• 제목/요약/키워드: K/Ka band

검색결과 195건 처리시간 0.032초

21GHz 대역 스케일러블 위성방송 시스템 구현 (A Scalable Satellite Broadcasting System in 21GHz Band)

  • 김동환;정법기;이우근;김승철;장태규
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2008년도 학술대회 논문집 정보 및 제어부문
    • /
    • pp.302-303
    • /
    • 2008
  • 본 논문은 21GHz 대역의 위성방송 서비스의 품질을 보장하기 위하여 스케일러블 위성 방송 시스템을 제안하였다. 제안한 시스템은 비디오 스트림을 기본 계층과 향상 계층의 두 계층으로 분할하여 Ku 대역과 Ka 대역으로 각각 나누어 전송한다. 이에 스케일러블 위성방송 시스템은 강우로 인하여 Ka 대역의 채널을 사용할 수 없을 때에도 기본 계층의 스트림을 사용하여 기본적인 품질을 유지할 수 있다. 본 논문에서는 H.264/SVC를 적용하여 스케일러블 위성방송 시스템을 구현하였고, 이의 동작을 검증하기 위하여 Bartlett-Lewis Pulse 모델을 사용하여 강우 감쇠를 시뮬레이션 하였다.

  • PDF

$0.18-{\mu}m$ CMOS공정을 이용한 Ka 대역 근거리 무선통신용 전력증폭기 설계 (Ka-band Power Amplifiers for Short-range Wireless Communication in $0.18-{\mu}m$ CMOS Process)

  • 허상무;이종욱
    • 대한전자공학회논문지SD
    • /
    • 제45권4호
    • /
    • pp.131-136
    • /
    • 2008
  • [ $0.18-{\mu}m$ ] CMOS공정을 이용하여 근거리 무선통신(22-29 GHz)에서 응용할 수 있는 전력증폭기를 설계하였다. 전도성 기판에 의한 손실을 줄이기 위해서 기판 차폐된 두 가지 형태의 전송선로를 설계하고, 40 GHz 까지 측정 및 모델링하였다. 기판 차폐 microstrip line (MSL) 전송선로의 경우 27 GHz에서 약 0.5 dB/mm의 삽입손실을 나타내었다. 기판 차폐 MSL 구조를 이용한 전력증폭기는 0.83$mm^2$의 비교적 작은 면적을 차지하면서도 27 GHz에서 14.7 dB의 소신호 이득과 14.5 dBm의 출력을 나타내었다. 기판 차폐 coplanar waveguide (CPW) 전송선로의 경우 27 GHz에서 약 1.0 dB/mm 삽입손실을 나타내었으며, 이를 이용한 전력증폭기는 26.5 GHz에서 12 dB의 소신호 이득과 12.5 dBm의 출력을 나타내었다. 본 논문의 결과는 $0.18-{\mu}m$ CMOS공정을 이용한 저가격의 근거리 무선통신 시스템을 구현할 수 있는 가능성을 제시한다.

KVNCS: 2. The Fringe Survey of New Candidates for VLBI Calibrators in the K Band

  • Jeong Ae Lee;Taehyun Jung;Bong Won Sohn;Do-Young Byun
    • 천문학회지
    • /
    • 제56권2호
    • /
    • pp.159-168
    • /
    • 2023
  • The main goal of the Korean VLBI Network Calibrator Survey (KVNCS) is to expand the VLBI calibrators catalog for KVN, KaVA (KVN and VERA Array), EAVN (East-Asian VLBI Network), and other extended regions. The second KVNCS (KVNCS2) aimed to detect VLBI fringes of new candidates for calibrators in the K band. Out of the 1533 sources whose single-dish flux density in the K band was measured with KVN telescopes (Lee et al. 2017), 556 sources were observed with KVN in the K band. KVNCS2 confirmed the detection of VLBI fringes of 424 calibrator candidates over a single baseline. All detected sources had a high Signal-to-Noise Ratio (SNR) of >25. Finally, KVNCS2 confirmed 347 new candidates as VLBI calibrators in the K band, resulting in a 5% increase in the sky coverage compared to previous studies. The spatial distribution was quasi-uniform across the observable region (Dec. > -32.5°). In addition, the possibility as calibrator candidates for the detected sources was checked, using an analysis of the flux-flux relationship. Ultimately, the KVNCS catalog will not only become the VLBI calibrator list but is also useful as a database of compact radio sources for astronomical studies.

마이크로웨이브 광대역 수신단 구성을 위한 재구성 주파수 혼합기 설계 (Design of Reconfigurable Mixer for Microwave Broadband Receiver)

  • 김재현;조윤현;김상욱;고민호;박효달
    • 한국전자파학회논문지
    • /
    • 제26권6호
    • /
    • pp.533-539
    • /
    • 2015
  • 본 논문은 레이더용 마이크로웨이브 광대역 주파수 대역에서 동작하는 수신단 구성을 위한 재구성 주파수 혼합기를 설계 및 제작하였다. 제안한 주파수 혼합기는 역병렬 다이오드(anti-parallel diode)를 사용하였고, 제어 전압 유무에 따라 기본파 혼합기 또는 부고조파 혼합기로 동작한다. 제작한 주파수 혼합기는 제어전압이 인가된 기본파 혼합 모드에서 X-대역/ Ku-대역으로 동작하고, -10 dB 변환손실, 2.0 dBm P1dB 특성을 나타내었다. 부고조파 혼합모드에서는 Ka-대역으로 동작하고, -17 dB 변환손실, 2.0 dBm P1dB 특성을 나타내었다.

