• Korean Journal of Food Science and Technology
• /
• v.26 no.4
• /
• pp.436-441
• /
• 1994

To investigate the lowering effects of in vitro enzymatic hydrolysis by the treatment of chymotrypsin, trypsin, pancreatin, or protease from Aspergillus oryzae on the antigenicity of whey protein isolate (WPI) against rabbit anti ${\alpha}-LA$ antiserum, competitive inhibition ELISA (cELISA) and passive cutaneous anaphylaxis (PCA) test using guinea pig were performed. The results of cELISA showed that the monovalent antigenicity of the whey protein hydrolysates (WPH) to the antiserum was decreased to $10^{-2.5}-10^{-5.5}$ and less by the hydrolysis. The monovalent antigenicity of the WPH hydrolyzed by trypsin, or protease from Asp. nryzae was much lowered by the pretreatment of heat denaturation. The antigenicity of the WPH hydrolyzed by chymotrypsin, trypsin, or pancreatin was much lowered by the pretreatment of pepsin. Especially, the antigenicity of TDP (trypic hydrolysate with pretreatment of heat and pepsin) was found almost to be removed. However, there was not consistency between degree of hydrolysis(DH) and the monovalent antigenicity of the WPH. By the heterologous PCA it was found that all of the PGPH lost the polyvalent antigenicity regardless of the pretreatments although WPI and ${\alpha}-LA$ had the positive high antigenicity. The results suggested that the peptides derived from ${\alpha}-LA$ in WPH could bind specific antibodies but they could not induce allergy. Therefore, it was elucidated that the allergenicity of ${\alpha}-LA$ in whey protein could be destroyed easily by the enzymatic hydrolysis.

• Korean Journal of Food Science and Technology
• /
• v.37 no.6
• /
• pp.882-888
• /
• 2005

Procedure for analysis of methylmercury in fish was developed, involving addition of HCl, extraction with toluene, and clean-up using L-cystein solution. Obtained extract is analyzed by gas chromatography with electron capture detector using Ulbon HR-Thermon-Hg column. Detection limit and recovery of the method were 0.005mg/kg (expressed as Hg), 98-107 (103%), respectively. Total mercury and methylmercury concentrations in 175 commercial fish samples ranged from [mean-max (mean), unit: mg/kg]: 0.014-1.200 (0.270) and 0.006-0.901 (0.168) in tuna-fish, 0.020-0.934 (0.323) and 0.012-0.553 (0.149) in martin-fish, 0.082-0.782 (0.391) and 0.040-0.436(0.201) in shark, 0,023-0.031 (0.026) and 0,013-0.018 (0.015) in salmon, 0.098-0.193 (0.133) and 0.031-0.015(0.090) in tilefish, and 0,031-0.214 (0.089) and 0.016-0.093 (0.042) in canned tuna respectively. No sample of analyzed fish exceeded 1.0mg/kg wet wt., limit for methylmercury established by Codex. In all species examined, estimated weekly intake was lower than Provisional Tolerable Weekly Intake recommended by the JECFA (the Joint FAO/WHO Expert Committee on Food Additives).

