• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2012.03a
• /
• pp.43-43
• /
• 2012

본 연구에서는 대량으로 손쉽게 구 할 수 있는 식물염료를 확보하여 새로운 천연색소자원을 탐색하기 위해서 진행되었으며, 시료의 최적 추출 조건을 확립하고 추출된 색소의 실크에 대한 염색 특성을 살펴 최적 염색조건을 설정하고, 염색견뢰도를 평가하여 수수 등겨 추출물의 천연색소로의 활용에 대한 기초 자료를 마련하고자 하였다. 수수 색소 추출 시 생산성과 편리성을 고려하여 추출은 pH 4, 추출온도 $60^{\circ}C$, 추출시간 24시간이 적정조건으로 제시되었으며, 수수 추출물에 함유되어 있는 탄닌의 최대흡수파장은 282nm로 나타났다. 견직물의 pH에 따른 염색 특성은 pH가 증가할수록 K/S값이 증가하여 염착량이 증가하였으며, 염색온도가 높을수록 염색시간이 길어질수록 염착량이 증가하는 경향을 보여주고 있다, 염색온도가 높을수록 염색시간이 경과될수록 색상은 $Y{\rightarrow}YR$로 변화되는 것을 알 수 있었으며 염색온도가 높을수록 채도가 증가하였다. 욕비가 클수록 염착량은 감소하였으나, 채도는 약간 증가하는 것을 알 수 있었다. 매염제 처리에 의한 색상변화에서는 Al, Ni 매염은 색상변화는 적었지만, Cu와 Fe 매염은 명도와 채도를 크게 감소시키고 아울러 색상도 Cu는 적갈색으로 Fe는 진회색으로 변화되었다. Sn과 Ti 매염에 의해서 명도는 약간 감소하고 채도는 약간 상승하여 연한 주황색으로 색상이 변화하였다. 설정된 조건에서 염색된 염색포의 일광견뢰도는 2~3급, 세탁견뢰도 변퇴색은 2~3급, 오염은 4~5급으로 나타났다. Fe로 매염된 염색포의 일광견뢰도는 증가하여 3~4급으로 나타났으며, 매염제 처리에 의한 세탁 견뢰도는 같거나 약간 증가되는 것으로 나타났다.

• Applied Biological Chemistry
• /
• v.51 no.3
• /
• pp.219-222
• /
• 2008

In the search for third generation herbicidal cyclic imide derivatives, the average values of herbicidal activity ($pI_{50}$) in vivo (pre-emergence) of 40 new peroxidizing herbicides, 1-(4-chloro-2-fluoro-5-propargyloxyphenyl)thiourea derivatives (1-40) against rice plant (Orysa sativa) and barnyard grass (Echinochlor crus-galli) were studied. The molecular similarity between protoporphyrinogen IX (protogen) as the substrate of protox enzyme and Urea derivatives (1-40) was discussed quantitatively. The diallyl (20) and 3-nitro substituent (33) showed the selective herbicidal activity against barnyard grass. Allyl substituent (8) and their molecular similarity in dice (S=0.81) showed the highest levels of herbicidal activity ($pI_{50}$=4.71). Also, similarity indices (S) and superimposed volume (C) of protogen and aryl-substituents (21-40) showed good correlation.

• Journal of the Korean Chemical Society
• /
• v.28 no.3
• /
• pp.155-162
• /
• 1984

Kinetic studies for the nucleophilic substitution reactions of para-substituted benzyl bromides and benzyl iodide with anilines were carried out in MeOH-MeCN mixtures at 35.0$^{\circ}$C. Hammett $ {\rho}_N,\;{\rho}_C$, Bronsted $ {\beta}$ and solvatochromic correlation coefficient a, s values were determined in order to clarify the transition state variations caused by changing nucleophiles, substituents, leaving group and solvents. The results of solvatochromic equation showed that ${\pi}^{ast}$effect was a dominant factor for the reaction systems studied. It was shown that the reaction proceeds via the dissociative $S_N$2 mechanism using the potential energy surface model approach. The potential energy surface model approach however failed to account for the transition state variation due to leaving group changes. The quatum mechanical approach showed that kinetic results were consistent with proposed dissociative $S_N$2 mechanism.

