• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.3 no.4
• /
• pp.234-248
• /
• 1998

Seven box cores from the disposal areas located in the southern part of the East Sea (Stations Band B') and in the offshore to the east of Pusan (Stations J and J'), and from their surrounding areas (Stations J2, J6 and H) were collected to investigate the effect of dumped wastes on the foraminiferal assemblages. The species diversity indices [S, H(S), E] of foraminifera and the total number of foraminifera show significant differences between the ocean waste disposal areas and their adjacent areas. Ocean waste disposal areas located in southern part of the East Sea (Stations Band B') show not only smaller number of foraminifera species but also lower values of coarse fraction content in the sediment and the number of benthic and planktonic foraminifera than the surrounding areas. Another ocean disposal area located offshore Pusan (Station J') contains abnormally greater number of planktonic (approximately 300 000 individuals/lO g dried sediment) and benthic (approximately 300, 000 individuals/10 g dried sediment) foraminifera compared to those of the adjacent areas. The waste dumped at Station J' probably acts as a nutrient causing the greater number of foraminifera. Station J shows low species diversity indices [S, H(S)]. The number of benthic foraminifera decreases from the surface to the downcore at Station J, which indicates that Station J is under stress. However, Stations J', J2 and J6 are under stable conditions as evidenced by the greater species diversity indices [S, H(S)] compared to other stations. No foraminifera were found with biological disease or abnormal chambers, which commonly occur in extremely stressed environment, in both the ocean disposal and adjacent areas. The organic matter decay of the wastes dumped in the study areas has not made the bottom water corrosive.

• Korean Journal of Food Science and Technology
• /
• v.35 no.6
• /
• pp.1079-1085
• /
• 2003

Modified atmosphere packaging was applied to oyster mushrooms (Pleurotus ostreatus) to study the effect of storage temperatures and packaging materialso. Whole mushrooms (200g) were package with polyethylene film $(PE,\;60{\mu}m\;thickness)$, ethylene vinyl acetate (EVA), or ceramic film (containing 5% zeolite) and stored at 0, 5, 10 and $20^{\circ}C$. Weight loss, color, firmness, gas composition $(O_2,\;CO_2)$ inside the film package and ethanol content in the tissue of MA packaged mushrooms were examined. Mushroom that were packed unwrapped in a conventional hardboard box (2 kg) lost marketability at a very early stage of storage due to weight loss, shrinkage, browning, and spore formation. During storage, film packaging prevented or retarded the deterioration of the mushrooms in the aspects of appearance, texture, and discoloration. Firmness slightly decreased with storage time. Total color difference was much higher in the control than in the film-packaged mushroom and rapidly increased at the early of storage. Correlation analysis showed a high correlation between total color difference and b values. These results were characterized by the reduced respiration rate resulting from elevated carbon dioxide and reduced oxygen levels in the package. At all storage temperatures, ethanol content in the tissue increased slightly at the early part of storage and rose considerably towards the end of the storage period. Ethanol content in the oyster mushrooms was higher in the stipe than in pileus tissues. The shelf life of the oyster mushrooms was about $8{\sim}11$ days at $0^{\circ}C$, about $4{\sim}6$ day at $5^{\circ}C$, about $2{\sim}3$ days at $10^{\circ}C$, and about $1{\sim}2$ days at $20^{\circ}C$.

• Korean Journal of Environment and Ecology
• /
• v.24 no.2
• /
• pp.157-165
• /
• 2010

This study was carried out to suggest the basic data of planting method for construction of buffer green space based on the land use in case of reclaimed land by analyzing land structure, planting concept, and planting structure in buffer green space, Rokko Island, Kobe, Japan. Rokko Island(total area: 580ha) is divided into port and logistics industry area and urban area by constructing the box type large-scale buffer green space. The land structure of buffer green space were biased mounding type, parallel mounding type, and complex mounding type. The width of buffer green space was 50meters in case of northern area, from 28 to 32meters in case of eastern area, and 37.5meters in case of western area, and the slope of that was from 18 to 25 degrees and the height of that was from 2 to 15meters. There were applied landscape and buffer planting concept on the sea side area of northern buffer green space, on the other hand landscape and shade planting concept on the Inner city side area of that. According to the result of planting structure analysis of northern buffer green space, the main woody species were those of deciduous-evergreen species grow in warm-temperate forest zone such as Quercus glauca, Cinnamomum camphora, Machilus thunbergii, Elaeagnus maritima. The results of maximum number of species and planting density by $100mm^2$ was that 9 species 22 individuals in canopy layer, 9 species 15 individuals in understory layer, 3 species 67 individuals in shrub layer, and 14 species 104 individuals in total. The plant coverage of northern buffer green space based on the ecological planting method was from 69 to 139% in case of canopy layer, from 26 to 38% in case of understory layer, from 6 to 7% in case of shrub layer, and from 101 to 184% in total. Index of plant crown volume of northern buffer green space based on the ecological planting method was from 1.40 to $3.12m^3/m^2$ in case of canopy layer, from 0.43 to $0.55m^3/m^2$ in case of understory layer, $0.06m^3/m^2$ in case of shrub layer, and from 1.89 to $3.73m^3/m^2$ in total.

