• Korean Journal of Food Science and Technology
• /
• v.28 no.2
• /
• pp.345-351
• /
• 1996

Studies on extraction and color characteristics of purple sweet potato (PSP) pigment were performed to provide the basic information for the utilization of PSP as a new source of natural food colorant. PSP pigment was extracted well with the polar solvents such as distilled water, ethanol, and methanol. but hardly extracted with the non-polar solvents. Among the tested solvents, 20% ethanol solution containing 0.1% citric acid was found to be the most efficient for extraction of the pigment from PSP. PSP contained high amount of pigment not only in the epidermis but also in the flesh of the potato. The PSP pigment was heat stable even under pretreatments such as autoclaving and blanching of the potato before extraction. The optimum temperature of the extraction for the PSP Pigment was decided to be $30^{\circ}C$ by considering the stability and the rate of extraction. The pigment was markedly influenced by the change of pH. The color of the pigment solution was red at the pH range of $1.0{\sim}3.0$, became blue at $7.0{\sim}8.0$, then turned green at $9.0{\sim}10.0$. A characteristic batho-chromic shift of the pigment solution was observed as the pH of the solution increased.

• Korean Journal of Soil Science and Fertilizer
• /
• v.17 no.3
• /
• pp.242-252
• /
• 1984

A port experiment was conducted to compare the effect of chemical forms of nitrogen fertilizers on the rice growth and soil characteristics. The nitrogen fertilizers used for this study were ammonium sulfate, ammonium nitrate, ammonium chloride and urea. The results are summarized as follows. 1. The differences in pH of the soil and surface water between treatments during the first week after fertilizer application were great and the pH values were in the order of urea > ammonium nitrate > ammonium sulfate > ammonium chloride treatment. However the differences were insignificant after the first week. 2. The differences in pH of the air-dried soil somewhat increased and pH values were in the order of urea > ammonium nitrate > ammonium chloride > ammonium sulfate treatment. 3. Sulfur contents of the soil and the rice leaf and N content of the rice leaf were highest when ammonium sulfate was applied. But there were few differences between the treatments in total N content of the soil and in P, K, Ca and Mg contents of the soil and the rice leaf. 4. Number of tillers and dry matter weight of the rice plant were highest in ammonium sulfate plot throughout all the growing stages. 5. Number of panicle per hill was highest in ammonium sulfate plot, and this brought the highest grain yield in ammonium sulfate plot. The lowest grain yield in ammonium nitrate plot resulted from the lowest number of panicle per hill and ripened grain ratio.

• Korean Journal of Soil Science and Fertilizer
• /
• v.24 no.3
• /
• pp.219-224
• /
• 1991

An acid tolerant R. meliloti "YA03" which was characterized through both acidified tube and pot soil experiment, was examined on its inoculation effect to alfalfa[Medicago sativa (L.)]cv. Vernal on hilly acid soil. It was conducted for 2 years to evaluate inoculation residual effect and there were two-fertilizer factors of nitrogen(0.8kg/10a) and lime(0,162kg/10a)as urea and $Ca(OH)_2$, respectively. The results obtained were summarized as follows : 1. In the 1st-year experiment, YA03 inoculated without nitrogen and lime application showed higher symbiotic effectiveness than check strains, YA026 and Rm2011 in nodule mass, $N_2$-fixing activity, and dry matter yield, but with N 8kg/10a application lower effectiveness than Rm2011. 2. In the 2nd-year experiment, Alfalfa dry matter yield by YA03 inoculation with N application(without lime) was 74% higher than that(276 kg/10a) in the 1st year, and the value showed 166%, 20%, and 21% increments as compared with noninoculated control(180kg/10a). YA026(399kg/10a), and Rm2011(397kg/10a), respectively. 3. In the 2nd-year experiment of N applicated plote(without lime), especially, YA03 showed higher shoot nitrogen(7.7kg N/10a/Yr.) fixed and soil rhizobial population($1{\times}10^4\;cells/g.\;soil$) than check strains. 4. On the basis of lime application, application effect of three major fertilizers with YA03 inoculation on alfalfa yield and soil rhizobial population was in the order of $N+P_2O_5+K_2O>P_2O_5+K_2O>P_2O_5+K_2O$. 5. On the whole, alfalfa yield by acid tolerant R. meliloti YA03 inoculation on hilly acid soil was enhanced with nitrogen application, and besides it appeared 44% higher with lime than without lime.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.30 no.2
• /
• pp.196-203
• /
• 2003

