• Journal of Korean Library and Information Science Society
• /
• v.44 no.1
• /
• pp.27-47
• /
• 2013

This study investigated the classification performance of a kNN classifier using the feature selection methods based on document frequency(DF) and collection frequency(CF). The results of the experiments, which used HKIB-20000 data, were as follows. First, the feature selection methods that used high-frequency terms and removed low-frequency terms by the CF criterion achieved better classification performance than those using the DF criterion. Second, neither DF nor CF methods performed well when low-frequency terms were selected first in the feature selection process. Last, combining CF and DF criteria did not result in better classification performance than using the single feature selection criterion of DF or CF.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07b
• /
• pp.1163-1167
• /
• 2003

As a PD classification method, statistical distribution parameters have been used during several ten years. And this parameters are recently finger print method, NN(Neural Network) and etc. So in this paper we studied finger print method and NN with BP(Back propagation) learning algorithm using the statistical distribution parameter, and compared with two method as classification method. As a result of comparison, classification of NN is more good result than Finger print method in respect to calculation speed, visible effect and simplicity. So, NN has more advantage as a tool for PD classification.

• International Journal of Control, Automation, and Systems
• /
• v.4 no.3
• /
• pp.308-317
• /
• 2006

To control the tip position of a flexible-link manipulator, a neural network (NN) controller is proposed in this paper. The dynamics error used to construct NN controller is derived based on output redefinition approach. Without the filtered tracking error, the proposed NN controller can still guarantee the closed-loop system uniformly asymptotically stable as well as NN weights bounded. Furthermore, the tracking error of desired trajectory can converge to zero with the proposed controller. For comparison an NN controller with filtered tracking error is also designed for the flexible-link manipulator. Finally, simulation studies are carried out to verify the theoretic results.

• Journal of the Korean Wood Science and Technology
• /
• v.47 no.2
• /
• pp.229-238
• /
• 2019

Various wood defects occur during tree growing or wood processing. Thus, to use wood practically, it is necessary to objectively assess their quality based on the usage requirement by accurately classifying their defects. However, manual visual grading and species classification may result in differences due to subjective decisions; therefore, computer-vision-based image analysis is required for the objective evaluation of wood quality and the speeding up of wood production. In this study, the SIFT+k-NN and CNN models were used to implement a model that automatically classifies knots and analyze its accuracy. Toward this end, a total of 1,172 knot images in various shapes from five domestic conifers were used for learning and validation. For the SIFT+k-NN model, SIFT technology was used to extract properties from the knot images and k-NN was used for the classification, resulting in the classification with an accuracy of up to 60.53% when k-index was 17. The CNN model comprised 8 convolution layers and 3 hidden layers, and its maximum accuracy was 88.09% after 1205 epoch, which was higher than that of the SIFT+k-NN model. Moreover, if there is a large difference in the number of images by knot types, the SIFT+k-NN tended to show a learning biased toward the knot type with a higher number of images, whereas the CNN model did not show a drastic bias regardless of the difference in the number of images. Therefore, the CNN model showed better performance in knot classification. It is determined that the wood knot classification by the CNN model will show a sufficient accuracy in its practical applicability.

• Journal of Oriental Neuropsychiatry
• /
• v.19 no.2
• /
• pp.111-122
• /
• 2008

Objective : Herb medicines are potential sources of useful edible and medicinal plants. They are used as a drug because of their various biological activities such as immunomodulatory, antiviral, and antitumor functions. Nelumbo nucifera have been applied in Chinese herbal prescriptions to improve tissue inflammation. However, it has not been elucidated on the effect of the flower of Nelumbo nucifera in cells. Method : In the present study, to examine the effect of that on glioma cells, U87, the essential oil was extracted from the flower of Nelumbo nucifera (NN essential oil). U87 cells were exposed to different concentrations of 2-40 ug/ml of NN essential oil in ethanol. Cell viability was measured by MTT assay at 24 h. To find out the intracellular target signal molecule(s) for this antiproliferative activity of NN essential oil, phosphorylation of Akt, ERM, MAPK or p38 proteins were examined by Western blot analysis. To study long term effect of NN essential oil in U87 cells, the image of cells treated with NN essential oil for 4 days were obtained. Results and Conclusion : NN essential oil was shown to exhibit antitumor activity in glioma cells, at a broad range of concentrations of 10-40 ug/ml. The phosphorylation of Akt and Endoplasmic Reticulum Matrix (ERM) proteins which known to be involved in the cell death, were gradually decreased to 2 hours after addition 20 ug/ml of NN essential oil. However, the phosphorylation of mitogen-activated protein (MAPK) and p38 was found to increase in NN essential oil treated cells. NN essential oil treated cells showed decreased glioma cell number. These results provide a possible NN essential oil-induced inhibitory signal for tumor cell proliferation that is initiated by the decrease in Akt activity. Moreover, it is likely that the activation of p38 is required for the NN essential oil-induced inhibition of tumor proliferation.

