• Restorative Dentistry and Endodontics
• /
• v.20 no.1
• /
• pp.250-260
• /
• 1995

Bases have been used in order to prevent the leakage of bleachingagents through dentinal tubules in bleached teeth. But the proximal surfaces where the actual resorption takes place havenot been protected. The purpose of this study was to compare the conventional basing method with the basing of the labial and two proximal surfaces to the cementoenamel junction. The bases were placed after conventional root canal treatment. Group I: 2mm thickness bases were placed to the level of labial cementoenamel junction line. Group II : 2mm thickness bases were placed to the level of all c-e J lines including cervical area. Control : No bases were placed. After placement of sodium perborate and 30% hydrogen peroxide mixtureinto the teeth, the changes of pH were measured. The results were as follows. 1. Group II showed smaller leakage of bleaching agents and was statistically significant difference compared to Group I.(p<0.05) 2. Group I showed no statistically significant difference compared to the control group. (p>0.05) 3. There were no significant among the upper and lower teeth groups in each group and between the groups.(p>0.05). According to the above results, it was considered that basing of the labial and proximal surfaces to the cementoenamel junction can reduce the leakage of bleaching agents during bleaching procedure of pulplessteeth.

• Annals of Clinical Neurophysiology
• /
• v.8 no.2
• /
• pp.186-189
• /
• 2006

A 69 year-old woman was admitted with sudden left facial weakness. She had no other neurologic deficit, except for left peripheral type facial palsy. She had a presumptive diagnosis of Bell's palsy. The blink test was indicative of left facial neuropathy due to left medullary lesion. Diffusion weighted (DWI) brain MRI demonstrated high signal signal lesion in left dorsolateral ponto-medullary junction. Apperant diffusion coefficient (ADC) brain MRI showed low signal lesion in the same area. We present an unusual case of ipsilateral peripheral facial palsy in dosolateral ponto-medullary infarction without other neurologic deficits.

• Proceedings of the KACD Conference
• /
• 2003.11a
• /
• pp.546.1-546
• /
• 2003

Laser doppler flowmeter (LDF) has been applied to the measurement of pulpal blood flow (PBF) in human teeth. As far as we searched, the detection area of the pulp in the blood flow measurement has not been clarified, yet. Therefore, the purpose of this study was to obtain information of the detection area in PBF measurement using LDF. The experiments were performed on the artificial blood circulation in extracted human upper central incisors. The apical portions of examined teeth (n=6) were severed and root canals were enlarged from the apical end to the 2mm incisal to the level of enamel-cement junction. An individual resin cap of each tooth was prepared and a hole was drilled 2mm incisal to enamel-cement junction of the labial side of the cap. The measurement probe of LDF (MBF3D, Moor Instrument, UK) was plugged into the hole of the cap. Heparinized human peripheral blood, which was in advance collected and diluted 3 times with physiological saline, was pumped through the apical foramen of the teeth via a silicone tube and a disposable needle (o.d. 0.7mm) and blood flow signals were monitored. The flux signal significantly increased with the enlargement of the root canal to incisal direction (p<0.01, Friedman analysis). The result indicates that the performance of LDF in PBF with human teeth is limited.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.3
• /
• pp.82-88
• /
• 2015

This paper presents a design of the enable switch circuit, which is consist of discrete device at smart junction box(SJB) board. The Enable switch circuit, which receives ignition signal (IG) for input, sends a drive signal to linear regulator and other elements. The circuit design is carried out in a BCDMOS $0.18{\mu}m$ technology, and the performances are verified through simulations according to AEC-Q100 and ISO 7637-2. Die area of the designed Enable switch circuit is $1.67mm{\times}0.54mm$ in layout, and it is shown that the die can be housed in $3mm{\times}3mm$ HVSON8 package. The designed enable switch circuit is expected to be widely adopted in various automotive SJB's since it can significantly reduce the overall printed circuit board form factor.

• Fire Science and Engineering
• /
• v.28 no.6
• /
• pp.41-46
• /
• 2014

Junction at the staircase is one of key factors for building egress analysis. The most important factor is the congestion at the door or somewhere connecting from bigger area to smaller one. The other factor is the congestion in the staircase. It happens when people from upper floors meets people from the connecting floor. Especially egress situation at the high-rise building is worse. The simulation of the junction is only described by physical agent algorithms in egress model. For that reason, the description of phenomena will validate with the result of experiment and estimate the gap between modeling and experiment. In this research, the experiment of the junction and the simulation was conducted and validated. The gap between the experiment and the modeling was estimated. The flow rates of modeling were lower than the modeling.