The application of sealants is a highly technique-sensitive procedure, requiring an extremely dry field prior to placement. Moisture contamination of the etched enamel surface before sealant placement is cited as the main reason for sealant failure. The purpose of this study was to evaluate the effects of different methods of sealant application on the shear bond strength of sealants to enamel. In groups 1, 2, 3, 4 Teethmate(unfilled sealant) was used, while Ultraseal XTplus(filled sealant) was used in groups 5, 6, 7, 8. Groups 1 and 5(control) were acid etched for 15 seconds using 35% phosphoric acid, washed and then dried. In groups 2, 6 drying agents were applied, and in groups 3, 7 bonding agents were applied and light cured. In groups 4 and 8 both drying agent and bonding agent were applied. Then sealant was cured to the specimen using molds 3mm in diameter and 2mm in height. Thermocycling was performed and shear bond strength was finally measured. The following results were obtained : 1. Groups using filled sealant(groups 5, 6, 7, 8) showed higher shear bond strengths compared to groups using unfilled sealant(groups 1, 2, 3, 4). 2. Among groups using unfilled sealant(groups 1, 2, 3, 4), groups 2, 3, 4 showed significantly higher shear bond strength compared to group 1(p<0.05). There were no significant differences among groups 2, 3 and 4. 3. There were no significant differences(p>0.05) among groups using filled sealant(groups 5, 6, 7, 8). 4. When modes of fracture were examined, cohesive failure was observed in groups 2, 3 and 4.

• Korean Journal of Ecology and Environment
• /
• v.41 no.spc
• /
• pp.50-60
• /
• 2008

We performed the experiment to evaluate the effect of different DO concentrations (0.5, 4.5 and 9.0 $mgO_2L^{-1}$) and water depths (20, 50 and 80 cm) on the filtering rate, mortality, and pseudifeces production of Unio douglasiae against the cyanobacterial bloom (mainly Microcystis aeruginosa). A solitary-living bivalve U. douglasiae was collected in the upstream region of the North Han River (Korea). The harvested mussels were carefully transferred to the laboratory artificial management system, which was controlled temperature $(18{\pm}2^{\circ}C)$, flow rate (10L $h^{-1}$), food $(Chlorella^{TM})$, sediment (pebble and clay), light intensity (ca. $20{\mu}mol$ photons), and photocycle (12 L : 12 D). In the field observation, the mussel mortality was significantly correlated with water temperature, pH and DO concentration (P<0.05). The mortality was decreased with water depth; 65, 90, 80% of mortality at 20, 50, 80 cm water-depth, respectively. Filtering rate (FR) showed the highest value at 50 cm water depth, and thereby the concentration of chlorophyll-${\alpha}$ decreased continuously by 94% of the control at the end of the experiment. In contrast, FR decreased by 34% of the initial concentration at 20 cm water depth. Over the given water-depth range, the mussel FR ranged from $0.15{\sim}0.20L\;gAFDW^{-1}hr^{-1}$ during the 18hrs of experiment, and thereafter, they appeared to be approximately 0.11, 0.26 and 0.30 L $gAFDW^{-1}hr^{-1}$ at 20, 50 and 80cm water depth, respectively. FR was highest with the value of 0.46L $gAFDW^{-1}hr^{-1}\;at\;0.5mgO_2 L^{-1}$ at the early stage of the experiment, while it increased with DO concentration. Maximum pseudofaeces production was 11.2 mg $gAFDW^{-1}hr^{-1}\;at\;9.0mgO_2L^{-1}$. Our results conclude that U. douglasiae has a potential to enhance water quality in eutrophic lake by removing dominant cyanobacteria, but their effects vary with environmental parameters and the water depth at which they are located.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.24 no.3
• /
• pp.183-192
• /
• 2004

This pot experiment was conducted to investigate the effects of systematic variation application of Fe, Mn, Cu, and Zn on forage performance of orchardgrass and white clover. The treatments of systematic variation were 0/100, 25/75, 50/50. 75/25, and $100/0\%$ in the Fe/Cu(trial-1). Mn/Zn(trial-2), and Fe+Cu/Mn+Zn(trial-3), respectively The treatments of Fe/Mn/Cu/Zn(trial-4) were composed of $70\%$ for main element and $10\%$ for other 3 elements, respectively. 1. The contents of N-compounds in forages tended to be in inverse proportion to the yields. In the Mn/Zn trial, the 0/l00 to white clover resulted in the relatively high contents of soluble N-compounds and low ratio of pure protein/soluble N-compounds in company with a severe yield decrease. 2. In the Fe+Cu/Mn+Zn trial, the 0/100 and 100/0 resulted in the somewhat high contents of N-compounds in white clover. It was likely to be caused by the concentration effect derived from yield decrease. In addition, the 100/0 resulted in the relatively high content of soluble N-compounds and low ratio of pure protein/soluble N-compounds. The protein synthesis in white clover was likely to be negatively influenced by the 100/0. 3. In the Fe/Mn/Cu/Zn trial, white clover showed the low contents of crude and pure protein at the 1st cut. It was likely to be caused by the unbalanced mutual ratios derived from the high application levels of each single element. 4. In white clover at the 5th cut, the 0/100 of Mn/Zn and 100/0 of Fe+Cu/Mn+Zn resulted in the relatively high content of K. It was likely to be caused by the concentration effect derived from yield decrease.