• Journal of the Korean Home Economics Association
• /
• v.41 no.1
• /
• pp.249-257
• /
• 2003

For the efficiency in extracting gromwell colorant, methanol, ethanol and aceton were used as solvents. Also, to compare the results when dyed in various conditions and on various fabrics, the ratio of water-dye mixture, pH, temperature, and varieties of fabrics -wool, silk, cotton, nylon, ramie- were selected. L, a, b, ΔE, munsell and K/S value of each sample was measured and compared for the practical use. Water-dye mixture of 5:5 ratio showed the optimum dyeability. Not to mention wool and silk, but also cotton showed a satisfying dying result at the acidity of pH4. As the temperature increased, the dyeability of all three fabrics improved greatly. Especially, wool showed the highest improvement in terms of dyeability as the temperature increased. K/S values for wool and nylon showed superior results to the others in the gromwell colorant. The resulting color turned out somewhat different depending on the solvents used and the sort of fabric that was tested on. When the gromwell colorant extracted with methanol or ethanol was applied, the color of fabrics came out as purple or purpleblue. When the colorant extracted with acetone was used, the color of fabrics came out to be redpurple. The colorfastness to light showed low glades regardless to whichever solvents were used. The grades of colorfastness to laundering were recorded low numerical values, and its record became even lower when the gromwell colorant extracted with aceton was applied. The staining grade of the colorfastness to laundering showed a good grade in the range of 4 to 5. All the dyed fabrics showed a excellent drycleaning fastness.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2011.03a
• /
• pp.37-37
• /
• 2011

열가소성 고분자 물질인 PET[poly(ethylene terephthalate)]는 섬유 및 필름, 음료병 등에 널리 사용되는 대표적인 범용 소재이며, 전체 PET 제조업은 2013년 약 200억불에 달할 것으로 예상되는 큰 시장이다. 최근 급격한 산업화에 따른 전 세계적인 환경오염의 심각성이 부각되면서 기업들의 환경 친화적인 제조 활동 및 생산 프로세스의 개선이 요구되고 있다. 현재 폴리에스테르 수지를 제조하기 위해 국내외 업체에서 가장 널리 사용 되고 있는 중합촉매는 중금속 원소인 고순도 삼산화안티몬($Sb_2O_3$)이며 통상 중합공정 중에 150~300ppm의 촉매가 사용된다. 세계보건기구(WHO)의 국제암연구기관(IARC)에서는 안티몬을 인체 발암성이 있는 물질로 분류 하여 현재 유럽을 중심으로 안티몬 사용을 제한하는 환경 규제가 가속화 되고 있다. 폴리에스테르 수지 제조 공정중 안티몬 촉매를 사용할 경우 정련, 염색, 알칼리 감량시 중금속(안티몬)검출에 따른 수질 오염 및 폐수처리비용이 증가하게 되며 대량의 중합촉매 사용에 따른 이물 증가로 작업성 및 품질 문제가 상존하게 된다. 따라서 이러한 제조 공정중의 고위험성 물질을 대체할 친환경, 고부가가치 신규 무독성 PET 소재 및 제품이 각광을 받게 될 것이다. 이번 연구에서는 티타늄계(Ti-based) 무독성 촉매를 이용하여 PET 중합을 실시한 Sb-free PET원단의 염색특성을 알아보는 것으로 분산염료 3종 (Red, Yellow, Blue)으로 염색이 완료된 원단을 spectrophotometer 를 이용하여 L, a b값과 K/S값으로 측정하였다. 동일한 염색 조건을 위해 두 종류의 원단을 하나의 실린더에서 기존 PET 염색과 동일한 조건으로 염색을 실시하였으며 실험 결과 전반적으로 기존 PET와 유사한 염색 특성을 보였다. 염색견뢰도 평가에서도 Sb-free PET원단과 기존 PET원단의 세탁 견뢰도, 마찰 견뢰도, 일광 견뢰도를 비교 했을 시 두 원단 모두 4~5급으로 우수한 견뢰도를 나타내었다.

