• Journal of the Ergonomics Society of Korea
• /
• v.35 no.1
• /
• pp.1-10
• /
• 2016

Objective: This study aimed to find good design for summer functional farm shoes under the agricultural environment and working characteristics, which can help safe farm work and further promote the efficiency of working. Background: Most accidents at farms were overturn accidents caused by slipping or falling, and it was found that the main factors which caused the overturn accidents were inappropriate work shoes for the working conditions. These inappropriate work shoes often cause overturn accidents in the rural areas with steep paths. Method: A survey on work shoes was conducted with 174 farmers, and the outcome of this survey was used to find problems of work shoes and improvement ideas for the design of work shoes which can be used at farms. Results: Regarding the form of farm shoes, the ankle height was set at 6 inches to prevent the bending of the ankle and the inflow of foreign substances. The size and groove of the pattern of the outsole were extended to prevent catching of foreign substances. In the upper part, polyurethane and cordura were used in combination to secure air permeability, which was pointed out as the reason for the discomfort during the work wearing existing work shoes. Conclusion: Since farmers felt discomfort with the shoes which they were currently wearing, this study suggested a design of farm shoes by analyzing the important matters of the work shoes in development in order to improve such discomfort. Application: This study can help develop farm shoes that would practically ease farmers' burden of working at farm worksites and keep them safe.

• Journal of Powder Materials
• /
• v.24 no.1
• /
• pp.46-52
• /
• 2017

Fecralloy coating layer with large surface area is suitable for use as a filter media for efficient removal of hot gaseous pollutants exhausted from combustion processes. For uniform preparation of a Fecralloy coating layer with large surface area and strong adhesion to substrate, electrospray coating and thermal treatment processes are experimentally optimized in this study. A nano-colloidal solution with 0.05 wt% Fecralloy nanoparticles is successfully prepared. Optimized electrospraying conditions are experimentally discovered to prepare a uniform coating layer of Fecralloy nano-colloidal solution on a substrate. Drying the electrospray coated Fecralloy nano-colloidal solution layer at $120^{\circ}C$ and subsequent heating at $600^{\circ}C$ are the best post-treatment for enhancing the adhesion force and surface roughness of the Fecralloy coating layer on a substrate. An electrospray coating system, consisting of several multi-groove nozzles, is also experimentally confirmed as a reasonable device for uniform coating of Fecralloy nano-colloid on a large area substrate.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.499-500
• /
• 2006

The electrode wear in micro-EDM significantly deteriorates the machining accuracy. In this regard, electrode wear needs to be compensated in-process to improve the product quality. Therefore, there are substantial amount of research about electrode wear. In this study a control method for micro-EDM using discharge pulse counting is proposed. The method is based on the assumption that the removed workpiece volume is proportional to the number of discharge pulses, which is verified from experimental results analyzing geometrically machined volume according to various number of discharges. Especially, the method has an advantage that electrode wear does not need to be concerned. The proposed method is implemented to an actual micro-EDM system using high speed data acquisition board, simple counting algorithm with 3 axis motion system. As a result, it is demonstrated that the volume of hole machined by EDM drilling can be accurately estimated using the number of discharge pulses. In EDM milling process a micro groove without depth variation caused by electrode wear could be machined using the developed control method. Consequently, it is shown that machining accuracy in drilling and milling processes can be improved by using process control based on the number of discharge pulses.

• Journal of the Korean institute of surface engineering
• /
• v.49 no.6
• /
• pp.555-559
• /
• 2016

A biodegradable nanofiber scaffolds using electrospining provide fibrous guidance cues for controlling cell fate that mimic the native extracellular matrix (ECM). It can create a pattern using conventional electrospining method, but has a difficulty to generate one or more pattern structures. Femtosecond(fs) laser ablation has much interested in patterning on biomaterials in order to distinguish the fundamental or systemic interaction between cell and material surface. The ablated materials with a short pulse duration using femtosecond laser that allows for precise removal of materials without transition of the inherent material properties. In this study, linear grooves and circular craters were fabricated on electrospun nanofiber scaffolds (poly-L-lactide(PLLA)) by femtosecond laser patterning processes. As parametric studies, pulse energy and beam spot size were varied to determine the effects of the laser pulse on groove size. We confirmed controlling pulse energy to $5{\mu}J-20{\mu}J$ and variation of lens maginfication of 2X, 5X, 10X, 20X created grooves of width to approximately $5{\mu}m-50{\mu}m$. Our results demonstrate that femtosecond laser processing is an effective means for flexibly structuring the surface of electrospun PLLA nanofibers.

