• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.10
• /
• pp.2596-2601
• /
• 2009

Gouging is defined as the removal of weld metal and base metal from the opposite of a partially welded joint to facilitate complete joint penetration. Since the work by current method needs skillful welding and grinding, there is a limit on the increase of operation efficiency. Noise and dust from the weld gouging also deteriorate the work place and cause environmental problems. In this study, the gouging work by cutting method is proposed to overcome the defects from weld gouging such as low productivity, severe noise, dense dust, and so on. The developed cutting gouging system removes material as much as $13,565mm^3/min$, and enlarge the labor productivity as three times compared to that by weld gouging method.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.2
• /
• pp.420-425
• /
• 2010

In the process of warm forging, billet is heated up to $800^{\circ}C$ and located in the upper part of die block impression. The scattered oxidized scale may cause workers burn and shortening of die life sticking to the die block impression. The separating materials sprayed in die block cause harmful dust, harmful mist, fume, and bad odor which contaminate workshop environment. The process is classified as one of the avoided jobs and make the planned output achievement difficult. Development of an elimination device to clear out the contaminating materials in the workshop and improvement of the unsatisfactory maintenance method to fix the abrasion of die block impression which delays the dead line, cost increases needs to be developed. In this research, I tried to solve the problems caused in warm forging of bronze pipe joint such as the billet heating process, die maintenance, and manufacturing cost through improvement of warming forging manufacturing method and die maintenance method and eliminating harmful gas which will make the workshop more environment friendly.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.9
• /
• pp.5419-5424
• /
• 2014

A weld scallop is a small quadrant or half circle type hole installed in the weld line cross area for easy welding operation. Many types of T-bars with a scallop can be welded in a block assembly stage in shipbuilding. The difficulties arise from the fact that scallops are to be filled by build-up welding after welding of the cross line is complete. In this study, a non-scallop block joint welding method was developed using special type CBM (ceramic backing material). The wedge shaped CBM was devised to insert a CBM into just the V groove of weld line cross area without weld scallop. A saw-toothed shape was adopted for easy cutting of the unnecessary part in the CBM fitting process. The applicability of the developed method was verified through welding experiments based on the yard welding conditions.

• Journal of Korea Technology Innovation Society
• /
• v.11 no.4
• /
• pp.532-562
• /
• 2008

Recently, one of the issues to be discussed from the viewpoint of product management in National R&D Programs is about the management of intellectual property produced by joint research and development. According to existing legislative system, the main R&D institute and collaborative enterprise own the patent produced by joint R&D activities together at the rate of investment. But, there are many discussions if that is right in legal principles and in substance. Patents by Cooperative National R&D Programs are very different from common patents because of its characteristics and have scheme controlled complexly by related laws and ordinances. This paper aims to review the legal theory on the possession and utilization of patents produced by Cooperative National R&D Programs, and to try to find out the improvement of existing legislative system. For this purpose, after looking into the meaning and the legal system of Cooperative National R&D Programs, and examining the ruling theory on the possession and utilization of co-invented patent, finally research the problems and improvement of existing related legislative system.

• Proceedings of the KSRS Conference
• /
• 2004.10a
• /
• pp.371-374
• /
• 2004

The task of development and usage in a corporate computer network of the Far Eastern Branch of the Russian Academy of Sciences (FEB RAS) of integrated technology of joint use by the scientists of satellite and sub satellite data on a Northwestern Pacific is considered. This integrated technology is realized by embedding of satellite data in the corporate oceanographic GIS of FEB RAS as a new information layer, and also by support of GIS by program techniques for specialized processing of both kinds of the data. As a result of integration the specialists of FEB RAS have an opportunity to carry out coordinated samples of satellite and various oceanographic data as a function of area, time and other important conditions, visualize them together and carry out analytical processing with the usage of the GIS tools. Application of the realized approach to improve the techniques of detection and description of the oceanic phenomena on ERS-l and ERS-2 SAR images as well as to improve of perspective techniques of the usage the brightness temperatures measured by a microwave radiometers AMSR-E on a board of Aqua (USA) satellites are discussed.

• Journal of Veterinary Clinics
• /
• v.34 no.6
• /
• pp.441-444
• /
• 2017

A 15-year-old spayed female Miniature Schnauzer was presented for unilateral foreleg lameness and pain. On physical examination, left elbow joint swelling and stiffness were identified. On a computed tomography (CT) scan, a periosteal reaction of the left humerus from the distal metaphysis to the epiphysis and cortical destruction of the medial condyle was observed. Based on blood tests, histopathology, and immunohistochemistry, it was concluded as a skeletal histiocytic sarcoma. Since the patient's pain was not controlled despite application of a fentanyl patch, a left forelimb amputation was decided upon as part of the palliative therapy. Metronomic chemotherapy with toceranib phosphate and pamidronate was initiated. Toceranib was administered for 3 months without the development of any adverse effects except mild neutropenia. However, 3 months after initiating treatment, the toceranib was discontinued due to moderate gastrointestinal disturbances. Over the next 2 months, a left mandibular bone mass and cortical bone destruction in the bilateral tibia and tarsal joint were identified on CT. The patient became unwilling to eat and was noted to have severe skeletal pain. The anorexia and lethargy were progressively worsening and the owner decided to euthanize the patient. A necropsy was performed and the patient was definitively diagnosed with disseminated histiocytic sarcoma based on histopathologic and immunohistochemical analyses. This report describes a Miniature Schnauzer dog with DHS managed with surgical removal and metronomic chemotherapy with toceranib that survived with an improved quality of life for 7 months.

