• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.6
• /
• pp.3442-3447
• /
• 2014

A simple method to evaluate the hygroscopic characteristics of polymer of microelectronic plastic package is suggested. To evaluate the characteristics, specimens were prepared, and the internally absorbed moisture masses were measured as a function of the absorbing time and calculated numerically. The hygroscopic pressure ratio was calculated by heat transfer analysis supported by commercial FEM code because the hygroscopic diffusion equation has the same form as the heat transfer equation. The moisture masses were then summed by the self developed code. The nonconductive polymers had quite different characteristics for the different lots, even though they were the same products. The absorbed moisture mass variations were calculated for several different characteristics, and the optimal curve of the mass variation close to experimental data was selected, whose solubility and diffusivity were affected by the hygroscopic characteristics of the material. The method can be useful in the industrial fields to quickly characterize the polymer material of the semiconductor package because the fast correspondence is normally required in industry. The weight changes in the aluminum-nonconductive-polymer joint due to moisture absorption were measured. The deformed system was also measured using the Moire Interferometry system and compared with the results of finite element analysis.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.9 no.2
• /
• pp.187-200
• /
• 2014

Industry Cooperation is not the choice of national development but the inevitable component in the world. Industry cooperation results of the reconstruction of the country is an important place as an essential element of the economic development of the national policy in the major economies. Despite several changes in the international economic environment, United States, Canada, Finland, Sweden, Israel settled and maintaining the sustainable development of the countries which successfully established Industry-University Cooperation or Industry-Acaemy Cooperation system in history. In this study, delivered to the realistic ways of Industry cooperation through comparison study on domestic and international cooperation programs. The new activation programs of industry academic cooperation are delivered, that is, The bonus payments system of technology development patent and free technology transfer for joint development, bonus points system and evaluation indicators for joint capacity building program which participate student, industry and academic sector, step-by-step training. system for total employment and entrepreneurship at the same time strengthening management training programs and education opportunity gives to the benefits for the community members. Finally, Intellectual property expert matching program which develops basis of technology trader and expert maps in the smallest unit by administrative area. practice the internet information search services in national wide network for this matching program and government office dedicated to staffing for technology transfer.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.5
• /
• pp.2125-2133
• /
• 2013

Recently, an interest on joint behavior between adjacent concrete slab tracks has increasing due to large application of such track system. Dowel bars are widely used to improve load transfer capacity across the joints. Dowel bars reduce the deflections and stresses by transferring the load between the slabs. This study proposes the lumped shear spring model to efficiently model dowel joints of adjacent slabs. This model includes bearing stiffness between dowel bar and concrete as well as dowel gap. Strength of the proposed spring model is evaluated based on Concrete Capacity Design method under the assumption of shear failure mode in the joints. Experiments are also performed up to failure to evaluate the accuracy of the proposed model. It has been observed that the proposed model is able to predict initial nonlinearity due to dowel gap, and capture material nonlinearity of the test slabs. Thus, it is recommended that the proposed model can be effectively applied to the dowel joints of concrete slab track.

• Journal of Korea Technology Innovation Society
• /
• v.11 no.4
• /
• pp.532-562
• /
• 2008

Recently, one of the issues to be discussed from the viewpoint of product management in National R&D Programs is about the management of intellectual property produced by joint research and development. According to existing legislative system, the main R&D institute and collaborative enterprise own the patent produced by joint R&D activities together at the rate of investment. But, there are many discussions if that is right in legal principles and in substance. Patents by Cooperative National R&D Programs are very different from common patents because of its characteristics and have scheme controlled complexly by related laws and ordinances. This paper aims to review the legal theory on the possession and utilization of patents produced by Cooperative National R&D Programs, and to try to find out the improvement of existing legislative system. For this purpose, after looking into the meaning and the legal system of Cooperative National R&D Programs, and examining the ruling theory on the possession and utilization of co-invented patent, finally research the problems and improvement of existing related legislative system.

