• Proceedings of the Korean Geotechical Society Conference
• /
• 2000.03b
• /
• pp.677-684
• /
• 2000

Piezocone test as well as Dilatometer tests are used worldwide to evaluate the engineering properties of clay soils. The common strong point of the two tests is that they can estimate, by the identical test equipment, various properties of soils, which are the unit weight of soils of OCR, K$\sub$o/, undrained shear strength(s$\sub$u/), coefficient of consolidation(c$\sub$h/) and soil classification etc,. A series of the two types of field tests are performed in this study on marine clays with low plasticity at Inchon International Airport construction site to estimate various properties of the soils such as s$\sub$u/, OCR, and c$\sub$h/, which are then compared each other as well as with the results of reference tests. The comparisons show that the way of interpretation is the most critical factor in obtaining confidential results for a certain engineering property for both tests.

• The Bulletin of The Korean Astronomical Society
• /
• v.44 no.2
• /
• pp.77.2-77.2
• /
• 2019

Measurements of supermassive black hole (SMBH) masses are crucial in studying the co-evolution of SMBHs and their host galaxies. Although reverberation mapping is the most accurate method known to date, this requires spectroscopic monitoring over long periods. Thus, the current sample barely reaches three digits. The virial method, on the other hand, uses emission-line and continuum properties from a single spectrum to estimate the SMBH mass; hence the name single-epoch method. The Sloan Digital Sky Survey (SDSS) has observed spectra of almost all quasi-stellar objects (QSOs) discovered so far. Building on previous studies, using the single-epoch method, we estimate the SMBH masses of more than 500,000 QSOs from the SDSS DR14 Quasar Catalog. This increases the mass-estimated SMBH sample almost by a factor of two, and especially more for the low-mass regime, which was the main target of SDSS-IV (eBOSS).

• Journal of Communications and Networks
• /
• v.12 no.5
• /
• pp.499-509
• /
• 2010

A plethora of transmission control protocol (TCP) congestion control algorithms have been devoted to achieving the ultimate goal of high link utilization and fair bandwidth sharing in high bandwidth-delay product (HBDP) networks. We present a new insight into the TCP congestion control problem; in particular an end-to-end delay-based approach for an HBDP network. Our main focus is to design an end-to-end mechanism that can achieve the goal without the assistance of any network feedback. Without a router's aid in notifying the network load factor of a bottleneck link, we utilize goodput and throughput values in order to estimate the load factor. The obtained load factor affects the congestion window adjustment. The new protocol, which is called TCP-goodput and throughput (GT), adopts the carefully designed inversely-proportional increase multiplicative decrease window control policy. Our protocol is stable and efficient regardless of the link capacity, the number of flows, and the round-trip delay. Simulation results show that TCP-GT achieves high utilization, good fairness, small standing queue size, and no packet loss in an HBDP environment.

• Journal of Korean Society for Quality Management
• /
• v.41 no.4
• /
• pp.659-672
• /
• 2013

Purpose: The purpose of this study was to estimate life time of halogen lamps and acceleration factors using accelerated life test. Methods: Voltage was selected as an accelerating variable through the technical review about failure mechanism. The test was performed at 14.5V, 15.5V and 16.5 for 4,471 hours. It was assumed that the lifetime of Halogen lamps follow Weibull distribution and the inverse power life-stress relationship models. Results: Mean lifetimes of pin and screw types were 19,477 hours and 6,056 hours, respectively. In addition, acceleration factor of two items are calculated as 4.8 and 2.2 based on 15.5V, respectively. Conclusion: The life-stress relationship, acceleration factor, and MTTF at design condition are estimated by analyzing the accelerated life test data. These results suggest that voltage was very important factor to accelerate life time in the case of halogen lamps and the life time of pin type is three times longer than screw type lamps.