• The Korean Journal of Pain
• /
• v.20 no.2
• /
• pp.111-115
• /
• 2007

Background: Selective diagnostic blocks of the medial branches of the dorsal primary ramus are usually performed under the guidance of fluoroscopic or computed tomography. Recently, however, ultrasound guidance has been suggested as an altemative method. In this study, the distances between the vertebral structures were measured and compared with the values measured using magnetic resonance imaging (MRI) to assess the clinical feasibility of using ultrasound-guided block in Korean patients. Methods: Five male and 15 female patients were enrolled in this study. The target point of the medial branch block in our study was the groove at the base of the superior articular process, We measured the depth from the skin to the target point at the transverse process (d-TP) and to the most superficial point of the superior articular process (d-AP). Results: The d-TP and d-AP values measured under ultrasound guidance were concordant with the values measured using MRI. Conclusions: The images of the bony landmarks obtained under ultrasound examination could be useful for ultrasound-guided lumbar medial branch block.

• Archives of Craniofacial Surgery
• /
• v.14 no.2
• /
• pp.115-118
• /
• 2013

Craniosynostosis is a congenital anomaly in which cranial sutures close prematurely and restrict skull growth. In this paper, the case of two siblings, a male and a female, who were both diagnosed as craniosynostosis is reported. They underwent corrective osteotomy for cranial vault remodeling. A 22-month-old female infant who was brought to the department of plastic and reconstructive surgery of the authors' hospital was diagnosed with plagiocephaly. At the same time, her 7-month-old brother was diagnosed with brachycephaly. In the case of the female infant, corrective coronal osteotomy and supraorbital bar advancement were performed. Her brother underwent frontal advancement osteotomy using Tessier's tongue in the groove procedure. After the correction of the craniosynostosis, the two patients recovered in several days later, and the results were good in both cases cosmetically and functionally. They showed normal head circumference increasing curves and no symptom of functional disorder in their last follow-up. Isolated or nonsyndromic craniosynostosis is sporadic but mostly autosomal dominant. This paper presents a case of craniosynostosis with a genetic tendency; and although it occurred between siblings, the affected lesions differed. Thus, appropriate diagnosis and management in patients are needed.

• Parasites, Hosts and Diseases
• /
• v.51 no.4
• /
• pp.441-448
• /
• 2013

This study describes the first record of Bourgelatia diducta (Nematoda: Chabertiidae) from wild boars in the Republic of Korea (=South Korea). Gastrointestinal tracts of 87 Korean wild boars (Sus scrofa coreanus) hunted in mountains in the south-western part of South Korea between 2009 and 2012 were examined for their visceral helminths. B. diducta, as identified by morphological characteristics of the head and tail, were recovered from the large intestine of 47 (54%) wild boars. The average length of adult female worms was $11.3{\pm}0.872$ mm and the thickest part of the body measured $0.54{\pm}0.04$ mm in maximum width, while those of males were $9.8{\pm}0.72$ and $0.45{\pm}0.03$ mm, respectively. The characteristic J-shaped type II ovejector was observed in females, and the type II dorsal ray with 2 rami on each side of the median fissure was uniquely seen in males. The buccal capsule was small, relatively thin-walled, cylindrical, very short, and ring-shaped. The externodorsal ray arose from a common stem with the dorsal ray. The cervical groove was absent. The anterior extremity was equipped with 20-22 external corona radiata, 4 cephalic papillae and 2 lateral amphids around the mouth. The eggs were $66.0{\times}38.9{\mu}m$ in average size. By the present study, B. diducta (Nematoda: Chabertiidae) is recorded for the first time in South Korea. Additionally, morphological characteristics and identification keys provided in the present study will be helpful in the faunistic or taxonomic studies for strongylid nematodes related.

