• Journal of Broadcast Engineering
• /
• v.14 no.6
• /
• pp.721-732
• /
• 2009

AT-DMB system has been developed to increase data rate up to double of conventional T-DMB in same bandwidth while maintaining backward compatibility. The AT-DMB system adopted hierarchical modulation which adds BPSK signal or QPSK signal as enhanced layer to existing DQPSK signal. The enhanced layer signal should be small enough to maintain backward compatibility and to minimize the coverage loss of existing T-DMB service area. But this causes the enhanced layer signal of AT-DMB susceptible to fading effect in transmission channel. A turbo code which has powerful error correction capability is applied to the enhanced layer signal of the AT-DMB system for compensating channel distortion. We developed the prototype AT-DMB transmitter and receiver systems for performance evaluation. LAB test for analysing the effect of constellation ratio between existing base layer signal and enhancement layer signal, was conducted and the measurement results are shown with analysis comments.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.4
• /
• pp.17-22
• /
• 2015

In this paper, we propose a cooperative vehicle communication scheme for high transmission efficiency and coverage extension under multipath fading environment of moving vehicle networks. The proposed scheme uses a Network coding scheme for improvement of receiving performance by using virtual Multiple-Input Multiple-Output(MIMO) transmit diversity. Simulation results have shown that the proposed scheme also provides alleviated Inter Symbol Interference(ISI) and Inter Channel Interference(ICI) as well as Signal-to-Noise Ratio(SNR) improvement and improve 3dB compared to the conventional scheme, since it can utilize the good properties of spatial diversity and coding gain by using virtual MIMO configuration. In this paper, we propose simulations of Ultra-Wideband(UWB) communication system to show validity by using the MATLAB.

• Journal of Astronomy and Space Sciences
• /
• v.37 no.2
• /
• pp.117-129
• /
• 2020

In a Satellite communication system, a link budget analysis is the detailed investigation of signal gains and losses moving through a channel from a sender to receiver. It inspects the fading of passed on data signal waves due to the process of spreading or propagation, including transmitter and receiver antenna gains, feeder cables, and related losses. The extent of the proposed tool is to make an effective, efficient, and user-friendly approach to calculate link budget analysis. It is also related to the satellite communication correlation framework by building up a graphical interface link analysis tool utilizing STK^® software with the interface of C# programming. It provides better kinds of graphical display techniques, exporting and importing data files, printing link information, access data, azimuth-elevation-range (AER), and simulation is also possible at once. The components of the link budget analysis tool include transmitter gain, effective isotropic radiated power (EIRP), free space loss, propagation loss, frequency Doppler shift, flux density, link margin, elevation plot, etc. This tool can be useful for amateur users (e.g., CubeSat developers in the universities) or nanosat developers who may not know about the RF communication system of the satellite and the orbital mechanics (e.g., orbit propagators) principle used in the satellite link analysis.

• IEIE Transactions on Smart Processing and Computing
• /
• v.3 no.4
• /
• pp.212-220
• /
• 2014

The current cellular communications are optimized for low mobility users, meaning that their performance is degraded at high speed. Therefore, passengers in a high-speed train experience very poor radio link quality due to the significantly large number of simultaneous handovers. In addition, wireless data traffic is expanding exponentially in trains, subways and buses due to the widespread use of smartphones and mobile devices. To solve the inherent problem of cellular communication networks and meet the growing traffic demand, this paper proposes the mobile hotspot network of a millimeter-wave communication system as a mobile wireless backhaul. This paper describes the physical layer design of uplink and downlink in the proposed system, and the performances of uplink and downlink are evaluated under Rician fading channel conditions. The implemented baseband prototype of the proposed millimeter-wave communication modem is presented. This system can provide a Gbps data rate service in high-speed trains carrying hundreds of wireless Internet users.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.12
• /
• pp.3-13
• /
• 2013

This paper contains two algorithms proposed for synchronization in OFDM system. The first is having 1 symbol offset while calculating the timing metric, and the second is introduced in new parameter such as Reduction Factor(${\rho}$), Break Constant(${\beta}_k$) and Implant Depth(${\delta}_I$) in order to control the power of CP(Cyclic Prefix) area. Two proposed method are evaluated performance with conventional methode, and than the result of simulation show proposed methods is better than conventional methode while it experience into multipath fading channel.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2011.11a
• /
• pp.318-320
• /
• 2011