• Journal of Wetlands Research
• /
• v.9 no.3
• /
• pp.1-12
• /
• 2007

In this study, the correlation of organic content with particle size and type of sediment was found out.Particle size, stratigraphic section and organic content of sediments sampled from Dalpo wetland was analyzed. Dalpo wetland consists of three wetlands, and the area of Dalpo wetland is about $31,295m^2$. The particle size analyses for sampled sediments of 7 points (3 points in wetland A, 3 points in wetland B and 1 point in wetland C) were tested. As results of the particle size analyses, the sediment particle size becomes larger as to the edge of the wetland. It is revealed in order of wetland A > wetland C > wetland B. Borehole surveys with horizontal distance in the major and minor axes of wetland A, the major and minor axes of wetland B and the major axis of wetland C were accomplished. Clayey peat deposit is distributed at 10~90 cm depth below ground surface in the major axis of wetland A. The clayey peat deposit was the most thick at the center of wetland A that horizontal distance is 100 m. As the depth below ground surface of clayey peat deposit is less than 27 cm in the wetland B, we can infer that the life for the wetland B is being finished. Sediment composition of wetland C is simple because wetland C is small scale, and clayey peat deposit is distributed at 10~34 cm depth below ground surface. Sediment sampled by borehole survey in the Dalpo wetland was cut at interval of 10 cm, then organic content was analyzed. Organic content of wetland A sediment showed more than 40% until 70 cm depth below ground surface, also sediment of wetland B is similar to wetland A until 10 cm depth below ground surface, but is showed within 20 % above 30 cm depth below ground surface. Organic content of wetland B is showed the lowest as organic content near the ground surface is about 40%. All of the three wetlands, organic content is showed higher at clayey peat deposit near to ground surface. This is caused by finer particles of the clayey peat deposit, also organic materials were supplied from dead vegetation. Organic content of the Dalpo wetland showed in order of wetland A > wetland C > wetland B. This result is caused by thickness of clayey peat deposit in sediment. Through this study, it was verified that organic content of the Dalpo wetland sediment was dominated by particle size of sediment and vegetation of the upper part.

• Korean Journal of Medicinal Crop Science
• /
• v.4 no.4
• /
• pp.301-307
• /
• 1996

The experiment was conducted to clarify the effect of water stress treatment on growth character of Ligusticum chuanxiong Hort. The water stress treatment was imposed artificially on seedling, flowering and rhizome enlargement stage of the plant. The decrease ratio of leaf area compare with control decreased to 24.4% by water stress treatment at seedling stage and to 41.6% at rhizome enlargement stage. The reduction rate of chlorophyll content at the end of water stress treatment was 41.2% at the see­dling stage and no difference at the flowering stage. The chlorophyll content of water stress treatment on seedling and flowering stage was recovered to 95% at harvest time. The ratio of rootlet distribution from top soil to l0cm depth showed maximum to 90% at the seedling stage and to 20cm depth showed max­imum to 6.4% at the rhizome enlargement stage. The dry weight of rootlet was decreased to $19.3{\sim}40.3%$ by water stress treatment. Dry weight of aerial part and underground part of the plant decreased in the order of seedling, flowering, rhizome enlargement and control and the dry weight of aerial part decrease more severely than underground part.

• Journal of Korean Ophthalmic Optics Society
• /
• v.19 no.4
• /
• pp.479-485
• /
• 2014

Purpose: This study relates to the development of the prism dot-sight combined with the thermal imaging camera. Methods: We have placed a reflector designed to the doublet type in the front of a BS (beam splitting) prism, have placed an OLED panel and a dot reticle generator to the top and bottom of the reflecting surface of the BS prism, and have placed a detachable magnifier between the BS prism and the observer by which the observer can see the magnified image of the OLED panel. By doing this, we were able to configure the new type prism dot-sight combined with the thermal imaging camera. Results: By placing the removable magnifier designed with a new type between the BS prism and the observer, we could design the new type prism dot-sight which performs the role of the dot sight by removing the magnifier during the day-time, and performs the role of the night scope during the night-time by which we can observe the enlarged image of the thermal imaging camera through the BS prism by attaching the removable magnifier. Conclusions: In this study, we have developed the prism dot-sight combined with the thermal imaging camera which is able to play the role of the day or night scope selectively, by disposing the designed magnifier characterized by the focal length of 44 mm, the viewing angle of ${\pm}7.0^{\circ}$, and the MTF value of 0.5 or more at the criterion of 50 lp/mm and the 0.7 field between the BS prism and the observer. By doing so, we could design and fabricate the new type prism dot-sight combined with the thermal imaging camera which can further increase the rapidity of firing and provide more convenience in the mounting of a firearm than the detachable combination of an existing dot sight and an existing night scope.

