• Journal of Computing Science and Engineering
• /
• v.6 no.4
• /
• pp.243-256
• /
• 2012

In this paper we present a framework for a novel kind of context-aware preference query composition whereby queries for the Preference SQL system are created. We choose a commercial e-business platform for outdoor activities as a use case and develop a context model for this domain within our framework. The suggested model considers explicit user input, domain-specific knowledge, contextual knowledge and location-based sensor data in a comprehensive approach. Aside from the theoretical background of preferences, the optimization of preference queries and our novel generator based model we give special attention to the aspects of the implementation and the practical experiences. We provide a sketch of the implementation and summarize our user studies which have been done in a joint project with an industrial partner.

• Geomechanics and Engineering
• /
• v.3 no.1
• /
• pp.29-43
• /
• 2011

In this paper a semi-analytical approach is proposed to study the lateral behavior of a piled footing under horizontal loading. As accurate computation of stresses is usually needed at the interface separating the footing (pile) and the soil, this important location should be appropriately modeled as zero-thickness joint element. The piled footing is embedded in elastic soil with either homogeneous modulus or modulus proportional to depth (Gibson's soil). As the pile is the principal element in the piled footing system, a limited parametric study is carried out in order to investigate the influence of footing dimensions and the interface conditions on the lateral behavior of the pile. Hence, the pile behavior is examined through its main governing parameters, namely, the lateral displacement profiles, the bending moments, the shear forces and the soil reactions. The numerical results are presented for Poisson's ratio of 0.2 to represent a large variety of sands and Poisson's ratio of 0.5 to represent undrained clays.

• Journal of Korean Physical Therapy Science
• /
• v.8 no.1
• /
• pp.727-734
• /
• 2001

Contracture is defined as the lack of full passive range of motion resulting from pint, muscle or soft tissue limitationprolonged Pint immobilization will result in stress and stretch deprivation and gradual development of contracture. the tissue changes caused by immobilization may be categorized as cellular modeling, ground substance and collagen response, and tissue response. contracture can be divided into three categories according to the anatomical location of pathological changes :arthrogenic, myogenic, soft tissue contractures Therapeutic approach of contracture is thermal or cold agents application, stretch or restoration of length, traction, manipulation, mobilization positioning and restoration of function. The purpose of this article is to review current concepts of mechanical properties and synthesis of collagen tissue and the underlying pathomechanics as it relates to evaluation and treatment of contracture.

• Journal of the Korean Data and Information Science Society
• /
• v.21 no.5
• /
• pp.935-944
• /
• 2010

In this paper, we develop the noninformative priors for the reliability in a stress-strength model where a strength X and a stress Y have independent exponential distributions with different scale parameters and a common location parameter. We derive the reference priors and prove the propriety of joint posterior distribution under the general prior including the reference priors. Through the simulation study, we show that the proposed reference priors match the target coverage probabilities in a frequentist sense.

• Special Issue of the Society of Naval Architects of Korea
• /
• 2006.09a
• /
• pp.15-22
• /
• 2006

Global strength check for TLP tendon body can be estimated based on maximum tendon tensions and bending moments, which are resulted in TLP global performance analysis. Final tendon length, especially thread length on Length Adjustment Joint, is easily calculated with water depth at TLP in-place location, TLP lock-off draft and unlocking length of tendon bottom section. And LAJ thread length, which is locked with TLP top tendon connector, should be carefully determined with tendon design and installation tolerances.

• Journal of the Korean Geotechnical Society
• /
• v.17 no.5
• /
• pp.17-27
• /
• 2001

지하 굴착공동의 천장면에 형성되는 잠재적 키블록의 존재성과 운동학적 거동 양상 및 안정성을 해석적으로 분석할 수 있는 시스템을 개발하였다. 천장에서 측정된 절리들의 상대적인 위치와 방향성 자료를 이용하여 데이타베이스를 구축하였으며, 굴착설계도와 연계된 전산절리도를 작성하였다. 잠재적 키블록의 존재성과 거동양상은 사면체로 가정된 블록 옆면의 3차원 공간에서의 평면식을 절리의 방향성에 의거하여 구성하며 대수학적으로 분석되었다. 블록의 안정성 분석은 자중에 의해 미끄러짐이 발생되는 블록면의 공간 기하학적 특성을 고려하여 수행하였다. 개발된 분석시스템의 현장활용성을 검증하기 위하여 언양 자수정동굴에서 키블록 형성 및 거동양상을 조사하여 분석결과와 비교하였다.

• Tunnel and Underground Space
• /
• v.14 no.3
• /
• pp.203-214
• /
• 2004

For total system performance of a potential radwaste repository, a hypothetical site is assumed with feasible boundary conditions. Assuming a coastal repository, the sensitivity of the depth and the location of a repository along with the distance to a joint on groundwater transport pathways is studied. Results from Connectflow analysis could be used as input of the MASCOT-t the probabilistic safety assessment code.

• Proceedings of the KWS Conference
• /
• 2003.05a
• /
• pp.176-178
• /
• 2003

The weld zone of dissimilar formed Al alloy exhibited the complex structure of the two materials and mainly composed of the retreating side material. The mechanical properties were also depended on the dominant microstructure of the weld zone with welding conditions. The different mechanical properties of weld zone with welding conditions were related to the behavior of the precipitates of wrought Al alloy and Si particles of cast Al alloy. The higher mechanical properties of weld were acquired when relatively harder material, wrought Al alloy, was fixed at the retreating side.

• Proceedings of the KWS Conference
• /
• 2005.11a
• /
• pp.189-191
• /
• 2005

Dissimilar joining of AI 6013-T4 alloys and austenite stainless steel was carried out using friction stir welding technique. Microstructures near the weld zone and mechanical properties of the joint have been investigated. Microstructures in the stainless steel side and AI alloy were depended on the thermo-mechanical condition which they received. TEM micrographs revealed that the interface region was composed of the mixed layers of elongated stainless steel and ultra-fine grained AI alloy and intermetallic compound layer which was identified as the $Al_{4}Fe$ with hexagonal close packed structure. Mechanical properties were lower than those of 6013 AI alloy base metal, because tool inserting location was deviated to AI alloy from the butt line, which resulted in the lack of the stirring.

• Journal of Information Display
• /
• v.5 no.1
• /
• pp.41-46
• /
• 2004

In this paper, a new stereo 3D moving-target tracking system using the MSE (mean square error) and BPEJTC (binary phase extraction joint transform correlator) algorithms is proposed. A moving target is extracted from the sequential input stereo image by applying a region-based MSE algorithm following which, the location coordinates of a moving target in each frame are obtained through correlation between the extracted target image and the input stereo image by using the BPEJTC algorithm. Through several experiments performed with 20 frames of the stereo image pair with $640{\times}480$ pixels, we confirmed that the proposed system is capable of tracking a moving target at a relatively low error ratio of 1.29 % on average at real time.