• Radiation Oncology Journal
• /
• v.16 no.3
• /
• pp.303-310
• /
• 1998

Purpose : To evaluate the results of the treatment of locally advanced but resectable rectal cancers and to analyze prognostic factors. especially with the emphasis on the treatment time factor. Materials and Methods : There were 71 patients with rectal cancer who had been treated by curative surgical procedure and postoperative radiotherapy from August 1989 to December 1993. The minimum follow up period was 24 months and the median follow-up was 35 months Radiation therapy had been given by 6 MV linear accelerator by parallel opposing or four-box portals. Whole pelvis was treated up to 5040 cGy in most cases. Systemic chemotherapy had been given in 94$\%$ of the patients, mostly with 5-FU/ACNU regimen. Assessment for the overall and disease-free survival rates were done by life-table method and prognostic factors by Log-Rank tests. Results : Five-year overall survival, disease-free survival were 58.8$\%$ and 57$\%$, respectively. Two-year local control rate was 76.6$\%$. Stage according to Modified Astler-Coller (MAC) system, over 4 positive lymph nodes, over 6weeks interval between definitive surgery and adjuvant radiotherapy and over 7 days of interruption during radiotherapy period were statistically significant, or borderline significant prognostic factors. Conclusion : The treatment results of patients with rectal cancers are comparable to those of other large institutes. The treatment results for the patients with bowel wall penetration and/or positive regional lymph nodes were still discouraging for their high local recurrence rate for the patients with MAC 'c' stage diseases and high distant metastases rate even for the patients with node-negative diseases. Maybe more effective regimen of chemotherapy would be needed with proper route and schedule. To maximize postoperative adjuvant treatment. radiotherapy should be started at least within 6 weeks after surgery and preferably as soon as wound healing is completed. Interruption of treatment during radiotherapy course affects disease-free survival badly, especially if exceeds 7 days. So, the total treatment period trout definitive surgery to the completion of radiotherapy should be kept as minimal as possiable.

• Korean Journal of Environment and Ecology
• /
• v.32 no.3
• /
• pp.342-350
• /
• 2018

The purpose of this study was to identify the environmental factors that affect the beginning and end of calling by Hyalessa fuscata and Cryptotympana atrata, which are dominant cicada species in the central urban areas of Korea. The study area was Banpo Apartments in Seoul. The research period included two months, being from the end of July to the end of August 2015. We analyzed the start and end time of cicada calling, and on average H. fuscata started calling at 5:21 am and C. atrata started at 7:40 am. The average end time of calling was 6:31 pm for H. fuscata and 7:51 pm for C. atrata. From the scatter plot and box plot results, H. fuscata started calling at 05:00 am, whereas C. atrata consistently stopped calling at 20:00 pm compared to H. fuscata. Multiple regression analysis of the start and end time of cicada calling showed that sunrise time was a factor affecting the start of H. fuscata calling. The end time of H. fuscata calling was affected by sunset time and total cloud cover. The starting time of C. atrata calling was mostly affected by temperature and sunrise time. The effect of temperature was greater than that of sunrise time. The end time of C. atrata calling was strongly affected by sunset time, whereas peak temperature was also shown to affect the end time. From the above results, sunrise and sunset are thought to be the critical factor affecting the start and end time of H. fuscata calling. Therefore, H. fuscata started calling with sunrise, and the end time was also affected by sunset. Temperature was the factor most affecting the start of C. atrata calling and sunset was identified as the factor affecting the end time. Therefore, the start time of C. atrata calling shows variation with daily temperature changes, and C. atrata stop calling simultaneously with sunset.

