• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1998.06a
• /
• pp.415-418
• /
• 1998

The maleate copolyrner($C_{18}MA-VE_2$) is used as sensitive materials and deposited on the slide-glass substrates at room temperature using Langmuir-Blodgett(LB) method. The results of current-time(1-t) measurements are performed to investigate the gas-detection characteristics of the sensitive LB films in the presence of organic gases just as chloroform, acetone, ethanol, methanol using the apparatus for the gas-detection measurement. Several interesting responses are observed at room temperature, such as reversible response, sensitivity and response time. Response time and sensitivities are evaluated 160~220[sec], minimum 6[times], maximum 70[times] for each organic gas by adsorption and penetration of the organic gases in the relation concentration of 100[%], respectively.

• Journal of Engineering Education Research
• /
• v.27 no.2
• /
• pp.25-34
• /
• 2024

Due to the Covid-19 pandemic, it seems to have been impossible to run offline training courses. To overcome this situation, online training courses has been emerged. Just moving the educational environment from offline to online instead of re-designing the curriculum, however, is not effective for trainees. To maximize educational effectiveness, it is necessary to re-design the curriculum based on constructivist appoach which gives trainees experience on skills and knowledge about their job. As for re-designing the curriculum into real-time online practical learning based on constructivism, learning satisfaction and work efficacy of trainees may have been increased. From these results, HRD professionals in an IT company should need to consider how to structure the curriculum when they design the real-time online practical learnings.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.11 no.3
• /
• pp.182-188
• /
• 1991

With a purpose of finding out the effects of cattle slurry applicatioin on the dry matter yield, yield component, and botanical composition in the mixed sward, a field experiment was conducted with two times and five levels of cattle slurry application. The experimental field was laid.out in a split-plot design with three replications, and lasted from September. 1986 to October, 1990 at the Livestock Experiment Station in Suweon, The results obtained are summarized as follows: 1. At each harvest time, the plant growth of the plots with cattle slurry application was slightly worse when compared to dressing of mineral fertilizer. 2. Average dry matter yield for 4 years was not significantly different between the slurry application times, just after cutting, and 15 days after cutting, The DM yield in the plot with cattle slurry 30 m!/ha and mineral fertilizer(9,095 kg/ha) and with cattle slurry 60 m1/ha and mineral fertilizer(8, 987 kg/ha) were decreased by 8% and 10% than that of the plot with mineral fertilizer application(9,937 kg/ha), respectively. 3. The DM yield component of the plots with cattle slurry application just after cutting was much better when compared to manuring 15 days after cutting. And it was much better in the plot with cattle slurry 60 m"/ha and mineral fertilizer which was composed of 73.8% grasses(6.636 kg/ha). 24.6% legumes (2,207 kdha) and 1.6% weeds(144 kdha). 4. In general, the botanical composition was relatively good in the plots with slurry application just after cutting. Grassland vegetation of the plots with cattle slurry 60 m"/ha and mineral fertilizer was changed into much better botanical composition with 66.8% grasses, 30.2% legumes and 3. 1% weeds at the end of the experiment.xperiment.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.15 no.5
• /
• pp.13-18
• /
• 1978

A delay switching PLL (DSPLL) is proposed for improvement of the frequency acquisition Performance (pull-in range) while keeping a narrow bandwidth LPF. It has, between the phase detector and the LPF, just a simple RC delay circuit, a switch and another phase detector controlling the switching time. For the common second order PLL, the pull-in capability of the DSPLL is analyzed approximately, without considering additive white noise effect, and verified experimentally. It is shown that the delay switching extends the pull-in range significantly, as much as a half of lock-range. At the phase tracking mode, the delay switching does not function, to make the DSPLL be a normal PLL.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2000.09a
• /
• pp.397-406
• /
• 2000

Hopkinson effect in the HDDR-treated Nd$\sub$15/Fe$\sub$77/B$\sub$8/ alloy was examined in detail by means of a thermomagnetic analysis with low magnetic field (600 Oe). The emergence and magnitude of maximum in magnetisation in the thermomagnetic curve due to the Hopkinson effect was correlated to the grain structure and coercivity of the HDDR-treated material. the HDDR-treated materials showed clear Hopkinson effect (maximum in magnetisation just below the Curie temperature of the Nd$\sub$2/Fe$\sub$14/B phase) on heating in the thermomagnetic curve. Magnitude of the magnetisation rise due to the Hopkinson effect became smaller as the recombination time increased. The magnetisation recovery at room temperature on cooling from above the Curie temperature became smaller as the recombination time increased. The HDDR-treated materials with shorter recombination time, finer grain size and higher coercivity showed larger magnetisation maximum due to Hopkinson effect in the thermomagnetic curve.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.1
• /
• pp.34-39
• /
• 2005