• Clinical and Experimental Pediatrics
• /
• v.45 no.5
• /
• pp.629-636
• /
• 2002

Purpose : Our study was aimed to investigate the characteristics of seizures as well as to determine whether the expression of neuronal nitric oxide synthase expression(nNOS) of hippocampus has an affect in the hyperthermic seizure in developing rat. Methods : Hyperthermic seizures were repeatedly induced twice a week for four weeks in 20-day old Spraque-Dowley rats. Fifty two rats were used as a hyperthermic group and 30 rats used as a normothermic control group. Hyperthermic seizures were induced in a water bath at $45^{\circ}C{\pm}1$ for 4 min. The characteristics of seizures were recorded. Using western blot, hippocampal nNOS expression was measured in normothermic control, hyperthermic non-seizure, and hyperthermic seizure groups, respectively. Results : Eighty seven percent of hyperthermia exposed rats showed generalized tonic-clonic seizure most frequently. The duration of seizure was ranged from 12 to 145 sec(mean 55 sec) and the latency to seizure ranged from 158 to 240 sec(mean 204 sec). The duration of seizure was prolonged but there was no significant difference in the seizure latency as the rat exposed more number of hyperthermia. Interestingly, the expression level of hippocampal nNOS in hyperthermic seizure and hyperthermic non-seizure groups was not different from each other, however, the expression in these groups was lower than that of the control group. Conclusion : Our results indicate that nNOS do not have an affect in this repeated hyperthermic seizures. Further studies are required to clarify a role of nNOS in hyperthermic seizure.

• Clinical and Experimental Pediatrics
• /
• v.53 no.3
• /
• pp.358-364
• /
• 2010

Purpose : The aim of this study was to determine the efficacy of $Synagis^{(R)}$ (palivizumab) in reducing the respiratory syncytial virus (RSV) readmission rate in very low birth weight infants (VLBWI ) and the subgroup that showed the most effective vaccination. Methods : We enrolled 350 VLBWI who had been discharged alive from the neonatal intensive care unit of Samsung Medical Center from January 2005 to December 2007 and were followed up for at least one year. A retrospective study based on medical records was performed for a period of one year after discharge. RSV readmission rate was investigated according to BPD (bronchopulmonary dysplasia, requiring oxygen at postnatal day 28) and $Synagis^{(R)}$ prophylaxis. We categorized the subgroups by the severity of BPD gestational age, and birth weight and compared the RSV readmission rates between subgroups. Results : Eleven VLBWI were readmitted. $Synagis^{(R)}$ prophylaxis resulted in a 86% reduction in the rate of readmission due to RSV infection (prophylaxis group, 0.7% and no prophylaxis group, 5.0%; P =0.02). Readmission rate in BPD patients was also reduced in the prophylaxis group (0.7% in the prophylaxis group vs. 5.2% in the no prophylaxis group, P =0.03). The readmission rate in patients without BPD was reduced in the prophylaxis group (0% in the prophylaxis group vs. 4.9% in the no prophylaxis group, P =1.00), but this was not statistically significant.Conclusion : $Synagis^{(R)}$ prophylaxis was effective at reducing RSV readmission in VLBWI. Its efficacy was verified irrespective of BPD, gestational age, or birth weight.

• Journal of Conservation Science
• /
• v.30 no.3
• /
• pp.263-275
• /
• 2014

It's shown how to proceed the study on Manufacturing techniques & Conservation to the Iron Pot from Cheonmachong Ancient Tomb(the 155th Tomb in Hwangnam-dong). In order to investigate manufacturing techniques of the Iron Pot, some parts of the relic were gathered. After mounting, polishing and etching on the relic, analyzing the metal microstructure was conducted. Also it's conducted a SEM-EDS analysis on the nonmetallic inclusion. White iron structure was observed in the metallurgical structure inspection, SEM-EDS analysis. It seems to be dried slowly at room temperature after casting, doesn't look as particular heat treatment to improve brittleness. It is estimated that it's as the handle seam side were verified about 3cm inch wide, 1.5 thick in center of body, so 2 separate half-completed products was cast with width-type mould. The manufacturing techniques Using white cast iron structure, width-type mould are observable to the Iron Pot excavated from Sikrichong Ancient Tomb & Hwangnamdaechong grand Ancient Tomb around those were constructed the same time. It's able to recognize that it's almost identical manufacturing techniques at that time. Conservation is generically following those are survey of pretreatment, foreign material removal, stabilization, restoration and color matching in the order. cleaning & drying were added to the process as occasion demands. The strengthening treatment were difficult with artifact's volume, low concentration Paraloid NAD-10 solution was spread two or three times with a brush, surface hardening also came up with 15wt% Paraloid NAD-10 solution after the conservation was complete. There were connection & restoration for the restoration to the damage after modeling forms that it's similar to damaged parts by using the Fiber Reinforced Plastic resins(POLYCOAT FH-245, mold laminated type). Throughout this research, capitalizing on accumulations of measurements about the production technique of Iron Pot in the time of the fifth and 6th centuries is no less important than the Iron artifact's conservation for a better study in the future.