• The Korean Journal of Physiology
• /
• v.1 no.2
• /
• pp.169-175
• /
• 1967

An experiment was designed to see if the hippocampus exerts any influence upon the aggressive behavior of male rats. Fighting between rats was observed for the estimation of aggressiveness. Seventeen rats in which the hippocampus was almost totally removed through a small hole with a diameter around 3 mm made in the neocortex at the boundary between the parietal and occipital lobes (hippocampal group), 8 rats with similar neocortical damage alone (operated control group), and 17 normal control rats (normal group) were prepared and subjected to the experiment 3 months after the operation. Applying electric shock of short duration to the feet in a box with grid floor, a fight was provoked between an animal belonging to the hippocampal group and one belonging to the nor-mal group, between a rat of the hippocampal group and one of the operated control group, and also between a rat of the operated control group and one of the normal group. Three observers judged the performance of each animal independently and described it as winning, defeated, tied, or non-fighting. Fifteen shocked trials were administered to each pair of animals with around 2 minutes' interval between each trial. An animal received a 'judging score' of 3 when it won more frequently than was defeated, a judging score of 2 when it won as frequently as was defeated, when all fights were tied, or when no fighting occurred, while it received a judging score of 1 when it won less frequently than was defeated. Group differences in performances were analyzed in terms of judging score using Kolmogorov-Smirnov test for one sample. The results obtained were as follows: 1. In the fights between the hippocampal and the normal groups, the hippocampal animals made significantly better judging scores than the normal animals did (Table 1). 2. There was no significant difference between the hippocampal and the operated control group as to the judging scores they made in the course of fights between the two groups. However, the hippocampal animals tended to dominate over the operated control group as judged by comparing the total 'winning' of the former (30) to that of the latter (14) (Table 2). 3. The total judging score made by the operated control group in the course of the fights against the normal group was not significantly superior to that made by the normal group (Table 3). It was inferred from the above results that, though inconspicuous, the hippocampus tended to exert an inhibitory influence upon the aggressive behavior of male rats.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.45 no.2
• /
• pp.60-67
• /
• 2017

The purpose of this study was to evaluate the influence of landscaping shade materials' porosity on the Mean Radiant Temperature (MRT) of summer outdoors. The MRTs were measured under seven different types of black membranes with holes of 8mm diameter at different intervals applied on the top of wooden boxes, and compared with those of four additional control plots with or without shade and lateral boxes. The applied porosities were 0.5, 1, 2, 4, 8, 16%, and 32%, and three groups of three shades were compared sequentially from August 13 to September 8, 2016. The MRTs under the shade without lateral block, no shade with lateral block, and shade with lateral block were $33.08^{\circ}C$, $45.80^{\circ}C$, and $42.3^{\circ}C$, respectively, while that of no-shaded no-lateral screen was $44.26^{\circ}C$, based on records from 11:00 AM to 3:00 PM on the days with a peak globe temperature higher than $30^{\circ}C$. An ANCOVA analysis showed that the MRTs under the shades with 0.5, 1, 2, 4, 8, 16%, and 32% porosities were calculated as 43.40, 43.10, 41.49, 40.43, 39.61, $37.91^{\circ}C$, and $38.12^{\circ}C$, respectively, while that in the no shaded control box was $45.8^{\circ}C$. The curve fitted between MRTs and the porosity showed a U-shaped quadratic function with the minimum MRT at 16% practically or 22.5% statistically.

• Korean Journal of Food Science and Technology
• /
• v.7 no.3
• /
• pp.128-134
• /
• 1975

For development of long-term storage method of sweet-persimmons using polyethylene film bags, basic experiment was conducted with 30 boxes of sweet-persimmons in 1973 and the same experiment was extended for industrial application with 2,500 boxes of the persimmons in the cold storage of Jinyoung Sweet-persimmon Association in 1974. Investigation was made on change of the quality by storage period. At the same time, persimmons put in the cold storage test were shipped to market at different time in order to monitor consumer response and commercial feasibility. The followings are conclusion obtained from the result of this experiment. 1. Storage of sweet-persimmon, Buyu, produced in Jinyoung, Kimhae was possible for 1 month at $2^{\circ}C{\pm}1^{\circ}C$ cold storage. This storage period was extended to 4 months until the end of February in case that the fruits were hermetically sealed in P.E. film bags of 0.08 to 0.1 mm thickness. 2. During the storage period of sweet-persimmons packed in the film bags, the loss of weight due to evaporation was effectively prevented with use of the film of bag thicker than 0.04 mm. 3. The storage ability of 3-5 persimmons per small bag was somewhat superior to that of many persimmons packed in the large box of 15kg capacity. 4. The thicker the film of bags, the more $CO_2$ gas was accumulated inside, however, from 1 month after beginning of the storage the rate of $CO_2$ accumulation became very low maintaining the stabilized level of 5-6% at the plot of 0.06-0.08mm thick bags. 5. While the persimmons were in storage, decreased was the content of total sugars, total acids, and vitamin C, of which the phenomenon was remarkable especially with the fruits of non-packed plot. 6. The sweet-persimmons in the film bags subjected to cold storage when shipped to market in their intact condition were more beneficial than when they were shipped out in unpacked condition. The intact fruits packed in the P.E. film bags were able to keep their commercial value for 10days in the outdoor situation. 7. The sweet-persimmons that were packed in the film bags and put in the cold storage had maintained promissing marketability and the economic feasibility was acknowledged when the experimental practice was applied to industrial scale.