• Korean Journal of Applied Biomechanics
• /
• v.14 no.1
• /
• pp.51-63
• /
• 2004

The purpose of this study was to investigate a three dimensional kinematic variables about the last stride and the release phase of the throwing technique for female javelin throwers. For the motion analysis, Six female javelin throwers were used as subjects. Three-dimensional coordinates were collected using the Kwon3D Motion Analysis Package Version 2.1 Program. Two S-VHS Video Cameras were used to record the locations and orientations of control object and the performances of the subjects at a frequency of 6.0 HZ. After the kinematic variables such as the time, the distance, the velocity, and the angle were analyzed about the last stride and release phase, the followings were achieved; 1. For the effectively javelin throwing, the subjects appeared to do long the approach time in the phasel of landing phase, and short the delivery time in release phase 2. In the release event, the other subjects except for subject A appeared to throwing in the lower condition than the height of themselves. This result showed to slow the projecion velocity. 3. For increase the projection vcelocity of the upper extremity joint in the release event, it appeared to do extend rather the shoulder angle than increase the extension of elbow joint. 4. The body of COG angle showed to gradually increase nearly at the vertical axis in the release event. But the front lean angle of trunk showed a small angle compare to increase of the body of COG angle. Therefore for the effectively momentum transmission of the whole body in the javelin, the front and back lean angle of trunk appeared to do fastly transfer the angle displacement in the arch posture or the crescent condition during the deliverly motion of the release phase.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.12
• /
• pp.30-45
• /
• 2014

Recently, multimedia application users who demand for ubiquitous computing environment are rapidly increasing, and wireless mesh network is receiving attention as a cost-effective key technology for next generation wireless networking. When multiple flows are transmitting data at the same time in the network, routing for path selection of each flow and link resource allocation for data transmission of each flow are one of the key factors that influence to the effectiveness of the network directly. In this paper, we consider problems for path discovery and resource allocation of links at the same time and we propose an algorithm based on mathematical modeling using a technique for cross-layer optimization design in STDMA-based wireless mesh networks that can enhance transfer performance for each flow. We show by performance analysis that the proposed algorithm can enhance the throughput performance by maximally utilizing given bandwidth resources when the number of flows increase in multi-hop wireless mesh networks.

• Journal of Digital Convergence
• /
• v.17 no.12
• /
• pp.555-563
• /
• 2019

This study was to provide quantitative basic data on the forehand and backhand throw movements of flying disks. For this purpose, the kinematic variables were calculated using the three-dimensional motion analysis system. A comprehensive analysis of the study variables showed that it is important to throw flying disks accurately as well as far away, so in P2 and P3 it is necessary to control forward movement and concentrate on the rotation of the joints. In addition, rotational force transfer from pelvis to body is considered important for efficient rotational movement. The forehand was found to mainly utilize the movement of the upper extremity joint to perform throwing motion, while the backhand throw was found to be relatively utilized for the rotation of the torso and pelvis. Based on the quantitative data of this study, we hope that it can be used as a basic material for on-site training of Flying Discs.

• Journal of the Korean Orthopaedic Association
• /
• v.54 no.5
• /
• pp.377-383
• /
• 2019

The biomechanics study of the hip is aims to understand and explore the dynamic principles of weight transfer through the hip joint. This basic science knowledge can be applied in a variety of areas, including degenerative joint diseases and hip replacement arthroplasty. In particular, understanding of the biomechanics of the hip has led to the development of materials, design and fixation of implants, and it can be applied in various areas, such as the selection of surgical methods and the location of the implant. Moreover, it is essential to have good knowledge of the biomechanics of the hip to achieve better clinical results for patients. Therefore, this paper introduces the basic knowledge and biomechanical characteristics of a normal hip and hip replacement arthroplasty, which are needed to approach the biomechanics of the hip.

