• Korean journal of food and cookery science
• /
• v.22 no.4 s.94
• /
• pp.552-562
• /
• 2006

The environment which surrounds us such as climates, technology change rapidly. Forecasting the future of food by reviewing the subject at the moment would be meaningful, because we could understand the impact of new technology, set the new goal and create the future by speaking out on issues of our concern and by our choices. There are two points of view on our future, one is pessimistic view due to the food and the water shortage, as well as environmental contamination. Another is optimistic view mainly because of innovative technologies. Biotechnology would enable to develope the personalized food using nutrigenomics, nutrigenetics, and nutraceuticals. Nanotechnology and shelf-life extension techniques would contribute great deal to the development of the future food. Consumer's concern for the health and the wellness as well as palatability would affect the development of future food so that the involvment of food cookery scientists are more important to meet the consumer's needs and trends.

• Structural Engineering and Mechanics
• /
• v.13 no.4
• /
• pp.429-436
• /
• 2002

The current work presents an analysis algorithm for the modal analysis for the dynamic behaviors of offshore structures with concepts of mass perturbation influence term. The mass perturbation concept by using the term, presented in this paper offers an efficient solution procedure for dynamical response problems of offshore structures. The basis of the proposed method is the mass perturbation influence concepts associated with natural frequencies and mode shapes and mass properties of the given structure. The mathematical formulation of the mass perturbation influence method is described. New solution procedures for dynamics analysis are developed, followed by illustrative example problems, which deal with the effectiveness of the new solution procedures for the dynamic analysis of offshore structures. The solution procedures presented herein is compact and computationally simple.

• Journal of Power System Engineering
• /
• v.12 no.6
• /
• pp.56-63
• /
• 2008

Many advanced nations have been developing the next generation logistic systems to effectively deal with gradually increased logistic flows over the world. Particularly, dual mode trailer(DMT) systems are significantly focused as a new alternative transportation which basically provides integrating of the land and railroad services. This paper presents new driving mechanism for DMT systems using the hydraulic pressure cylinder systems. Such is mechanically composed of supporting and rotating parts independently, which are mostly important for whole system performance. We analyze feasible operational problem occurred in driving mechanism from the conventional DMT systems and compare our proposed deign specification with the Modalohr DMT system to demonstrate its reliability and practicability.

• IE interfaces
• /
• v.21 no.2
• /
• pp.209-220
• /
• 2008

Recently, innovative medical services are fast emerging, which include customized medical services based on bio-informatics, composition of cure and well-being exploiting ubiquitous technology, hospital supply chain management using RFID, and so forth. However, conventional approaches for new service development hardly give us systematic model to analyze and produce creative medical services. Because most of them are static and concentrate on microscopic tools or techniques. Thus, it is highly desirable to suggest an integrative framework to organize the whole transformation process from technology to medical service. The objective of this study is to propose a medical service engineering model based on the dynamic innovation theory. The proposed model contains objectives of service system, strategies of hospital, stages, activities required to deal with medical service life cycle, which incorporates the acquisition of new technology, transformation to the product, penetration into market, and adoption of consumers. In addition, the usefulness and applicability of the newly proposed model are provided using catholic medical center example.

• Journal of Institute of Control, Robotics and Systems
• /
• v.6 no.9
• /
• pp.786-795
• /
• 2000

In this paper, a new impedance force control method for deburring and polishing process is proposed. The proposed method is robust to deal with unknown environment stiffness as unknown well as environment location. An adaptive technique is used to minimize the force error occurred due to unknown environment surface profile. A robust position control algorithm based on time-delayed information is used to cancel out uncertainties in robot dynamics. A three link robot manipulator is used to demonstrate performances of the proposed control on deburring and polishing tasks. Stability analysis for the adaptive control is presented and its results are confirmed by simulations.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.13 no.2
• /
• pp.195-195
• /
• 1999

This paper is Proposed a new method to deal with the optimized auto-tuning for the PID controller which is used to the process-control in various fields. First of all, in this method, 1st order delay system with dead time which is modelled from the unit step response of the system is Pade-approximated, then initial values are determined by the Ziegler-Nickels method. So we can find the parameters of PID controller so as to minimize the fuzzy criterion function which includes the maximum overshoot, damping ratio, rising time and settling time. Finally, after studying the parameters of PID controller by Backpropagation of Neural-Network, when we give new K, L, T values to Neural-Network, the optimized parameter of PID controller is found by Neural-Network Program.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.21 no.45
• /
• pp.237-246
• /
• 1998