• Nuclear Engineering and Technology
• /
• v.21 no.4
• /
• pp.321-331
• /
• 1989

A bench scale incineration process for the burnable radwaste has been constructed and operated at KAERI as a self-surpported development of incineration technology. The purposes of operating the process are to get experience in incineration, to analyze the characteristics of combustion and to test the performance of off-gas treatment units. Simulated paper and polyethylene wastes were incinerated. Volume reduction ratio and decontamination factor of the process have been determined to observe the economical efficiency and operational capability of the process. A methodology to estimate the acceptance limit of specific activity to an incineration facility by using a decontamination factor and to calculate the volume reduction ratio of the facility is introduced. The acceptance criteria for different radionuclides in the combustible waste at the bench scale incineration process are suggested using this methodology.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2009.03a
• /
• pp.888-895
• /
• 2009

Compaction is a process of increasing soil density using physical energy. It is intended to improve the strength and stiffness of soil. In embankment, degree of compaction affects the construction time, money, also method of soil improvement. In large scale embankment project, difficulties of embankment should change due to uncertainty of settlement. So it is very important to predict the final settlement and factor of safety induced by embankment. In many construction site, there are primarily design of high embankment using in-situ soil. Therefore numerical analyses are necessary for valid evaluation of the settlement prediction. But due to the construction cost and schedule, there were lacking in properties of soil and also limited number of in-situ test were performed. So we proposed the method that can easily estimate the proper soil parameters and suggest the proper method of numerical analysis. From this, two-dimensional finite-difference numerical analysis was conducted to investigate the settlement and factor of safety induced by embankment with various case of compaction rate and embankment height.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.4
• /
• pp.2285-2294
• /
• 2014

Stoltz's AQP is a tool to estimate the level of adversity. The purpose of study is to test the reliability and validity of AQP. The participants were 297 nurses of tertiary hospital in Korea. Data were collected from Aug. to Oct. 2013. Resilience Scale was used as criterion of AQP. Cronbach's alpha test, item total correlation, exploratory factor, correlation analysis, and ANOVA test were used. In result, factor analysis was accounted for four factors explaining 56.256% of total variance and corresponding factors were factor 1 (Control, 10.7%), factor 2 (Ownership, 13.7%), factor 3(Reach, 17.4%), factor 4 (Endurance, 14.9%). The internal consistency was acceptable (Cronbach's alpha=.84). Four factors were positively correlated with RS. AQP is a reliable and valid instrument to measure for adversity quotient in Korean nurse.

• Research in Community and Public Health Nursing
• /
• v.28 no.4
• /
• pp.482-493
• /
• 2017

Purpose: This study aims to investigate the individual and environmental factors related to emotional/behavioral problems to early adolescence in Korea by applying multilevel modeling. Methods: From the database of the 2014 Korean Child and Youth Panel Survey (KCYPS), the researchers selected 1,977 adolescents who are in the second year of middle school. Multilevel model analysis was performed to estimate the impact of relevant factors at the individual and environmental levels. Results: At the individual level, the significant factors associated with emotional/behavioral problems included BMI and study tendency in boys, and drinking, study tendency and economic levels in girls. At the environmental level, the significant factor associated with emotional/behavioral problems included relationship with the teacher. Conclusion: The emotional/behavioral problems of early adolescence are influenced not only by the individual factors but also by the environment factor. Therefore, the environment surrounding the adolescents should also be considered to prevent emotional/behavioral problems.

• Journal of the Korean Data and Information Science Society
• /
• v.7 no.1
• /
• pp.37-46
• /
• 1996

In this paper, we introduce the goodness of fit test procedure for lifetime distribution using step stress accelerated lifetime data. Using the nonpapametric estimate of acceleration factor, we prove the strong consistence of empirical distribution function under null hypothesis. The critical vailues of Kolmogorov-Smirnov, Anderson-Darling, Cramer-von Mises statistics are computed when the lifetime distibution is assumed to be exponential and Weibull. The power of test statistics are compared through Monte-Cairo simulation study.

• Journal of Korean Society for Atmospheric Environment
• /
• v.3 no.1
• /
• pp.55-64
• /
• 1987

Actual driving pattern of each motor vehicle type was measured and analyzed in Seoul area and vehicle emission rate was measured and traffic data were used to estimate vehicular emission factor and motor vehicle-related air pollutant emission. The analysis of contribution ratio of each vehicle type showed that LPG taxi's took 38.1% of total vehicular CO, gasoline passenger cars 37.5%, therefore, these cars are major sources of CO, gasoline passenger cars took 45.4% of total vehicular HC, motorcycles 25.3%, LPG taxi's 16.2%, so motorcycles can be said to play an important role in HC emission. For NOx, buses and trucks were thought to be major sources as buses took 36.8% and truck 26.4%. Diesel vehicles, on the other hand, took most $SO_2$ and particulate matter emission. Total emission from motor vehicles in Seoul was estimated to be 547 t/day of CO, 68t/day of HC, 163t/day of NOx, 18t/day of $SO_2$ and 19t/day of paticulate matter.