• Journal of Distribution Science
• /
• v.9 no.2
• /
• pp.13-24
• /
• 2011

With the increasing market share of retailer brands, many authors have paid considerable attention to retailer brands. Before market liberalisation in 1996 in Korea, retailer brand market was led by the supermarket retailing format, although the first retailer brand product was developed by the department store format. In parallel with the entry of foreign multiple retailers, the retailer brand market has experienced rapid growth. Particularly, the expansion of Tesco UK with well-established retailing know-how into Korea has encouraged Tesco Korea to actively get involved in retailer brand program. As a result, Tesco Korea has led retailer brand market in the Korean marketplace. The research starts with the question of why Tesco Korea has achieved such a higher retailer brand share. Accordingly, this study is to explore how Tesco UK has transferred its own retailing knowledge into Tesco Korea, in terms of retailer brand program development. In order to explore why the retailer brand share of Tesco Korea is higher than that of its counterparts, the author adopted in-depth interview with prepared-questions and store observation as a research methodology. To examine working process as well as information flows within Tesco Korea and from UK to Korea, in-depth interview method is one of the most suitable research methodologies, because of the difficulty of quantifying information or data related to work flows. In addition, to increase the validity of information, the researcher had interviews with Tesco Korea supplier and store personnel. Based on these research techniques, this research explored how Tesco UK has influenced or advised Tesco Korea, particularly, from the point of view of knowledge transfer. Since the entry of Tesco UK into Korea as a joint-venture, the retailer brand market share of Tesco Korea has continuously increased. It would be expected that Tesco UK has helped Tesco Korea to settle down in the Korean market. During interviews with Tesco and a Tesco supplier, the researcher found that Tesco Korea has obviously taken an advantage of retailing know-how created by Tesco UK. Furthermore, the retailer brand development and handling process of Tesco Korea has been operated with the help of Tesco UK. This might mean that Tesco UK has directly or indirectly an impact on the improvement of Korean retailer brand development skills. As a mechanism to transfer retailing knowledge developed in the home market into the host market, one of the international retailers, Tesco UK has adopted many different ways such as annual meeting, trading meeting to import or export own retailer brand products, offering of operation manual developed by Tesco UK and buyer cooperation between Tesco UK and Korea, in order to share information. Through these communication techniques, the knowledge of Tesco UK has been transferred to Tesco Korea. This research accordingly suggests that retailer brand market share is apparently related to how sophisticated or advanced the knowledge of the retailer brand development and handling process of retailers are. It is also demonstrated by this research that advanced development and handling skills make a considerable contribution to increasing retailer brand share in markets with a lower share or no presence of retailer brands.

• Journal of Korea Technology Innovation Society
• /
• v.15 no.2
• /
• pp.242-261
• /
• 2012

Early stages of technology valuation have been often overlooked or under-represented. The early stage technologies are even riskier due to their inadequacy of commercial development and market applicability. More than 95% of patents fail to earn any revenues so that the majority of patents were valueless. Technology transfers from laboratories at universities and research institutes to industrial firms have increased to acquire value from invented technologies. Technology transfer, a process of transferring discoveries and innovations resulted from research to commercial sectors, typically comprises several steps: disclosing the discoveries and innovations, i.e., intellectual property (IP), evaluating the IP's economic prospects, securing a patent, copyright or trademark for the IP, commercializing the technology through licensing, forming a joint venture, or selling. At each of those stages in the research and development of technology, the value of technology would play a very important role of making decision on the movement toward the next step, however, the financial value of technology is not easy to determine due to a great amount of uncertainty in the course of research and development, and commercialization. This paper refers to technology embodied as devices, equipment, software or processes primarily developed at public research institutions such as universities. Sometimes it is also as the result of externally financed projects contracted with industry. Nearly always technology developed at public research entities results in laboratory prototypes. When it is required to define the technology transfer contract terms for the license of the university patrimonial rights to external funding companies or other interested parties, a question arises: what is the monetary value? In this paper, we present a method for technology valuation based on the identification of specific value points related to its development. The final technology value must be within previously defined value limits. This paper consists of the review of issues related to technology transfer and commercialization, the identification of characteristics of technologies in the early stage of technology development, the formulation of framework of methods to value the early stage technologies, and the conclusion and implication of the previous review.