• Journal of the Korean GEO-environmental Society
• /
• v.16 no.10
• /
• pp.23-32
• /
• 2015

Most studies on slope collapsed have focused on collapse cases that occur on stabilized slopes in public use. Few studies have been conducted on the collapse characteristics of slopes that occur during construction before stabilization of the slope. In this study, detailed investigation was conducted for 79 sites where slope collapse occurred during or immediately after construction in the Chungcheong region, and their geometrical characteristics, collapse characteristics, design and reinforcement methods were evaluated. As a result of this analysis, it was found that the Chungbuk (CB) area was marked by plane-type collapse and surface layer collapse whereas the Chungnam (CN) area was marked by surface layer collapse or loss of sedimentary rocks. Furthermore, the major collapse factors of the Chungbuk region were joint alternations (53%) and weathering (25%), and the blocking due to multidirectional joints and foliation was also an influencing factor. In the phyllite area, too, the development of joints (55%) was a major factor, but the geological characteristics (36%) of sedimentary rocks such as faults and coaly shale also had considerable effects. Therefore, the geological, climatic, and environment characteristics were found to have affected the stability of slopes.

• Magazine of the Korea Concrete Institute
• /
• v.7 no.4
• /
• pp.157-168
• /
• 1995

The structural performance of Slip-Form system was examined to make use of many advantages of fast construction and high quality c0ncret.e. However, the separate cor~struction of wall and slabs may cause some weaknesses around the wall-slab connection region. Thus, the purpose of the study is to examine the structural performance of wall-type structure constructed by Slip-Form method and to develop an efficient connection system between wall and slabs. In order to investigate the system, 7 wall specimens and 8 wall-slab joint specimens were tested and the experimental results were compared with the design equations and theoretical analysis. A satisfactory performance was obtained from the wall specimen tests. However, wall-slab joint specimens with rebar connection materials I Ilalfen] were shown that. the strength of' wall should be checked during design porocess.

• Journal of Acupuncture Research
• /
• v.18 no.1
• /
• pp.100-112
• /
• 2001

Objective : The purpose of this study is to investigate the immunological effect of Ramulus Cinnamomum aqua-acupuncture on the cellular immune response in mice with LPS induced arthritis. Methods : All the BALB/C mice used in this study were bred and maintaned in our pathogen-free mouse colony and were 6wk of age at the start of the experiment. The experimental model of arthritis was induced by injeciton of 300${\mu}g$/kg LPS in mice knee joint. Ramulus Cinnamomum aqua-acupuncture was injected into Yangnungchon(Gb34) of mice 2daily for 14days. Immunohistochemical analysis was carried out to assess CD4+, CD8+, CD11b, IL-$1{\beta}$, IL-2R and CD106 expression in common iliac lymph nodes and synovial menbrane after stimulation with Ramulus Cinnamomum. Electron microscopy was carried out to assess change of synovial membrane. Ramulus Cinnamomum aqua-acupuncture stimulation group was compared to control group and non stimutated with aqua-acupuncture. Resutts : At day 14 post arthritis onset, Immunohistological studies using monoclonal antibodies showed that Ramulus Cinnamomum aqua-acupuncture goup had decreased expression of CD4+, CD8+, CD11b, IL-$1{\beta}$, IL-2R and CD106 at common illiac lymph nodes and synovial membrane compared with control group. Conclusions : Ramulus Cinnamomum aqua-acupuncture stimulation inhibited the development of cellular immunity to LPS-induced arthritis in mice. Thus, aqua-acupuncture stimulation may have preventive effects on autoimmune inflammatory joint diseases. The effects of AA on immune function and disease activity in patients with RA warrant further investigation.

• Journal of the Microelectronics and Packaging Society
• /
• v.14 no.2 s.43
• /
• pp.23-33
• /
• 2007

The growing environmental regulation governs the use of lead by RoHS, WEEE, and then. The electronic industry is moving to replace Pb-bearing solder with Pb-free solder. To use the Pb-free solder, microelectronic industry needs consequently the new reliability appraisal such as the packaging for high temperature process, various mechanical change caused by new solder, and the development of Pb-free sloder for long life of product. The evaluation of solder bar and mechanical properties of joint were performed compared with international standard, and new appraisal standard was established. The solderability and spread ability of Sn-0.7Cu solder material showed up to the standard. Shear test of solder joint using by the solder resulted that the shear strengths after thermal shock or after aging were not much lower than the shear strength of as-soldered and that they were also up to the standard.