 4. Pigment of Ps-1, 2 and 3 strain inhibitied growth of R. slani, F. oxysperum and F. solani but pigment of Ps-5 strain did not inhibitie growth of R. solani 5. Effect of inoculation was in order of Ps-2, 1, 5 and 3 strain through the dark culture method, and effect of Ps-1 and Ps-2 was greater than that of treatment of captan 50ppm.

• Journal of Soil and Groundwater Environment
• /
• v.22 no.2
• /
• pp.17-25
• /
• 2017

The efficiency and mechanism of electrochemical phenol oxidation using persulfate (PS) and nanosized zero-valent iron (NZVI) were investigated. The pseudo-first-order rate constant for phenol removal by the electrochemical/PS/NZVI ($1mA^*cm^{-2}/12$ mM/6 mM) process was $0.81h^{-1}$, which was higher than those of the electrochemical/PS and PS/NZVI processes. The electrochemical/PS/NZVI system removed 1.5 mM phenol while consuming 6.6 mM PS, giving the highest stoichiometric efficiency (0.23) among the tested systems. The enhanced phenol removal rates and efficiencies observed for the electrochemical/PS/NZVI process were attributed to the interactions involving the three components, in which the electric current stimulated PS activation, NZVI depassivation, phenol oxidation, and PS regeneration by anodic or cathodic reactions. The electrochemical/PS/NZVI process effectively removed phenol oxidation products such as hydroquinone and 1,4-benzoquinone. Since the electric current enhances the reactivities of PS and NZVI, process performance can be optimized by effectively manipulating the current.

• Journal of Life Science
• /
• v.18 no.2
• /
• pp.162-166
• /
• 2008

The production of heteropolysaccharide-7 (PS-7) by Beijerinckia indica (B. indica L3) was evaluated in shaker flask culture. The medium optimization was studied using response surface methodology (RSM). A five-level three-factor central composite design was employed to determine the maximum PS-7 yield at optimum levels for whey lactose, glucose and ammonium nitrate contents. The validity of the model could be determined by the regression coefficient, $R^2$. The values of $R^2$ were 0.72, 0.64 and 0.85 in PS-7, DCW and viscosity, respectively. The optimal medium combinations of whey lactose, glucose and ammonium nitrate concentrations on the PS-7 production were whey lactose (2%), glucose (1 %) and ammonium nitrate 5 mM, respectively. The result indicated that PS-7 production was affected significantly by the addition of glucose to whey lactose based on medium and C/N ratio.

• Applied Chemistry for Engineering
• /
• v.19 no.2
• /
• pp.205-208
• /
• 2008

Sulfonated polySEBS and sulfonated PS were synthesized by sulfonation at the aromatic group of polySEBS and PS. Novel sulfonated polySEBS/sulfonated PS blending films for the ion exchange membrane of polymer electrolyte fuel cell were prepared from these sulfonated polymers. The proton conductivities of these blending films were varied in $10^{-2}{\sim}10^{-3}S/cm$ with the blending ratio of sulfonated polySEBS/sulfonated PS. Especially, the film prepared from the addition of the sulfonated PS (0.5 g) in the sulfonated polySEBS (10.0 g) has the best proton conductivity (0.07 S/cm) with ion exchange capacity (0.75 meq/g) and water uptake (25%).

• The Korean Journal of Pesticide Science
• /
• v.3 no.2
• /
• pp.47-53
• /
• 1999

Photosensitizing activities of some photosensitizers (PS) for the artificial diminution of pesticide residues on horticultural crops were investigated. Five fungicides, iprodione, bitertanol, chlorothalonil, myclobutanil, and dichlofluanid were sprayed on apple and cucumber, followed by the application of each selected photosensitizer, and the samples were collected 0, 1, 3, 7, 15 days after the photosensitizer application and analyzed for the residual amounts. Of the 40 photosensitizers tested, six selected on the basis of the eliminating effect of pesticide residues were PS-1 (aromatic ketone), PS-2 (aromatic amine), PS-3 (quinone), PS-4 (inorganic compound), PS-5 (organic acid salt), and PS-6 (semiconductor photocatalyst). The residual amount of iprodione after 15 days of the application of PS-1 was 74% of that of the control. For bitertanol, the residual amount after 15 days of the application of PS-1 accounted for 78% of that of the control. The residual amounts of chlorothalonil after 1 day of the application of PS-1 and PS-2 accounted for 56 and 54% of those of the control, respectively. The residual amounts of iprodione on cucumber after 3 days of the application of the photosensitizers PS-1 and PS-2 were 44 and 67% of those of the untreated control, respectively. For myclobutanil, the residual amount after 15 days of the application of PS-6 accounted for 45% of that of the control. In case of dichlofluanid, the residual amount after 3 days of the application of PS-1 accounted for 44% of that of the control. Based on the results, PS-1 turned out to be the most promising photosensitizer for the accelerated photodegradation of the above fungicides on apple and cucumber.