다중 대역 레이더 탐지기용 광대역 주파수 체배 VCO 구현에 관한 연구 (A Study on the Realization of Broadband frequency Multiple VCO for Multi-Band Radar Detector)

  • 박욱기;강석엽;고민호;박효달
    • 한국통신학회논문지
    • /
    • 제30권10A호
    • /
    • pp.971-978
    • /
    • 2005
  • 본 논문에서는 X/K/Ka 대역 레이더 탐지기(RD : Radar Detector)에 사용 가능한 주파수 체배기를 이용한 전압제어 발진기(VCO : Voltage Controlled Oscillator)를 설계 제작하였다. 기존 레이더 탐지기에 사용된 VCO는 좁은 대역폭과 느린 주파수 가변 속도, 높은 주파수로 인한 양산성의 불안정 등 문제점이 있었다. 이 모든 단점을 개선한 주파수 체배기를 이용한 VCO를 설계 제작하였다. 연구된 주파수 체배 VCO는 측정 결과 발진 주파수는 11.27 GHz, 그때의 출력 전력은 3.64 dBm이며, 바랙터 다이오드에 인가되는 제어 전압을 0 V에서 4.50 V까지 가변 하였을 때 660 MHz의 넓은 주파수 동조 범위를 보였다. 또한 1 MHz의 옵셋 주파수에서 -104.0 dEc의 위상잡음 특성을 나타내어 상용 목적에 적합한 성능을 얻었다.

전압제어 유전체공진을 이용한 K-대역 발진기 설계에 관한 연구 (A study on the design of a K-band harmonic oscillator using voltage controlled dielectric resonance)

  • 전순익;김성철;은도현;차균현
    • 한국통신학회논문지
    • /
    • 제21권12호
    • /
    • pp.3215-3226
    • /
    • 1996
  • In this paper a K-band harmonic oscillator competitive to ordinary Push-Push type oscillators is introduced. This oscillator is composed of two-X-band dielectric resonance circuits. To favor its harmonic generation, the load effect and the bias effect are studied to allow the maximum harmonic distortion. As results, the dielectric resonated load and the class A bias are used for the 2nd harmonic generation. analytical study for modelling of voltage controlled dielectric resonator is carried out with theoretical background. The performance of the circuit is evaluated by simulation using harmonic balanced method. The novel structure has ont only a voltage tuning circuit but also an output port at fundamental frequency as the function of prescaler for phase lockede loop application on the just single oscillation structure. In experimentation, the output freqneyc of the 2nd harmonic signal is 20.5GHz and the maximum power level of output is +5.5dBm without additional post amplifiers. the harmonic oscillator exhibits -30dBc of high fundamental frequency rejection without added extra filters. The phase noise of -90dBc/Hz at 100kHz off-carrier has been achieved under free running condition, that satisfies phase noise requirement of IESS 308. The proposed oscillator may be utilized as the clean and stable fixed local oscillator in Transmit Block Upconvertor(TBU) or Low oise Block downconvertor(LNB) for K/Ka-band digital communications and satellite broadcastings.

  • PDF

위성통신에서 강우 감쇠 보상을 위한 UEP 방식의 계층적 부호화 방식 (Hierarchical Channel Coding Scheme Using UEP Method for Rain-Attenuation Compensation in Satellite Communication)

  • 정지원
    • 한국전자파학회논문지
    • /
    • 제17권9호
    • /
    • pp.795-803
    • /
    • 2006
  • 본 논문에서는 Ka 대역 초고속 위성 방송 시스템에서 강우 감쇠에 대처하면서 가입자에게 지속적으로 방송을 제공하기 위해 unequal error protection(UEP) 방식을 이용한 계층적 부호화 방식에 대한 연구를 하였다. 신호의 중요도에 따라 변조 방식 및 채널 코딩 방식을 달리하는 time sharing 방식과 달리 하나의 변조 방식을 이용하여 성상도 위치에서 신호의 중요도에 따라 신호간의 최소 거리를 다르게 배치하는 UEP 방식에 대한 구조 및 성능을 분석하였으며, 성능 분석을 토대로 최적의 방식을 제시하였다.

LRIT DESIGN OF COMS

  • KOO In-Hoi;PARK Durk-Jong;SEO Seok-Bae;AHN Sang-Il;KIM Eun-Kyou
    • 대한원격탐사학회:학술대회논문집
    • /
    • 대한원격탐사학회 2005년도 Proceedings of ISRS 2005
    • /
    • pp.305-308
    • /
    • 2005
  • The COMS, Korea's first geostationary multipurpose satellite program will accommodate 3 kind of payloads; Ka-Band communication transponder, GOCI (Geostationary Ocean Color Imager), and MI (Meteorological Imager). MI raw data will be transferred to ground station via L-band link. The ground station will perform image data processing for raw data, generate them into the LRIT/HRIT format, the user dissemination data recommended by the CGMS. The LRIT/HRIT are disseminated via satellite to user stations. This paper shows the COMS LRIT data generation procedure based on COMS LRIT specification and its verification results using the LRIT user station.

  • PDF