• Journal of Digital Convergence
• /
• v.16 no.12
• /
• pp.593-602
• /
• 2018

The purpose of this study was to investigate the coloring properties of non-mordant dyes by examining local literature on silk fabric dyeing using red-colored natural dyes. Natural dyes can be prepared from the following 8 materials: purple-fleshed sweet potato, Impatiens balsamina, mulberry, fruits of Ligustrum japonicum Thunb, guava leaves, dansam, hibiscus flowers, and pruned branches of Prunus persica. To examine the surface color calculated $L^*$, $a^*$, $b^*$, ${\Delta}E^*$, and K/S value and H V/C. The variables considered in the dyeing experiment were dye concentration, dyeing temperature, dyeing time, and number of dyeing iterations, which were varied to evaluate the dyeing properties and color characteristics. As a result, the abovementioned variables, dye affinity, and red color expression were directly proportional to one another. In this study, it was found that red coloring can be obtained with natural dyes; moreover, excellent dyeing was achieved without the need for repeated dyeing or mordanting processes, which cause environmental pollution.

• Journal of Sericultural and Entomological Science
• /
• v.47 no.1
• /
• pp.31-35
• /
• 2005

This study had done to find an easily-dyeing method for novices because the dyeing method of traditional indigo has not been general to the public so that only an expert could dye the fibers. The results are as the following. When the powders after burning the shell of cockle (tegillarca granosa) were added. pH of the solution was 12.35 The k/s value of 2.49 was the highest in the dye after dipping in the solution of indigo for 1-2 days and the k/s value was 3.10 when adding 20 g/l of the starch (55% corn-starchy products in Korean market) into the solution of indigo. In addtion, the k/s value was the highest when fermenting temperature was $30^{\circ}C$ and when the powders after burning the cockle shell were 4 g/l. There were no differences between water and lye of rice straw which had used for the ferment of indigo. The components of two dye which has traditionally made of the cockle shell and which has made of calcium hydroxide were all the same.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2011.03a
• /
• pp.34-34
• /
• 2011

PET/면, 나일론/PET, 나일론/면 등 다양한 복합섬유소재를 염색하기 위해서는 복합섬유소재를 구성하는 각각의 섬유소재에 따라 적합한 염료를 선정하고 그에 맞는 염색방법을 사용하여 진행되고 있다. 하지만 이런 경우 색상과 견뢰도 등의 물성을 맞추기 위한 복잡한 염색공정 및 긴 염색시간에 의한 생산비용 상승 등 여러 문제점이 있다. 이러한 문제점을 해결하기 위해 하나의 염료를 이용하여 다양한 섬유를 염색하는 방법에 대한 많은 연구가 이루어지고 있다. 새로운 염료합성의 경우 섬유와 결합할 수 있는 반응기를 분산염료구조에 도입하여 염색조건에 따라 다양한 섬유를 염색할 수 있는 universal dye의 개발에 초점이 맞추어져 있다. 반응성염료와 분산염료의 특성을 동시에 만족시키기 위한 일환으로서 염료의 분자 구조 내에 상기의 염료특성을 동시에 발휘하는 소위 "반응성 분산염료"의 개발이 이에 속한다. 본 연구의 목적은 화학구조가 다른 네 종류의 sulphatoethylsulphone기를 갖는 반응성분산염료들을 합성하고 이들의 나일론, PET, 면 및 교직물에 대한 염색성을 분석하는 것이다. 면 섬유에 대한 Dye 1~4의 염색온도에 따른 염색성을 살펴보면, 각 염료들의 염색성은 염색온도에 따라 큰 영향을 받고 있음을 알 수 있으며, Dye 1, 4는 염색온도가 높을수록 K/S 값이 증가하고 Dye 2, 3은 염색온도가 낮을수록 K/S 값이 증가함을 알 수 있다. Nylon에 대한 Dye 1의 염색속도는 pH 4 > pH 5 > pH 8 > pH 7 > pH 6의 순서로 나타나 pH 6에서의 염착 평형이 pH 4보다 40분 정도 늦게 도달하였다. 나일론과 PET의 동욕염색에 있어 Dye 1은 나일론의 경우 초기부터 빠른 흡착을 보이며 $100^{\circ}C$가 되는 60분에는 K/S값이 16에 도달하여 염착 평형에 근접한 것을 알 수 있으며, PET는 $100-200^{\circ}C$ 사이에서 염색속도가 빨라지며 본격적으로 흡수하였다. N/C 교직물에 대한 Dye 2, 3의 빌드업성은 두 염료 모두 염료농도의 증가에 따라 K/S 값 역시 선형적으로 증가하는 것으로 나타났다. 나일론 섬유는 네 가지 염료로 우수하게 염색되었고, 면 섬유는 수용성기를 가진 Dye 2와 3, 그리고 PET 섬유는 소수성이 높은 Dye 1과 4가 적합하였다. N/P 및 N/C 교직물의 염색에 있어 나일론 성분으로 염료가 더 많이 흡착하여 나일론섬유가 더 진하게 염색되지만 교직물의 직물조직에 의하여 표면과 이면은 각각 거의 동색으로 보였다.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.30 no.2 s.150
• /
• pp.275-285
• /
• 2006