• Horticultural Science & Technology
• /
• v.33 no.1
• /
• pp.61-69
• /
• 2015

This study was carried out to investigate the effects of shipping temperature and harvesting stage on the quality and vase life of cut flower in standard chrysanthemum 'Baekma' for export. Cut flowers harvested at flowering stage 4 were stored for 24 hours at $5^{\circ}C$, and then quality and vase life were evaluated after simulated shipping for 48 hours at 5, 20, and $35^{\circ}C$. In addition, cut flowers harvested in flowering stage 1 to stage 6 were evaluated after simulated shipping for 72 hours at $5^{\circ}C$. As shipping temperature increased, $CO_2$ concentration inside the box rapidly increased, and $O_2$ concentration greatly decreased. The vase life of cut flowers was extended by 3 days and chlorophyll content of leaves, fresh weight, solution uptake, and flower diameter were better maintained in $5^{\circ}C$ shipping than in 20 or $35^{\circ}C$ shipping. The vase life of cut flowers harvested at flowering stage 1 or 2 was extended by 5.2 or 5.5 days compared to those harvested at flowering stage 6, more 6. The fresh weight was lower and flower diameter was smaller by 1.3 or 2.5 cm in cut flowers of flowering stages 1 through 3 than flowering stages 4 through 6. In addition, the cut flowers of flowering stages 4 through 6 showed higher solution uptake than those of flowering stages 1 through 3. These results suggest that shipping at $5^{\circ}C$ of cut flowers harvested at flowering stage 4 is preferential for promoting vase life and quality of cut flower in standard chrysanthemum 'Baekma' for export to Japan.

• The Journal of Korean Society for Radiation Therapy
• /
• v.27 no.1
• /
• pp.61-71
• /
• 2015

Purpose : 3D Printers are used to create three-dimensional models based on blueprints. Based on this characteristic, it is feasible to develop a bolus that can minimize the air gap between skin and bolus in radiotherapy. This study aims to compare and analyze air gap and target dose at the branded 1 cm bolus with the developed customized bolus using 3D printers. Materials and Methods : RANDO phantom with a protruded tumor was used to procure images using CT simulator. CT DICOM file was transferred into the STL file, equivalent to 3D printers. Using this, customized bolus molding box (maintaining the 1 cm width) was created by processing 3D printers, and paraffin was melted to develop the customized bolus. The air gap of customized bolus and the branded 1 cm bolus was checked, and the differences in air gap was used to compare $D_{max}$, $D_{min}$, $D_{mean}$, $D_{95%}$ and $V_{95%}$ in treatment plan through Eclipse. Results : Customized bolus production period took about 3 days. The total volume of air gap was average $3.9cm^3$ at the customized bolus. And it was average $29.6cm^3$ at the branded 1 cm bolus. The customized bolus developed by the 3D printer was more useful in minimizing the air gap than the branded 1 cm bolus. In the 6 MV photon, at the customized bolus, $D_{max}$, $D_{min}$, $D_{mean}$, $D_{95%}$, $V_{95%}$ of GTV were 102.8%, 88.1%, 99.1%, 95.0%, 94.4% and the $D_{max}$, $D_{min}$, $D_{mean}$, $D_{95%}$, $V_{95%}$ of branded 1cm bolus were 101.4%, 92.0%, 98.2%, 95.2%, 95.7%, respectively. In the proton, at the customized bolus, $D_{max}$, $D_{min}$, $D_{mean}$, $D_{95%}$, $V_{95%}$ of GTV were 104.1%, 84.0%, 101.2%, 95.1%, 99.8% and the $D_{max}$, $D_{min}$, $D_{mean}$, $D_{95%}$, $V_{95%}$ of branded 1cm bolus were 104.8%, 87.9%, 101.5%, 94.9%, 99.9%, respectively. Thus, in treatment plan, there was no significant difference between the customized bolus and 1 cm bolus. However, the normal tissue nearby the GTV showed relatively lower radiation dose. Conclusion : The customized bolus developed by 3D printers was effective in minimizing the air gap, especially when it is used against the treatment area with irregular surface. However, the air gap between branded bolus and skin was not enough to cause a change in target dose. On the other hand, in the chest wall could confirm that dose decrease for small the air gap. Customized bolus production period took about 3 days and the development cost was quite expensive. Therefore, the commercialization of customized bolus developed by 3D printers requires low-cost 3D printer materials, adequate for the use of bolus.