• The Korean Journal of Pesticide Science
• /
• v.3 no.2
• /
• pp.60-68
• /
• 1999

Effects of temperature and dose-size on infectivity and reproduction of Korean entomopathogenic nematode, Steinernema longicaudum Gongju strain were examined. The greater wax mea Galleria mellonella larvae were exposed to 5, 10, 20, 40, 80, and 160 infective juveniles/larva in $60{\times}15$ mm petri dishes and kept in $13^{\circ}C$, $18^{\circ}C$, $24^{\circ}C$, and $30^{\circ}C$ incubators. Each petri dish contained one larva weighed from 180 to 200 mg. Infectivity was observed everyday for 14 days and reproduction for 30 days. The infectivity of S. longicaudum was more influenced by temperature than by dose-size. Mortalities by S. longicaudum were lower at $13^{\circ}C$ at all concentrations but higher at $24^{\circ}C$ and $30^{\circ}C$ even at lower concentrations, 5 or 10 infective juveniles/larva. Lethal time was also shorter with increasing temperature and dosages. All host larvae died at $24^{\circ}C$ and $30^{\circ}C$ in 2 days at the rate of 160 infective juveniles per host while 83.3% of tested larvae died at $24^{\circ}C$ in 10 days and 90% at $30^{\circ}C$ in 6 days at the rate of 5 infective juveniles. Reproduction was also better with increasing temperature and dosages. The highest number of progenies was obtained at $30^{\circ}C$ in 6 days at the rate of 80 infective juveniles. However, progenies were not produced from cadavers at $13^{\circ}C$. Reproductive period was the shortest at $30^{\circ}C$ of all temperatures by 6 to 9 days. The results indicated that optimum temperatures for infectivity was $24^{\circ}C$ and $30^{\circ}C$ for reproduction.

• Journal of Korean Society of Environmental Engineers
• /
• v.32 no.2
• /
• pp.165-174
• /
• 2010

The numerical modeling of a coal gasification reaction occurring in an entrained flow coal gasifier is presented in this study. The purposes of this study are to develop a reliable evaluation method of coal gasifier not only for the basic design but also further system operation optimization using a CFD(Computational Fluid Dynamics) method. The coal gasification reaction consists of a series of reaction processes such as water evaporation, coal devolatilization, heterogeneous char reactions, and coal-off gaseous reaction in two-phase, turbulent and radiation participating media. Both numerical and experimental studies are made for the 1.0 ton/day entrained flow coal gasifier installed in the Korea Institute of Energy Research (KIER). The comprehensive computer program in this study is made basically using commercial CFD program by implementing several subroutines necessary for gasification process, which include Eddy-Breakup model together with the harmonic mean approach for turbulent reaction. Further Lagrangian approach in particle trajectory is adopted with the consideration of turbulent effect caused by the non-linearity of drag force, etc. The program developed is successfully evaluated against experimental data such as profiles of temperature and gaseous species concentration together with the cold gas efficiency. Further intensive investigation has been made in terms of the size distribution of pulverized coal particle, the slurry concentration, and the design parameters of gasifier. These parameters considered in this study are compared and evaluated each other through the calculated syngas production rate and cold gas efficiency, appearing to directly affect gasification performance. Considering the complexity of entrained coal gasification, even if the results of this study looks physically reasonable and consistent in parametric study, more efforts of elaborating modeling together with the systematic evaluation against experimental data are necessary for the development of an reliable design tool using CFD method.