• Journal of Power Electronics
• /
• 제16권3호
• /
• pp.1122-1130
• /
• 2016

This paper presents a novel approach for achieving both a tight DC voltage regulation and a power factor control by applying the Reaching Law Sliding Mode Control (RL-SMC) and the conventional Sliding Mode Control (SMC). Applying these strategies on a matrix rectifier (MR) can achieve a unity grid side power factor when the DC load changes widely and it can provide a ripple-free output voltage that is easily affected by distortions of the three-phase ac voltage supply. Furthermore, by employing the reaching law on the SMC can solve the chatting problem of the sliding motion. Comparative Matlab simulations and experimental verifications for these strategies have been presented and discussed in this paper. The results show that by applying the SMC and RL-SMC on a MR can achieve a unity grid side power factor and a regulated ripple-free DC output.

• 산경연구논집
• /
• 제10권5호
• /
• pp.7-20
• /
• 2019

Purpose - This study provides appropriate procedures for EFA to help researchers conduct empirical studies by using PLS-SEM. Research design, data, and methodology - This study addresses the absolute and relative sample size criteria, sampling adequacy, factor extraction models, factor rotation methods, the criterion for the number of factors to retain, interpretation of results, and reporting information. Results - The factor analysis procedure for PLS-SEM consists of the following five stages. First, it is important to look at whether both the Bartlett test of sphericity and the KMO MSA meet the qualitative criteria. Second, PAF is a better choice of methodology. Third, an oblique technique is a suitable method for PLS-SEM. Fourth, a combined approach is strongly recommended to factor retention. PA should be used at the onset. Next, it is recommended using the K1 criterion. In addition, it is necessary to extract factors that increase the total variance explanatory power through the PVA-FS. Finally, it is appropriate to select an item with a factor loading into 0.5 or higher and a communality of 0.5. Conclusions - It is expected that the accurate factor analysis processed for PLS-SEM as previously presented will help us extract more precise factors of the structural model.

• 한국의류학회지
• /
• 제35권6호
• /
• pp.635-645
• /
• 2011

This study explores the differences in product evaluation and approach behaviors as well as the effects of product evaluation on approach behaviors of utilitarian and hedonic products in on-line and off-line settings. A total of 332 subjects participated in the experiments to assess product evaluation and approach behaviors for utilitarian and hedonic clothing products in on-line and off-line settings. The results show that even though the same stimulus was presented, consumers' product evaluation of utilitarian clothing (i.e., t-shirts) was higher in the off-line setting than in the on-line setting while the approach behavior of hedonic clothing was better in the on-line setting than in the off-line setting. In addition, color was a crucial factor generating positive approach behaviors for utilitarian clothing while style and quality were core factors influencing the approach behaviors of hedonic products in an on-line setting. There was no consistency in the results of the important factors affecting approach behaviors of utilitarian and hedonic clothing in an off-line setting. The conclusion suggests implications for marketing based upon the results of this study.

• 산업경영시스템학회지
• /
• 제39권4호
• /
• pp.7-14
• /
• 2016

Unlike most researches that focus on single manufacturer or single buyer, this research studies the cooperation policy for two participants of supply chain such as single vendor and single buyer. Especially, this paper deals with single vendor-single buyer integrated-production inventory problem. If the buyer orders products, then the vendor will start to make products and then the products will be shipped from the vendor to the buyer many times. The buyer is supposed to order again when the buyer's inventory level hits reorder point during the last shipment and this cycle keeps repeated. The buyer uses continuous review inventory policy and customer's demand is assumed to be probabilistic. The contribution of this paper is to present a mixed approach and derive its cost function. The existing policy assumes that the size of shipping batch from single vendor to single buyer is increasing, called Type 1, or constant, called Type 2. In mixed approach, the size of shipping batch is increasing at the beginning part of the cycle, and then its size is constant at the ending part of the cycle. The number of shipping for Type 1 and Type 2 in a cycle in mixed approach is determined to minimize total cost. The relationship between parameters, for example, the holding cost per product, the set up cost per order, and the shortage cost per item and decision variables such as order quantity, safety factor, the number of shipments, and shipment increasing factor is figured out via sensitivity analysis. Finally, it is statistically proved that the mixed approach is superior to the existing approaches.