In most statistical process control(SPC), control charts are used in which samples are taken and a suitable statistic is determined and plotted. In these control charts, control limits, ${\mu}{\pm}textsc{k{\sigma}}$, from which a decision is made are mostly ${\mu}{\pm}3{\sigma}$ and current literature in control charts are mainly concerned with detecting a shift in the mean. Therefore, when $\sigma$ is increased considerably after a long time, using control limits set at the first time causes a great deal of economic loss. In this paper the solutions to determine new control limits which maximizes the profit per unit produced and reduce $\sigma$ to economically optimal level for a certain cost when $\sigma$ is increased due to process deterioration are proposed. By applying new control limits, $\alpha$ error decreases considerably compared to apply initial control limits when $\sigma$ is increased due to process deterioration. Therefore, false alarm investigation cost drops down to the level of initial a error. And also this solution provides useful information regarding replacement of a process when the process is reviewed regularly.

• Korean Institute of Interior Design Journal
• /
• v.13 no.4
• /
• pp.92-101
• /
• 2004

A rational and logical sense of design often found in modernism(including minimalism) sometime deal with the criticism that such characteristics which derived from those of modernism, lack emotion31 qualities(arises from human feelings). It consequently took them to adopt traditional designs in the past, creating such conditions that constantly escapes from‘present’ one and back to the‘new’. This mode develops a trend in current interior design which decorative elements such as art work: traditional arts, folk crafts, flowers and green are much evident. Thus, using many decorative elements of the past(what was once banned since modernism), brings up the interesting point of view that needs to be discussed a new decorative trend if today's interior design. It will approach by comparing significances of past decorative expressions with present through which investigation, will show a better understanding of recent characteristics in interior designing, a.k.a, a current trend since minimalism, embracing important qualities of culture, ecology and people - against today's less-inspired, standardizing spaces.

• Journal of the Korean Professional Engineers Association
• /
• v.27 no.2
• /
• pp.42-54
• /
• 1994

Nowadays communication network is steadily changing from a main body of telephone to a network which is creating new services such as multimedia etc. Jhis article introduces a bud of new service and new network which are able to sustain the above service. Including Korea, world advanced countries have been digitatizing their network with N-ISDN (narrowband ISDN) by e.g. 64K b/s and 1.5M b/s. New service by N-ISDN are extraordinary, though it can not solve all kinds of services. To solve these problems, a solving platform should be constituted. B-ISDN(broadband ISDN), as a platform has to be built to deal with almost all uinds of services, whatever the communication speed, communication mode or communication quality may be. Korea Telecommunication Authority(KTA) opened the narrowband ISDN(N-ISDN) at the end of 1993. This was one step previous opening of the broadband ISDN(B-ISDN) service scheduled to be rendered in 2001. B-ISDN, receiving and transmitting by far more information with high speed than the N-NSDN does, is one of G-7 Progects which the Korean government is driving foreward to raise the national scientific power to seven advan ced countries. This is also linked with an extremely high speed information network scheduled to be built by the Ministry of Communications in 2015.

• Structural Engineering and Mechanics
• /
• v.42 no.2
• /
• pp.191-210
• /
• 2012

The Force Density Method (FDM) is a well known and extremely versatile tool in form finding of cable nets. In its linear formulation such method makes it possible to find all the possible equilibrium configurations of a net of cables having a certain given connectivity and given boundary conditions on the nodes. Each singular configuration corresponds to an assumed force density distribution. Its improvement as Non-Linear Force Density Method (NLFDM) introduces the possibility of imposing assigned relative distances among the nodes, the tensile level in the elements and/or their initial undeformed length. In this paper an Extended Force Density Method (EFDM) is proposed, which makes it possible to set conditions in terms of given fixed nodal reactions or, in other words, to fix the positions of a certain number of nodes and, at the same time, to impose the intensity of the reaction force. Through such extension, the (EFDM) enables us to deal with form findings problems of cable nets subjected to given constraints and, in particular, with mixed structures, made of cables and struts. The efficiency and the robustness of method are assessed through comparisons with other form finding techniques in dealing with characteristic applications to the prestress design of cable systems. As a further extension, the EFDM is applied to structures having some parts not yet geometrically defined, as can happen in designing new creative forms.