본 논문은 다중경로 페이딩 채널에서 폐루프 MIMO-OFDM 시스템을 구현할 때 효율적인 피드백 정보를 제공하기 위한 채널 품질 지시자(Channel Quality Indicator, CQI)를 결정하는 방법에 관한 것이다. 다중경로 페이딩에서 OFDM심볼의 부반송파들이 주파수영역에서 서로 다른 채널이득을 경험할 수 있고 여러 채널행렬 중에서 어느 채널행렬에 기반해서 채널 상태를 반영하는 채널대표값을 계산해야 하는지 분명하지 않다. 따라서 수신측에서 송신측으로 피드백하기 위해서 하나의 CQI정보를 생성하는데 필요한 채널 대표값이 필요하다. 채널 대표값을 구할 때 쉽게 생각 할 수 있는 방법인 기준신호의 평균 채널행렬을 이용하는 경우에는 채널상태를 정확히 반영하지 못하고 기준신호의 MMSE검출 후 SNR을 검출하는 방식은 채널상태를 정확히 반영해서 성능을 향상시키지만 많은 연산량을 필요로 한다. 이러한 문제를 해결하기 위해 허미시안 연산된 값을 채널 행렬 평균화해서 채널상태를 정확하게 반영하고 연산량을 줄이는 것에 중점을 두고 있다.

• ETRI Journal
• /
• v.19 no.3
• /
• pp.228-241
• /
• 1997

In this paper, we present a design of modem and vocoder digital signal processor (DSP) chips for CDMA mobile station. The modem chip integrates CDMA reverse link modulator, CDMA forward link demodulator and Viterbi decoder. This chip contains 89,000 gates and 29 kbit RAMs, and the chip size is $10 mm{\times}10.1 mm$ which is fabricated using a $0.8{\mu}m$ 2 metal CMOs technology. To carry out the system-level simulation, models of the base station modulator, the fading channel, the automatic gain control loop, and the microcontroller were developed and interfaced with a gate-level description of the modem application specific integrated circuit (ASIC). The Modem chip is now successfully working in the real CDMA mobile station on its first fab-out. A new DSP architecture was designed to implement the Qualcomm code exited linear prediction (QCELP) vocoder algorithm in an efficient way. The 16 bit vocoder DSP chip has an architecture which supports direct and immediate addressing modes in one instruction cycle, combined with a RISC-type instruction set. This turns out to be effective for the implementation of vocoder algorithm in terms of performance and power consumption. The implementation of QCELP algorithm in our DSP requires only 28 million instruction per second (MIPS) of computation and 290 mW of power consumption. The DSP chip contains 32,000 gates, 32K ($2k{\times}16\;bit$) RAM, and 240k ($10k{\times}24\;bit$) ROM. The die size is $8.7\;mm{\times}8.3\;mm$ and chip is fabricated using $0.8\;{\mu}m$ CMOS technology.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.48 no.6
• /
• pp.14-21
• /
• 2011

In this paper, we propose an efficient symbol mapping method based on LLR (log-likelihood ratio) statistic for HARQ employing CoRe (constellation rearrangement) with 64QAM. The signal constellations for 64QAM with limited number of retransmissions are selected by the proposed mapping rule. Then we determine the transmission order of selected constellations. The proposed scheme reduces the performance deviation between transmit symbols so as to improve the system performance. Through simulation results, the proposed and existing CoRe mapping methods are compared with respect to error rate and throughput in MIMO-OFDM system over fading channel and we confirm the applicability of the proposed scheme in practical wireless communications environment.

• Journal of Advanced Navigation Technology
• /
• v.5 no.2
• /
• pp.158-164
• /
• 2001

We presented a channel model for the inter vehicle radio link including the reflection from the road surface, side road vehicle and concrete wall. Then we theoretically derived the path loss and delay profile characteristics using the Ray tracing method efficiently analyzing millimeter wave or optic wave. Finally, we shown the improvement of propagation characteristics by diversity techniques, BCH coding and convolution coding techniques. At the result, MRC diversity techniques and BCH coding can't obtained PER = $10^{-6}$ which is considered to be data service criterion. But, we knew that Packet Error Rate Characteristic can obtained PER = $10^{-6}$, which is considered to be data service criterion, when convolution coding scheme are adopted in Rician fading.

• Journal of Advanced Navigation Technology
• /
• v.10 no.1
• /
• pp.1-6
• /
• 2006

In this paper, we have analyzed transmission time for WAP over CDMA using turbo code scheme. In order for SAR to improve the transfer capability, the transmission of messages have been simulated using a fragmentation that begins with the total package and incremental fragmentation for each layer using the WTP to define the resultant packet size and the level of fragmentation for each proceeding layer. This turbo code scheme decreases transmission time of RLP baseband packets by sending packets. From the results, we were able to obtain packet transmission time and optimal WTP packet size for WAP over CDMA in a Rician fading channel.