• Wind and Structures
• /
• 제21권6호
• /
• pp.609-623
• /
• 2015

Seismic reliability analysis of a jacket-type support structure for an offshore wind turbine was performed. When defining the limit state function by using the dynamic response of the support structure, a number of dynamic calculations must be performed in a First-Order Reliability Method (FORM). That means analysis costs become too high. In this paper, a new reliability analysis approach using a static response is used. The dynamic effect of the response is considered by introducing a new parameter called the Peak Response Factor (PRF). The probability distribution of PRF can be estimated by using the peak value in the dynamic response. The probability distribution of the PRF was obtained by analyzing dynamic responses during a set of ground motions. A numerical example is presented to compare the proposed approach with the conventional static response-based approach.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 A
• /
• pp.270-272
• /
• 2001

This paper deals with the analytical approach for the reliability assessment in radially operated distribution systems. The approach can estimate the expected reliability performance of distribution systems by a direct assessment of the configuration of the systems using the reliability indexes such as NDP(Non-Delivery Power) and NDE(Non-Delivery Energy). The indexes can consider the number and configuration of the load, but can not consider the characteristics of the load which is the one of the most important factor in the investment cost for the distribution systems. Therefore, This paper presents the new indexes considering the expected interruption cost for the load section and shows the effectiveness by simulating at the model systems.

• 한국태양에너지학회 논문집
• /
• 제36권6호
• /
• pp.13-24
• /
• 2016

The government introduced a mandatory installation system of new & renewable energy for public building to meet the target of greenhouse gas reduction and also suggest a correction factor for new renewable energy to expand the installation of various new & renewable energy systems. The introduction of correction factors, however, was followed by the reduction of installation size of new & renewable energy sources. Assuming that it was caused by a correction factor for each new renewable energy source calculated by the initial costs, this study proposed a new correction factor approach based on payback periods to reflect the technology element in the calculation process of correction factors additionally. The application results of new correction factors show that it was possible to do complex calculations including the economic and technological aspects to select a new & renewable energy system and that the installation size was also enlarged.

• Journal of Genetic Medicine
• /
• 제13권2호
• /
• pp.89-94
• /
• 2016

Purpose: Molecular genetic analysis is the main approach used for prenatal diagnosis of hemophilia A and B. However, in certain cases, such analysis is uninformative. In such situations, direct measurement of fetal coagulation factor levels is still the best option, and it may be the only option in some cases. This study was conducted to determine the normal ranges of mid-trimester cord blood factor VIII (FVIII) and IX (FIX) in a Korean population. Materials and Methods: Twenty-six FVIII samples and 29 FIX samples were assayed in fetal cord blood acquired by ultrasound-guided cordocentesis. Sampling was conducted during gestational ages of 19-24 weeks. Results: The mean and standard deviations for FVIII and FIX activity were $45.5{\pm}30.5%$ and $19.9{\pm}12.2%$, respectively. Ranges for FVIII and FIX were 1.5-125.0% and 6.0-52.0%, respectively. Conclusion: Our study revealed the normal ranges and lowest level of factor VIII and factor IX in non-affected normal fetus by fetal cord blood sampling during the mid-trimester in a Korea population. The factor assay of the fetal cord blood is invasive but feasible and provides important basic data related to hemophilia.

• 한국의류산업학회지
• /
• 제15권1호
• /
• pp.65-72
• /
• 2013

This study utilizes a S-O-R model to investigate the effects of apparel product presentations using a 3D avatar model in Internet fashion malls for pleasure(emotional state) and approach behavior. We chose a 3D avatar model to present a fashion product in this study. The model walked for about one minute on stage; subsequently, respondents completed a questionnaire after they viewed it. The questionnaire consists of telepresence, pleasure and approach behavior. Respondents are limited to females 20s and 30s years old who have purchased fashion products in an Internet mall and are highly interested in fashion products. A total of 226 samples were used for the final analysis. Cronbach's alpha, correlation analysis, confirmatory factor analysis, and structural equation modeling were utilized in this study. The results are as follows. First, telepresence has a significant influence on pleasure; subsequently, pleasure influenced consumer approach behavior. Second, telepresence positively influenced the approach behavior (directly and indirectly). This verified the effectiveness of a 3D avatar model using S-O-R. A 3D avatar model can be a strategic alternative in the fiercely competitive Internet shopping sector.

• 정신신체의학
• /
• 제3권1호
• /
• pp.81-90
• /
• 1995

It is essential in evaluating the chronic pain patients that the physician obtain a multiple causative factors including organic, psychological, and socioenvironmental factors. Though these multiple factors are involved in the development of chronic pain syndrome, chronic pain syndrome is not only the sum of the interaction of all of these factors, but is also influenced by the sequelae of chronic pain, which again are organic, psychological, and socioenvironmental in nature. Therefore a systemic approach is probably the best way to asses the role of all of these factors. Furthermore, this approach can provide a framework for understanding chronic pain syndrome, for assessing chronic pain syndrome, for the rational management of chronic pain syndrome, and for the development and testing of hypotheses.