• Journal of the Korean Academy of Esthetic Dentistry
• /
• v.4 no.1
• /
• pp.12-22
• /
• 1995

The purposes of this study were to compare the bleaching efficacy of sodium perborate when mixed either with Superoxol or distilled water and to evaluate the efficacy of different location of intracoronal base on the presence of apical leakage of tested bleaching agents. Forty eight extracted human permanent incisors were stained via whole blood and canal fillings with conventional gutta percha were performed after routine biomechanical perparations. The experimental intracoronal base was placed either at the cementoenamel junction(group 3, 4) or 2mm below cementoenamel junction(group 1, 2). Walking bleaching was performed by two different combinations of bleaching agents : sodium perborate with distilled water in group 1, 3 and sodium perbrate with Superoxol in group 2, 4. The roots of the teeth were evaluated for the presence of color change to assess the leakage of bleaching agents and the cervical one-thirds of the crown were evaluated for bleaching effect from the whiteness Indea calculated by spectrophotometer. The results were as follows : 1. At the end of 12 days, all the sample teeth demonstrated the increase of Whiteness Index at cervical 1/3 of crown although there were some minor differences among groups. 2. Regardless of location of the base, sodium perborate with superoxol(group 2, 4) showed better results in bleaching than the sodium perborate with distilled water(group 1, 3). 3. Bleaching agent leaked into the root area when the base was placed 2mm below cementoenamel junction but no leakage was found when the base was placed at the cementoenamel junction.

• Restorative Dentistry and Endodontics
• /
• v.18 no.1
• /
• pp.145-155
• /
• 1993

The purposes of this study were to compare the bleaching efficacy of sodium perborate when mixed either with Superoxol or distilled water and to evaluate the efficacy of different location of intracoronal base on the presence of apical leakage of tested bleaching agents. Forty eight extracted human permanent incisors were stained via whole blood and canal fillings with conventional gutta percha were performed after routine biomechanical perparations. The experimental intracoronal base was placed either at the cementoenamel junction(group 3, 4) or 2mm below cementoenamel junction(group 1, 2). Walking bleaching was performed by two different combinations of bleaching agents : sodium perborate with distilled water in group 1, 3 and sodium perbrate with Superoxol in group 2, 4. The roots of the teeth were evaluated for the presence of color change to assess the leakage of bleaching agnets and the cervical one-thirds of the crown were evaluated for bleaching effect from the whiteness Indea calculated by spectrophotometer. The results were as follows : 1. At the end of 12 days, all the sample teeth demonstrated the increase of Whiteness Index at cervical 1/3 of crown although there were some minor differences among groups. 2. Regardless of location of the base, sodium perborate with superoxol)group 2, 4) showed better results in bleaching than the sodium perborate with distilled water(group 1, 3). 3. Bleaching agent leaked into the root area when the base was placed 2mm below cementoenamel junction but no leakage was found when the base was placed at the cementoenamel junction.

• Proceedings of the IEEK Conference
• /
• 2000.06b
• /
• pp.270-273
• /
• 2000

We have fabricated and analyzed photodiodes for optical link with Si pin structures. As the results of experiment, the web patterned photodiode(type C) with $p^{+}$-guard ring showed low junction capacitance of 6~7 pF at $V_{R}$=-5V and high separation ability for optical signal(dark current : $\leq$ 5 nA, optical signal current : $\geq$ 340 nA) due to the small effective $p^{+}$-n junction area and the expanded electric field region. The fabricated Si pin photodiode can be applicable for detecting an optical signal with the wavelength of about 660~670 nm. It can also be integrated with the twin well CMOS structure to develope an one chip based optical receiver IC. IC.C.

• Proceedings of the KIEE Conference
• /
• 2005.07d
• /
• pp.2921-2923
• /
• 2005

This paper presents to generate 3D building model using estimation of rooftop surface after 3D line segment extraction using hybrid stereo matching techniques in terms of the co-operation of area-based stereo and feature-based stereo. we first performed a junction extraction from 3D line segment data which was obtained by stereo images, and finally generated building's reliable rooftop surface model using LSE(Least Square Error) method after creating surfaces by grouped and fixed junction points. we generated synthetic images for experimentation by photo-realistic simulation on Avenches data set of Ascona aerial images.

• 한국초전도학회:학술대회논문집
• /
• v.9
• /
• pp.238-241
• /
• 1999

Analog-to-digital converter has attracted a lot of interests as one of the most prospective area of an application of Josephson Junction technology. Recently, the development of a digital-to-analog converter has been pursued to achieved the high performance. One of the main advantage in using single flux quantum logic in a digital-to-analog converter is the low voltage drop in a single Josephson Junction and hence the resolution of the output voltage of this digital-to-analog converter can be very high. In this work, we have used a software, called WRspice, to study a voltage multiplier circuit which is the basic block in building a digital-to-analog circuit. In simulation, we operated a voltage multiplier with .4 Josephson Junctions per stage and studied the dependence on the circuit bias currents and the circuit inductors of the voltage multiplier. Our simulation results showed a fast operation and reasonable circuit margins.