DOI QR코드

DOI QR Code

Electrospray and Thermal Treatment Process for Enhancing Surface Roughness of Fecralloy Coating Layer on a Large Sized Substrate

대면적 Fecralloy 코팅층의 표면 거침도 극대화를 위한 정전분무 및 열처리 공정 연구

  • Lee, Hye Moon (Powder Technology Department, Korea Institute of Materials Science) ;
  • Koo, Hye Young (Materials Implementation Department, Korea Institute of Materials Science) ;
  • Yang, Sangsun (Powder Technology Department, Korea Institute of Materials Science) ;
  • Park, Dahee (Powder Technology Department, Korea Institute of Materials Science) ;
  • Jung, Sooho (Powder Technology Department, Korea Institute of Materials Science) ;
  • Yun, Jung-Yeul (Powder Technology Department, Korea Institute of Materials Science)
  • 이혜문 (한국기계연구원 부설 재료연구소 분말기술연구실) ;
  • 구혜영 (한국기계연구원 부설 재료연구소 소재실용화연구실) ;
  • 양상선 (한국기계연구원 부설 재료연구소 분말기술연구실) ;
  • 박다희 (한국기계연구원 부설 재료연구소 분말기술연구실) ;
  • 정수호 (한국기계연구원 부설 재료연구소 분말기술연구실) ;
  • 윤중열 (한국기계연구원 부설 재료연구소 분말기술연구실)
  • Received : 2017.01.18
  • Accepted : 2017.01.26
  • Published : 2017.02.28

Abstract

Fecralloy coating layer with large surface area is suitable for use as a filter media for efficient removal of hot gaseous pollutants exhausted from combustion processes. For uniform preparation of a Fecralloy coating layer with large surface area and strong adhesion to substrate, electrospray coating and thermal treatment processes are experimentally optimized in this study. A nano-colloidal solution with 0.05 wt% Fecralloy nanoparticles is successfully prepared. Optimized electrospraying conditions are experimentally discovered to prepare a uniform coating layer of Fecralloy nano-colloidal solution on a substrate. Drying the electrospray coated Fecralloy nano-colloidal solution layer at $120^{\circ}C$ and subsequent heating at $600^{\circ}C$ are the best post-treatment for enhancing the adhesion force and surface roughness of the Fecralloy coating layer on a substrate. An electrospray coating system, consisting of several multi-groove nozzles, is also experimentally confirmed as a reasonable device for uniform coating of Fecralloy nano-colloid on a large area substrate.

Keywords

References

  1. K. Ohno, K. Shimato, N. Taoka, H. Santae, T. Ninomiya and T. Komori: SAE world congress, Detroit, MI (2000).
  2. S. Ichikawa. T. Harada and T. Hamanaka: Ceramics, 38 (2003) 296.
  3. N. Miyakawa, H. Maeno and H. Takahashi: SAE world congress, Detroit, MI (2003).
  4. J. Banhart: Prog. Mater. Sci., 46 (2001) 559. https://doi.org/10.1016/S0079-6425(00)00002-5
  5. R. R. Unocic, G. B. Viswanathan, P. M. Sarosi, S. Karthikeyan, J. Li and M. J. Mills: Mater. Sci. Eng. A, 483 (2008) 25.
  6. C. J. Bennett, T. E., Hayes, S. T. Kolaczkowski and W. J. Thomas: Proc. R. Soc. Lond., A, 439 (1992) 465. https://doi.org/10.1098/rspa.1992.0162
  7. M. V. Twing, D. E. Webster, A. Cybulski and J. A. Moulijn: Structured Catalysts and Reactors, Marcel Dekker Inc., New York, (1998) 59.
  8. P. Avila, M. Montes and E. Miro: Chem. Eng. J., 109 (2005) 1. https://doi.org/10.1016/j.cej.2005.02.024
  9. J. Y. Yun, S. Yang, H. Y. Koo and H. M. Lee: J. Korean Powder Metall. Inst., 18 (2011) 526 https://doi.org/10.4150/KPMI.2011.18.6.526
  10. C. H. Cho, S. H. Park, Y. W. Choi and B. G. Kim: Surf. Coat. Tech., 201 (2007) 4847. https://doi.org/10.1016/j.surfcoat.2006.07.032
  11. M. I. Lerner, V. V. Shamanskii, G. G. Savel'ev and T. A. Yurmazova: Mendeleev. Commun., 11 (2001) 4.
  12. S. Dong, G. Zou and H. Yang: Scripta Mater., 44 (2001) 17. https://doi.org/10.1016/S1359-6462(00)00552-2
  13. C. Cho, Y. W. Choi, C. Kang and G. W. Lee: Appl. Phys. Lett., 91 (2007) 141501. https://doi.org/10.1063/1.2794724
  14. V. S. Giria, R. Sarathia, S.R. Chakravarthy and C. Venkataseshaiah: Mater. Lett., 58 (2004) 1047. https://doi.org/10.1016/j.matlet.2003.08.015
  15. M. Cloupeau and B. Prunet-Foch: J. Electrostatics, 22 (1989) 135. https://doi.org/10.1016/0304-3886(89)90081-8
  16. M. Cloupeau and B. Prunet-Foch: J. Electrostatics, 25 (1990) 165. https://doi.org/10.1016/0304-3886(90)90025-Q
  17. J. Fernandez de la Mora and I.G. Loscertales: J. Fluid Mech., 260 (1994) 155. https://doi.org/10.1017/S0022112094003472