• Journal of Korean Society for Geospatial Information Science
• /
• v.19 no.2
• /
• pp.39-48
• /
• 2011

Global warming causes the climate change and makes severe damage to ecosystem and civilization Carbon dioxide greatly contributes to global warming, thus many studies have been conducted to estimate the forest biomass carbon stock as an important carbon storage. However, more studies are required for the selection and use of technique and remotely sensed data suitable for the carbon stock estimation in Korea In this study, the aboveground forest biomass carbon stocks of Danyang-Gun in South Korea was estimated using $k$NN($k$-Nearest Neighbor) algorithm and regression model, then the results were compared. The Landsat TM and 5th NFI(National Forest Inventory) data were prepared, and ratio images, which are effective in topographic effect correction and distinction of forest biomass, were also used. Consequently, it was found that $k$NN algorithm was better than regression model to estimate the forest carbon stocks in Danyang-Gun, and there was no significant improvement in terms of accuracy for the use of ratio images.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2009.03a
• /
• pp.456-463
• /
• 2009

The preconsolidation pressure has been commonly determined by oedometer test. However, it can also be determined by in-situ test, such as piezocone test with theoretical and(or) empirical correlations. Recently, Neural Network(NN) theory was applied and some models were proposed to estimate the preconsolidation pressure or OCR. However, since the optimization process of synaptic weights of NN model is dependent on the initial synaptic weights, NN models which are trained with different initial weights can't avoid the variability on prediction result for new database even though they have same structure and use same transfer function. In this study, Committee Neural Network(CNN) model is proposed to improve the initial weight dependency of multi-layered neural network model on the prediction of preconsolidation pressure of soft clay from piezocone test result. It was found that even though the NN model has the optimized structure for given training data set, it still has the initial weight dependency, while the proposed CNN model can improve the initial weight dependency of the NN model and provide a consistent and precise inference result than existing NN models.

• Journal of KIISE:Software and Applications
• /
• v.31 no.9
• /
• pp.1204-1217
• /
• 2004

Numerous statistical and machine learning techniques have been studied for automatic text classification. However, because they train the classifiers using only feature vectors of documents, ambiguity between two possible categories significantly degrades precision of classification. To remedy the drawback, we propose a new method which incorporates relationship information of categories into extant classifiers. In this paper, we first perform the document classification using the k-NN classifier which is generally known for relatively good performance in spite of its simplicity. We employ the relationship information from an object-based thesaurus to reduce the ambiguity. By referencing various relationships in the thesaurus corresponding to the structured categories, the precision of k-NN classification is drastically improved, removing the ambiguity. Experiment result shows that this method achieves the precision up to 13.86% over the k-NN classification, preserving its recall.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.1
• /
• pp.1-8
• /
• 2016

In this study, an WiFi fingerprinting method based on the k-nn algorithm was applied to improve the accuracy of location tracking of a moving train on a platform and evaluate the performance to minimize the estimation error of location tracking. The data related to the position of the moving train are monitored by the control center for trains and used widely for the safety and comfort of passengers. The train location tracking methods based on WiFi installed by telecom companies were evaluated. In this study, a simulator was developed to consider the environments of two cases; in already installed WiFi devices and new installed WiFi devices. The developed simulator can simulate the localized estimation of the position under a variety of conditions, such as the number of WiFi devices, the area of platform and entry velocity of train. To apply location tracking algorithms, a k-nn algorithm and fuzzy k-nn algorithm were applied selectively according to the underlying condition and also four distance measurement algorithms were applied to compare the error of location tracking. In conclusion, the best method to estimate train location tracking is a combination of the k-nn algorithm and Minkoski distance measurement at a 0.5m grid unit and 8 WiFi AP installed.

• Proceedings of the Korean Information Science Society Conference
• /
• 2003.10a
• /
• pp.193-195
• /
• 2003

본 논문에서는 k-Nearest Neighbor(k-NN) 알고리즘을 최적화하기 위해 지역적으로 다른 k(고려할 neighbor의 개수)를 사용하는 새로운 방법을 제안한다. 인스턴스 공간(instance space)에서 노이즈(noise)의 분포가 지역적(local)으로 다를 경우, 각 지점에서 고려해야 할 최적의 이웃 인스턴스(neighbor)의 수는 해당 지점에서의 국부적인 노이즈 분포에 따라 다르다. 그러나 기존의 방법은 전체 인스턴스 공간에 대해 동일한 k를 사용하기 때문에 이러한 인스턴스 공간의 지역적인 특성을 고려하지 못한다. 따라서 본 논문에서는 지역적으로 분포가 다른 노이즈 문제를 해결하기 위해 인스턴스 공간을 여러 개의 부분으로 나누고, 각 부분에 최적화된 k의 값을 사용하여 kNN을 수행하는 새로운 방법인 Local-k Nearest Neighbor 알고리즘(LkNN Algorithm)을 제안한다. LkNN을 통해 생성된 k의 집합은 인스턴스 공간의 각 부분을 대표하는 값으로, 해당 지역의 인스턴스가 고려해야 할 이웃(neighbor)의 수를 결정지어준다. 제안한 알고리즘에 적합한 데이터의 도메인(domain)과 그것의 향상된 성능은 UCI ML Data Repository 데이터를 사용한 실험을 통해 검증하였다.