In this paper, we propose a new prioritized Optical Burst Switching (OBS) protocol based on a hop count, which can provide an efficient utilization in optical Wireless networks. Under several legacy schemes, a switch drops the burst with a shorter time among ones regardless of its traversed hop count. As a result, the dropped burst that have been traversed more hops might cause to waste bandwidth than the one traversed a few hops. Noting that this problem, we propose the Just Enough Time(JET) with a hop count scheme which can reduce the wasted bandwidth by prioritizing the burst traversed more hops over others. From the simulation result, we show that the proposed scheme is advantageous over the legacy schemes in terms of the burst blocking probability and the link utilization.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.24 no.2
• /
• pp.187-207
• /
• 2019

In order to develop a high performance ocean model, we used Julia, a Just-In-Time compile language, and to obtain the solution of the momentum equation, we made the code to solve the Poisson equation by the Successive Over-Relaxation method. And then we made two models to test Julia calculation codes. First, a simple channel form is modeled to test constant source/sink conditions. Second, the simplified Yellow Sea was modeled to test tidal forcing, Coriolis forces, and the effect of vertical eddy diffusivity coefficients. The model has been tested with a total of eight cases in the two scenarios. As a result of the test, the depth-averaged current speed of the three cases in Scenario 1 converged perfectly to the theoretical value, and that showed well a vertical flow velocity gradient due to the bottom friction. Also, the result of Scenario 2 represented well the amphidromic points of Yellow Sea and the tidal characteristics of mid-western and southwestern coast of Korea. Therefore, it is considered that the ocean model using Julia language has developed successfully, this suggests that the ocean model has come to the stage of successful transition from a classical compile language to a Just-In-Time compile language.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.23 no.2
• /
• pp.83-101
• /
• 1998

Assembly U-lines are increasingly accepted in industry, especially just-in-time production systems, for the efficient utilization of workforce. In this paper, we present an integer programming formulation and a branch-and-bound method for balancing the U-line with the objective of minimizing the number of workstations with a fixed cycle time. In the mathematical model, we provide the method that can reduce the number of variables and constraints. The proposed branch-and-bound method searches the optimal solution based on a depth-first-search. To efficiently search for the optimal solutions to the problems, an assignment rule is used in the method. Bounding strategies and dominance rules are also utilized. Some problems require a large amount of computation time to find the optimal solutions. For this reason. some heuristic fathoming rules are also proposed. Extensive experiments with test-bed problems in the literature are carried out to show the performance of the proposed method. The computational results show that our method is promising in solution quality.

• Journal of Welding and Joining
• /
• v.16 no.1
• /
• pp.98-105
• /
• 1998

The accuracy of the finite element method depends upon the mesh that is used in the analysis. The temperature around the arc is higher than the melting point of the materials, and it drops sharply in the regions just away from the arc. This requires an extremely fine mesh in the confined high temperature region to predict the temperature accurately in that region. But the computational time increases with the fineness of mesh. Since fine mesh is required only around the arc source, adaptivity of the input mesh according to the position of the arc source is efficient. The remeshing technique gives a fine mesh in the high temperature region around the arc and a coarse mesh in other region at any time step. With this it is possible to achieve desired accuracy with less computation time. In this study a transient adaptive mesh, remeshing technique, is developed and calculated temperature for a sample problem.

• Journal of Magnetics
• /
• v.6 no.2
• /
• pp.61-65
• /
• 2001

The Hopkinson effect in the HDDR-treated $Nd_{15}Fe_{77}B_8$ allay was examined in detail by means of a thermo-magnetic analysis with low magnetic field (600 Oe). The emergence and magnitude of maximum in magnetisation in the thermomagnetic curve due to the Hopkinson effect was correlated with the grain structure and coercivity of the HDDR-treated material. The HDDR-treated materials showed a clear Hopkinson effect (maximum in magnetisation just below the Curie temperature of the $Nd_2Fe_{14}B\;$ phase) on heating. The magnitude of the magnetisation rise due to the Hopkinson effect became smaller as the recombination time increased. The magnetisation recovery at room temperature on cooling from above the Curie temperature became smaller as the recombination time increased. The HDDR-treated materials with shorter recombination time, finer grain size and higher coercivity showed larger magnetisation maximum due to the Hopkinson effect in the thermo-magnetic curve.