The purpose of this study was to examine the change of dyeing ability by K/S values, when dyed in different twisting processes and by one bath system and two bath system, to find possible ways of minimizing the color difference between cotton and polyester in composite yarn. The two types of composite yarn, which had one setting process(CP1) and two setting processes(CP2) were dyed with reactive/disperse dyes in both one bath dyeing system and two bath system. The dyeing ability according to the two different twisting processes was measured, and the values of the CP1 were higher compare to the values of CP2 in both one and two bath dyeing systems. This is because CP1 applied only one setting could shrink dyeing process at 130$^{circ}C$. This shrinkage increased the number of twists in the unit length and increased the yarn density, and this is the reason that the K/S values were measured higher than those of CP2. In wet shrinkage test, in opposition to CP2 only had 0.76$\%$ of the shrinkage rate, CP1 had 3.00$\%$ of the shrinkage rate. Also, the dyeing ability according to the two different dyeing methods was measured, and the values of CP1 and CP2 were both higher when dyed in two bath system. On the other hand, the color differences between cotton and polyester in composite yarns, were smaller for CP2 than that for CP1 and were also smaller in two bath dyeing system than in one bath dyeing system. Therefore, the ways of minimizing color difference between cotton and polyester in composite yarn are to apply enough setting in order to minimize shrinkage in dyeing process and to choose two bath dyeing system.

• The Korean Journal of Nuclear Medicine
• /
• v.29 no.1
• /
• pp.54-60
• /
• 1995

Medical Internal Radiation Dose(MIRD) schema was developed for calculating the absorbed dose from the administered radiopharmaceuticals. With the biological distribution data and the physical properties of the radionuclide we can estimate the absorbed dose by the MIRD schema. For the thyroid cancer patients received $^{131}I$ therapy, the absorbed dose to the bone marrow is the limiting factor to the administered dose, and the duration of admission is deter-mined by the retained activity in the whole body. To monitor the whole body radioactivity, we used Eberline Smart 200 system using ionization chamber as a detector. With the time activity curve of the whole body, total body residence time was obtained. From the ICRP publication 53, the residence times of the source organs, such as kidney, urinary bladder content and stomach, were used to calculate the absorbed doses of the target organs, such as stomach, red marrow, bladder wall and remaineder total body. In 8 thyroid cancer patients with 175 mci of $^{131}I$ administered orally, the mean absorbed dose in the bladder wall was 375.1, in the stomach 285.1, red marrow 25.4 and total body 22.4 rad respectively. For the monitoring of the large administered activity, this method seemed to be quite useful.