• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.63 no.2
• /
• pp.113-118
• /
• 2014

Tidal power is one of new and renewable energy sources. Tidal power is generated by using the gap in the water level between the water outside and inside the embankment. All tidal power plant in Korea were being operated by import of turn-key from abroad. The know-how and technology which are the most important to build predictive control system has become increasingly difficult to obtain from advanced countries because most of them avoid to transfer, which the domestic development of the control system is needed. In this paper, a study on start stop system at water turbine-generator for tidal power plant at the beginning of development was presented. For improvement the efficiency and develope of core technology of the start stop system, the technique and characteristics of tidal power, modeling, maximum generation calculation method, and optimal control of joint control system in Sihwa tidal power plant were studied.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.8 no.6
• /
• pp.98-104
• /
• 1999

As the accuracy of manufactured goods needed high accuracy processing has made the efficiency of NC and measurement technology development, the innovation of machine tools has influence the development of the semi-conductor and optical technology. The movement errors can be expressed in terms of yaw, roll an pitch etc. In the case of expanding the error range, static, dynamic and servo gain errors can be included. Machining center might have twenty-one movement errs including three types of joint errors. Those errors have been measured on the condition of just loading of standard table. Regarding these measuring methods, the mechanical compliance of the structure has not been considered. In this paper, therefor, the influences of the additional load on the positioning accuracy are investigated. The results and the techniques proposed in this study can be considered very effective and useful to compensate more correctly the positioning motion.

• Proceedings of the KWS Conference
• /
• 2003.05a
• /
• pp.216-218
• /
• 2003

A fracture mechanics analysis methodology for stress corrosion cracks (SCCs) existing in the Alloy 600 nozzle weld joint for control rod drive mechanisms (CRDMs) of pressurized water reactor is studied. Effects of weld residual stresses on the sub-critical crack behavior during the reactor operation are investigated by a fracture mechanics analysis, which is combined with the finite element alternating method. It is found that effects f the residual stresses on the stress intensity factor (SIF) and crack growth rate (CGR) are dominant and values of SIF and CGR of cracks in the region of weld joint are increased by a factor of three or more on an average.

• Asian Journal of Innovation and Policy
• /
• v.1 no.1
• /
• pp.116-132
• /
• 2012

This paper deals with university - industry collaboration movement in China in recent years. By summarizing related development background in Government-Industry-University framework, the paper specifies Chinese pattern through analysis of technology transfer between universities and industries, collaborative R&D between universities and industries in practical fields, and university-run high-tech companies, especially through analysis of joint patenting between universities and their industrial partners in China. The research provides clear picture of Chinese universities' increased development with industrial entities in comprehensive and wider technology fields.

• Journal of Ocean Engineering and Technology
• /
• v.13 no.2 s.32
• /
• pp.83-89
• /
• 1999

In this paper an experimental study on the development of the shielded metal are welding(SMAW) optimization technique for the dissimilar materials SS41 and STS304 of Auto-Lifting Magnet core plate was carried out. It was confirmed that the optimum welding heat input range was 37.5 to 45 kj/cm by considering on the strength and fatigue life of the welded joints more than 100% joint efficiency. And the quantitative relationship empirical wquation between the strength toughness adn fatigue life and the weld heat input was obtained.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2006.11a
• /
• pp.321-324
• /
• 2006

An experimental study on the bond strength of wall-slab joint in SC(steel plate-concrete) structure was performed. Six-full scale specimens were tested. Specimens were constructed with key variables, such as, development length, location of the bar and quantity of the shear bar. The experimental results, show that as the development length and quantity of the shear bar increase, the bond strength increases. As the bars is located on the inside the stud bolt, the bond performance was highly increased compared to the bars located out of plane of the stud bolts.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2019.11a
• /
• pp.224-225
• /
• 2019

The purpose of this study was to develop a technology to prevent leakage of construction structures for the Chinese market. The first key development factor is to establish a joint quality standard that corresponds to all performance criteria set out in Chinese Standard JC / T 2428-2017. The second key development factor is to develop a product capable of exhibiting performance in a low temperature environment of $-30^{\circ}C$ and coping with 15mm structure behavior.

• International Journal of Korean Welding Society
• /
• v.2 no.1
• /
• pp.57-61
• /
• 2002

This paper presents development of a SEC(Solar Energy Concentration) utilizing the concentrated solar beam radiation for joining engineering thermoplastics such as Acrylonitrile/Butadiene/Styrene(ABS), Polycarbonate(PC) and Polymethylmethacrylate (PMMA). In addition, to study the joining of the materials, necessary experimentation with applying primer was performed. Tensile tests were conducted to determine the bond strength achieved at the specimen Joint interface. Microscopic examinations of the fractured joints were performed in order to analyze the overall bond quality. Finally, the results in terms of bond strength achieved at the joint interface and energy consumed in the process was compared with those obtained with similar thermoplastic joining technique utilizing microwave energy.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.10a
• /
• pp.102-103
• /
• 2021

With the development of medical IT technology, personalized medical services are increasing in the silver industry era through the development of smart healthcare business. Therefore, in this paper, using various sensors in the Arduino environment, we implemented a finger modeling that can perform joint rehabilitation exercise that can provide personalized smart healthcare services. By measuring the activity of each individual finger joint using an Arduino-based flex sensor, it is intended to be used for personalized rehabilitation exercise in the smart healthcare field in the future.

• Korean Journal of Clinical Laboratory Science
• /
• v.45 no.4
• /
• pp.180-187
• /
• 2013

The author surveyed and analyzed the research papers of korean journal of clinical laboratory science (KJCLS) that have been posted for 28 years from 17 volumes in 1985 to 44 volumes in 2012 in the time of 50th anniversary of foundation of the korean association of medical technologists (KAMT) of in 2012. This study is aimed to provide members with basic materials helpful to research development and suggest development measures of journal. The author analyzed the number of papers, research field, type of papers, and number of authors based on the title of paper. The total number of papers is 916 and average number of paper is 33. The research field was biochemistry 167 (18.2%), microbiology 160 (17.4%), histology & cytology 99 (10.8%), molecular genetics 77 (8.5%), hematology 69 (7.5%), physiologic function 64 (7.0%), immunology 60 (6.5%), blood bank 33 (3.6%), radioimmunoassay 33 (3.6%), parasitology 27 (2.9%), quality control 18 (2.0%), urinalysis & body fluid 13 (1.4%), cytogenetics 12 (1.3%), flow cytometry analysis 6 (0.7%), and other articles were 78 (8.5%). Regarding the type of papers, original article was 777 (84.8%), case report 52 (5.7%), review 23 (2.5%), others 64 (7.0%). Regarding the number of paper authors, single author was 208 (22.7%), 2-man joint authors 178 (19.4%), 3-man joint authors 181 (19.8%), 4-man joint authors 151 (16.5%), over-5-man joint authors 198 (21.6%). The average number of papers was 33 for 28 years from 1985 to 2012, it is fewer than number of technologists and professors working currently regardless of the level of quantity and quality. The KAMT needs paper promoting measures and strategic investment on the scholarly journals that can aggressively promote to members and inspire research desire for korea citation index (KCI) registered article selection of KJCLS in the future.