• Applied Chemistry for Engineering
• /
• v.19 no.4
• /
• pp.421-426
• /
• 2008

Multi-walled carbon nanotube/polystyrene (MWCNT/PS) composites with various MWCNT contents were prepared by using a solution process with an aid of surfactant. Particularly, PS's with 3 different molecular weights (${\bar{M}}_n$ = 101500 g/mole for PS-1, ${\bar{M}}_n$ = 89900 g/mole for PS-2, and ${\bar{M}}_n$ = 85000 g/mole for PS-3) were used in this study. Thermal behavior of these composites was examined by using an oscillator rheometer at $210^{\circ}C$ and $180^{\circ}C$, of above and below the critical flow temperature ($T_{cf}{\sim}195^{\circ}C$) of PS matrix, respectively. The storage and loss modulus, and the complex viscosity of these composites increased with increasing MWCNT content at both temperatures. Largest increases in the frequency-dependent moduli and complex viscosity were observed between 2 wt% and 5 wt% of MWCNTs at $210^{\circ}C$ and $180^{\circ}C$. Only the composite at $210^{\circ}C$ showed the rheological phase transition from a viscous-dominant to an elastic-dominant behavior of the composites at a certain MWCNT content. The MWCNT content at the rheological phase transition of MWCNT/PS composites generally increased with decreasing molecular weight of PS, and was measured to be 3.5 wt% for MWCNT/PS-1, 3.2 wt% for MWCNT/PS-2, and 3.0 wt% for MWCNT/PS-3 composites.

• Asian-Australasian Journal of Animal Sciences
• /
• v.18 no.1
• /
• pp.22-26
• /
• 2005

Four male crossbred beef steers about 2 years old were used in a 4$\{times}$4 Latin square design to investigate the effect of pelleted sugarcane tops on voluntary feed intake, rumen fermentation and digestibility of nutrients. Experimental treatments were; Control (dried-chopped sugarcane tops (DCST)); PS1 (Pelleted sugarcane tops at 1 cm of diameter); PS2 (Pelleted sugarcane tops at 2 cm of diameter) and PS3 (Pelleted sugarcane tops at 3 cm of diameter). Roughage intake and total dry matter intake were 1.59, 1.62, 1.61, 1.63% BW and 2.09, 2.12, 2.11 and 2.13% BW in control, PS1, PS2 and PS3 treatments, respectively (p<0.05). Digestibility of DM, OM and CP were similar in control and PS3 treatment but there was significant difference (p<0.05) between control and PS1, PS2 treatments. Digestibility of neutral detergent fiber (NDF) and acid detergent fiber (ADF) were 52.89, 50.01, 50.05 and 50.56% and 41.91, 39.96, 39.91 and 39.69% in control, PS1, PS2 and PS3, respectively (p<0.05). Total volatile fatty acids concentrations in rumen contents was 67.68, 65.93, 66.15 and 66.67 mM in control, PS1, PS2 and PS3, respectively (p<0.05). Even though, concentrations of acetate and butyrate (%) were significant different (p<0.05) but concentration of propionate (%) was not affected by treatments (p>0.05). Rumen pH, ammonia nitrogen and plasma urea nitrogen were significantly different (p<0.05) among treatments. From this experiment, it was found that dried-chopped sugarcane tops increased digestibility of nutrients whereas pelleted sugarcane tops increased feed intake in beef cattle. However, pelleted sugarcane tops at 3 cm of diameter did similar result in digestibility and rumen parameters with DCST. Therefore, it could be concluded that pelleting sugarcane top is an alternative way to improve the quality of sugarcane tops for use as ruminant roughage source.

• Journal of the Korean Vacuum Society
• /
• v.19 no.2
• /
• pp.81-90
• /
• 2010

We introduce a novel and versatile approach for preparing self-assembled nanoporous multilayered films with antireflective properties. Protonated polystyrene-block-poly (4-vinylpyrine) (PS-b-P4VP) and anionic polystyrene-block-poly (acrylic acid) (PS-b-PAA) block copolymer micelles (BCM) were used as building blocks for the layer-by-layer assembly of BCM multilayer films. BCM film growth is governed by electrostatic and hydrogen-bonding interactions between the oppositely BCMs. Both film porosity and film thickness are dependent upon the charge density of the micelles, with the porosity of the film controlled by the solution pH and the molecular weight (Mw) of the constituents. PS7K-b-P4VP28K/PS2K-b-PAA8K films prepared at pH 4 (for PS7K-b-P4VP28K) and pH 6 (for PS2K-b-PAA8K) are highly nanoporous and antireflective. In contrast, PS7K-b-P4VP28K/PS2K-b-PAA8K films assembled at pH 4/4 show a relatively dense surface morphology due to the decreased charge density of PS2K-b-PAA8K. Films formed from BCMs with increased PS block and decreased hydrophilic block (P4VP or PAA) size (e.g., PS36K-b-P4VP12K/PS16K-b-PAA4K at pH 4/4) were also nanoporous. Furthermore, we demonstrate that the nanostructured electrochemical sensors based on patterning methods show the electrochemical activities. Anionic poly(styrene sulfonate) (PSS) layers were selectively and uniformly deposited onto the catalase (CAT)-coated surface using the micro-contact printing method. The pH-induced charge reversal of catalase can provide the selective deposition of consecutive PE multilayers onto patterned PSS layers by causing the electrostatic repulsion between next PE layer and catalase. Based on this patterning method, the hybrid patterned multilayers composed of platinum nanoparticles (PtNP) and catalase were prepared and then their electrochemical properties were investigated from sensing $H_2O_2$ and NO gas. This study was based on the papers reported by our group. (J. Am. Chem. Soc. 128, 9935 (2006); Adv. Mater. 19, 4364 (2007); Electro. Mater. Lett. 3, 163 (2007)).