• Korean Journal of Food Science and Technology
• /
• v.46 no.5
• /
• pp.566-574
• /
• 2014

This study was conducted to compare the physicochemical composition and fermentation conditions of sliced, dried radish kimchi with flying fish roe (DFFR). The levels of crude protein, crude lipid, and crude ash in DFFR were higher than those in sliced, dried radish kimchi without flying fish roe (control). DFFR also contained higher levels of Fe and Ca, compared to the control. The inosine monophosphate (IMP) content of DFFR and control was 5.63 and 2.64 mg/100 g, respectively. The polyunsaturated fatty acid and DHA contents in DFFR were approximately 5 and 23 times higher than those in the control, respectively. The major free amino acids contained in these samples were arginine, proline, alanine, leucine, and valine. The number of cells belonging to the Leuconostoc species in DFFR was higher than that in the control. In sensory evaluation studies, DFFR scored the highest in terms of appearance, flavor, taste, and texture.

• Korean Journal of Food Science and Technology
• /
• v.15 no.2
• /
• pp.141-149
• /
• 1983

The purpose of the present work is to find out the optimal conditions for the production of filefish protein preparations and to define the functional properties of the protein products. Fish protein concentrate (FPC) and fish protein isolate (FPI) were prepared by extraction of whole or headed and gutted filefish with various organic solvents. The results of the present study are as follows; 1. Among the solvents tested iso-propyl alcohol appeared to be the most effective for the extraction of lipid and also for that trimethylamine from the fish muscle. 2. The optimal extraction time showed to be 20 minutes with ethyl iso-propyl alcohol at $65-70^{\circ}C$under adequate mixing. 3. The most effective solvent ratio to the weight of fish material was proved to be 5:1 at the first extraction and to be 2:1 at the second stage. 4. The lipid content of the protein preparations reduced to below 0.5% by the third stage of extraction of headed or gutted filefish. The protein concentrate from whole fish, however, showed the lipid content of 0.27-0.31% only after the fifth stage of extration. 5. The protein contents of the protein concentrate and the protein isolate from whole filefish were 81.08% and 87.41% and the lipid contents of the two protein preparations were 0.43% and 0.45% respectively. 6. Higher calcium content was found in the protein concentrate rather than in the protein isolate. No sodium and potassium in the protein isolate were detected while the fish concentrate appeared to contain a considerable amounts of both elements. 7. The functional properties, such as suspended solids, wetability, emulsion stability and foam viscosity of the filefish protein isolates were proved to be higher than those of the protein concentrate.

• Journal of Environmental Impact Assessment
• /
• v.25 no.6
• /
• pp.514-524
• /
• 2016

The Bio-Climatic impact Assessment System, BioCAS was utilized to produce analysis maps of daily maximum perceived temperature ($PT_{max}$) and excess mortality ($r_{EM}$) over the entire Seoul area on a heat wave event. The spatial resolution was 25 m and the Aug. 5, 2012 was the selected heat event date. The analyzed results were evaluated by comparing with observed health impact data - mortality and morbidity - during heat waves in 2004-2013 and 2006-2011,respectively. They were aggregated for 25 districts in Seoul. Spatial resolution of the comparison was equalized to district to match the lower data resolution of mortality and morbidity. Spatial maximum, minimum, average, and total of $PT_{max}$ and $r_{EM}$ were generated and correlated to the health impact data of mortality and morbidity. Correlation results show that the spatial averages of $PT_{max}$ and $r_{EM}$ were not able to explain the observed health impact. Instead, spatial minimum and maximum of $PT_{max}$ were correlated with mortality (r=0.53) and morbidity (r=0.42),respectively. Spatial maximum of $PT_{max}$, determined by building density, affected increasing morbidity at daytime by heat-related diseases such as sunstroke, whereas spatial minimum, determined by vegetation, affected decreasing mortality at nighttime by reducing heat stress. On the other hand, spatial maximum of $r_{EM}$ was correlated with morbidity (r=0.52) but not with mortality. It may have been affected by the limit of district-level irregularity such as difference in base-line heat vulnerability due to the age structure of the population. Areal distribution of the heat impact by local building and vegetation, such as spatial maximum and minimum, was more important than spatial mean. Such high resolution analyses are able to produce quantitative results in health impact and can also be used for economic analyses of localized urban development.

• Korean Journal of Soil Science and Fertilizer
• /
• v.11 no.1
• /
• pp.17-24
• /
• 1978

A field experiment was conducted on a soil where habitual zinc deficiency has been observed, to investigate the effectiveness of two forms of zinc containing fertilizers: zinc enriched fused phosphate and zinc enriched compound fertilizer. The result of present study is summarized as following. 1. The sail used for the study contained relatively large amount of 1N $CH_2COONH_4$ extractable Ca and the pH was 7.03. Available Zn extracted by 0.1 HCl and available $SiO_2$ extracted by NaOAc were 3.35 ppm and 67.7 ppm respectively. 2. In control plots Zinc content of rice plant measured at 20 days after transplanting was 22-23 ppm, which was a little higher than the critical level (20ppm). But at harvesting stage it dropped to 15ppm. 3. The ratios of $P_2O_5/Zn$ and N/Zn tended to lower as the zinc applied to the soil increased. 4. Application of Zinc clearly increased the number of tillers and plant height as compared to the control. It was also observed that the plots received znic headed and matured earlier compared to the control plots by two weeks. 5. Application of zinc increased all of the yield components and the yield of rice. However, there were no statistical differences in yield and yield components among the forms and levels of zinc fertilizers.