• 수산해양교육연구
• /
• 제29권3호
• /
• pp.711-718
• /
• 2017

This study identified application range of SPS Code(Special Purpose Ship Code) applied to fishery training ship in Korea, and proposed counterplan for port state control. The latest contents of relevant convention was verified, used APCIS of Tokyo MOU and EQASIS provided by EU to analyze the current condition and deficiencies of port state control of fishery training ship. As the result, the SPS code equal to passenger ship and cargo ship of SOLAS convention should be satisfied with fishery training ship, and must follow ISPS Code. As for the result of record of port state control, it was confirmed that 8 fishery training ships were inspected 76 times and pointed out with 411 deficiencies in Tokyo MOU nation. 75% of deficiencies were related to SOLAS convention, and 71 times of inspections were conducted in Japan. Because it is not free from the fishery training ship, there is a need for active corresponding and preparation by enhancing local cooperative system and sharing the Internet inspection background, and need to develop and implement in-depth internship program to improve port state control counter plan for the trainees.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제6권2호
• /
• pp.347-360
• /
• 2014

The auto-berthing of a ship requires excellent control for safe accomplishment. Crabbing, which is the pure sway motion of a ship without surge velocity, can be used for this purpose. Crabbing is induced by a peculiar operation procedure known as the push-pull mode. When a ship is in the push-pull mode, an interacting force is induced by complex turbulent flow around the ship generated by the propellers and side thrusters. In this paper, three degrees of freedom equations of the motions of crabbing are derived. The equations are used to apply the adaptive backstepping control method to the auto-berthing controller of a cruise ship. The controller is capable of handling the system non-linearity and uncertainty of the berthing process. A control allocation algorithm for a ship equipped with two propellers and two side thrusters is also developed, the performance of which is validated by simulation of auto-berthing.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2002년도 춘계학술대회 논문집
• /
• pp.204-208
• /
• 2002

Mooring is the operation of securing a ship to a wharf or quay by means of rapes or chains. A. moored ship need not necessarily be truly stationary. It may be free to rise and fall with the tick or the loading and unloading of cargo or to oscillate in response to the action of the environmental forces. In this respect a moored ship is restricted to a limited amount of movement within well-defined bounds. This study is intended to analyze the tension of mooring lines by a FEM program, as the current velocities and working directions are varied. The motion of a berthed ship is studied concerning with the wave periods and the direction. Also the behavior of the modeled vessel are investigated for a berthed condition.

• 수산해양교육연구
• /
• 제29권1호
• /
• pp.158-168
• /
• 2017

The aim of this study is to propose the plausibility of Ship-repair industry brand in the global market. It has been argued that it is necessary to secure the identity of company because of the expansion of international market in the age of globalization. Authors of this paper have considered that the brand is a solution for global ship-repair industry's development in Busan region with focusing on the 5 elements (Salience, Imagery, Performance, Feeling, and Judgments) of Keller's brand equity block except Resonance. As a result, we presented the roles of company for securing the brand equity in ship-repair industry comparing with the elements of Keller's brand equity block. and implied the plausibility of global ship-repair industry's development. Especially, Securing the licences and certifications related to ship-repair industry is very important thing about the brand equity.

• 수산해양기술연구
• /
• 제40권1호
• /
• pp.73-77
• /
• 2004

It is well known that the hydrodynamic interaction forces between ship and bank wall affect ship manoeuvring motions. In this paper, the calculation method based on the slender body theory for estimation of the hydrodynamic interaction forces between ship and bank wall is investigated. The numerical simulations on hydrodynamic interaction force acting on a ship in the proximity of bank wall are carried out by using this theoretical method. The theoretical method used in this paper will be useful for practical prediction of ship manoeuvrability at the initial stage of design, for discussion of marine traffic control system and for automatic control system of ship in confined waterways.

• Journal of Advanced Research in Ocean Engineering
• /
• 제4권3호
• /
• pp.135-145
• /
• 2018

This paper deals with the added resistance of a ship in waves using computational fluid dynamics (CFD). The ship added resistance is one of the key considerations in the design of energy-efficient ship. In this study, the added resistance of a LNG carrier in head waves is computed using a CFD code to consider the nonlinearity and the viscous effects. The unsteady Reynolds Averaged Navier-Stokes equation (RANS) is numerically solved and the volume of fluid (VOF) approach is used to simulate the free surface flows. The length of incident wave varies from half the ship length to twice the ship length. To investigate the nonlinearity effect, both the linear wave condition and the nonlinear wave condition are considered. The heave and pitch motions are calculated along with the added resistance, and the wave contours are obtained. Grid convergence test is conducted thoroughly to achieve the converged motion and resistance values. The calculated results are compared and validated with experimental data.

• Journal of Ship and Ocean Technology
• /
• 제8권4호
• /
• pp.17-25
• /
• 2004

Hull girder stress monitoring system for container ship uses four long-base-strain-gages at mid-ship to monitor the resultant stresses and the applied moment components of horizontal, vertical and torsional moments. The bending moments are estimated by using the conventional strain-moment relations, however, the torsional moment related to the warping strain requires the assumption of the shape of torsional moments over the hull girder. Though this shape could be a sine function with an adequate period, it largely depends upon certain empirical formulas. This paper introduces additional four long-base-strain-gages at mid-ship to derive the longitudinal slope of the warping strain because this slope is directly related to the torsional moment by Bi-moment concept. An open-channel-type cantilever beam has been selected as a simplified model for container ship and the result has proved that the suggested concepts can estimate the torsional component accurately. Finally this method can become reliable technique to derive all external moments in hull girder stress monitoring system for container ships.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제9권2호
• /
• pp.149-159
• /
• 2017

In this study, the numerical investigation of ship motions and added resistance at constant forward velocity of KVLCC2 model is presented. Finite volume CFD code is used to calculate three dimensional, incompressible, unsteady RANS equations. Numerical computations show that reliable numerical results can be obtained in head waves. In the numerical analyses, body attached mesh method is used to simulate the ship motions. Free surface is simulated by using VOF method. The relationship between the turbulence viscosity and the velocities are obtained through the standard ${\kappa}-{\varepsilon}$ turbulence model. The numerical results are examined in terms of ship resistance, ship motions and added resistance. The validation studies are carried out by comparing the present results obtained for the KVLCC2 hull from the literature. It is shown that, ship resistance, pitch and heave motions in regular head waves can be estimated accurately, although, added resistance can be predicted with some error.

• 한국항해항만학회지
• /
• 제28권2호
• /
• pp.113-119
• /
• 2004

Ships' collision accident has often occurred in congested waterways or in harbour areas. To examine the cause of collision accident may be necessary to prevention against another similar one. We discuss the construction of ship-manoeuvring-simulator system used for reproducing ships' collision phenomenon The system consists of one simulator bridge for own ship and two control consoles for own ship and target ship. Own ship and target ship are linked each other, and are simultaneously manoeuvred in simulator bridge or at control console respectively. And a simulator experiment for reproducing ships' collision phenomenon and for examining the cause of accident is carried out. Through the present case study, we find out that the constructed simulator system is very useful for reproducing ships' collision phenomenon and for examining the cause of accident.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2006년도 International Symposium on GPS/GNSS Vol.1
• /
• pp.95-100
• /
• 2006

A ship collision avoidance system is developed to control the avoidance action of ship actually and properly in wind forces. The 4-DOF maneuvering equations of motion ar derived to catty out the simulation of the motion of a ship, and the wind forces are considered as the external forces in the simulation. This study suggests a new avoidance system that could include the ship's maneuvering characteristics.