• Archives of Plastic Surgery
• /
• v.33 no.5
• /
• pp.541-545
• /
• 2006

Purpose: There are many methods for the reconstruction of the facial defect after an excision of a skin cancer; such as skin graft, local flap, free flap, etc... Skin graft has its' limitations; it could remain in different color with in regards of the recipient to donor, with an unfavorable scar. Free flap can lead to big donor site morbidity with long operation time and uncontrolled scar as a disadvantage factor. Compared to the prior, local flap offers several merits; sufficient blood supply, good tissue quality and short operation time. We revised 'V-Y-S flap' for the facial defect, which proved to have favorable outcomes. Methods: Total 7 V-Y-S flaps were performed to patients with skin cancers(six squamous cell carcinoma and one basal cell carcinoma). Two of these flaps were combined with composite grafts, one with full thickness skin graft. Six patients were female and one male. The average diameter of defects after excision was 2.3 cm. The follow-up period was 18 months maximally. Results: We treated seven facial skin cancers with 'V-Y-S flap'. There were no flap necrosis, cancer recurrence and scar contracture as a result. Furthermore, this method also offers a favorable central scar line that is parallel to the nasolabial fold and the nasojugal groove, especially in the nasolabial area and superomedial side of the cheek. With this method, we could cover a maximum diameter of 4cm facial defect. Conclusion: In conclusion, it is suggested that V-Y-S flap is a useful method to cover facial defects after the excision of a skin cancer.

• Journal of Microbiology and Biotechnology
• /
• v.25 no.11
• /
• pp.1827-1834
• /
• 2015

The SMG1 lipase from Malassezia globosa is a newly found mono- and diacylglycerol (DAG) lipase that has a unique lid in the loop conformation that differs from the common alpha-helix lid. In the present study, we characterized the contribution of three residues, L103 and F104 in the lid and F278 in the rim of the binding site groove, on the function of SMG1 lipase. Site-directed mutagenesis was conducted at these sites, and each of the mutants was expressed in the yeast Pichia pastoris, purified, and characterized for their activity toward DAG and p-nitrophenol (pNP) ester. Compared with wild-type SMG1, F278A retained approximately 78% of its activity toward DAG, but only 11% activity toward pNP octanoate (pNP-C8). L103G increased its activity on pNP-C8 by approximately 2-fold, whereas F104G showed an approximate 40% decrease in pNP-C8 activity, and they both showed decreased activity on the DAG emulsion. The deletion of 103-104 retained approximately 30% of its activity toward the DAG emulsion, with an almost complete loss of pNP-C8 activity. The deletion of 103-104 showed a weaker penetration ability to a soybean phosphocholine monolayer than wild-type SMG1. Based on the modulation of the specificity and activity observed, a pNP-C8 binding model for the ester (pNP-C8, N102, and F278 form a flexible bridge) and a specific lipid-anchoring mechanism for DAG (L103 and F104 serve as "anchors" to the lipid interface) were proposed.

• Korean Journal of Optics and Photonics
• /
• v.28 no.2
• /
• pp.53-58
• /
• 2017

This paper presents the design and fabrication of a planar nano-diffraction grating for an integrated miniature spectrometer module. The proposed planar nano-diffraction grating consists of nonuniform periods, to focus the reflected beams from the grating's surface, and an asymmetrical V-shaped groove profile, to provide uniform diffraction efficiency in the wavelength range from 400 to 650 nm. Also, to fabricate the nano-diffraction grating using low-cost UV-NIL technology, we analyzed the FT-IR spectrum of a uvcurable resin and optimized the conditions for the UV curing process. Then, we precisely fabricated the polymeric nano-diffraction grating within 5 nm in dimensional accuracy. The integrated spectrometer module using the fabricated polymeric planar nano-diffraction grating provides spectral resolution of 5 nm and spectral bandwidth of 250 nm. Our integrated spectrometer module using a polymeric planar nano-diffraction grating serves as a quick and easy solution for many spectrometric applications.