• Structural Engineering and Mechanics
• /
• v.32 no.2
• /
• pp.321-335
• /
• 2009

When a roof frame is subjected to the airblast loading, the conventional way to analyze the damage of the frame or design the frame is to use single degree of freedom (SDOF) model. Although a roof frame consists of beams and girders, a typical SDOF analysis can be conducted only separately for each component. Thus, the rigid body motion of beams by deflections of supporting girders can not be easily considered. Neglecting the beam-girder interaction in the SDOF analysis may cause serious inaccuracies in the response values in both Pressure-Impulse curve (P-I) and Charge Weight-Standoff Diagrams (CWSD). In this paper, an inelastic two degrees of freedom (TDOF) model is developed, based on force equilibrium equations, to consider beam-girder interaction, and to assess if the modified SDOF analysis can be a reasonable design approach.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2005.05a
• /
• pp.150-155
• /
• 2005

In recent years, as the demands of VBNS(Very high speed Backbone Network Service) and VDSL(Very high-data rate Digital Subscriber Line) increase, the development of kernel parts of optical communication such as PLC(Planar Light Circuit), Coupler, WDM elements increase. The alignment and the attachment technology are very important to fabricate the optical elements for communication. In this paper, the mechanism of rotational stage are studied. with the three different method and the results of them are applied to the design of the system. The performance test of resolution and travel is performed.

• ETRI Journal
• /
• v.33 no.2
• /
• pp.259-266
• /
• 2011

We present a new method for an automated markerless system to describe, analyze, and classify human gait motion. The automated system consists of three stages: I) detection and extraction of the moving human body and its contour from image sequences, ii) extraction of gait figures by the joint angles and body points, and iii) analysis of motion parameters and feature extraction for classifying human gait. A sequential set of 2D stick figures is used to represent the human gait motion, and the features based on motion parameters are determined from the sequence of extracted gait figures. Then, a k-nearest neighbor classifier is used to classify the gait patterns. In experiments, this provides an alternative estimate of biomechanical parameters on a large population of subjects, suggesting that the estimate of variance by marker-based techniques appeared generous. This is a very effective and well-defined representation method for analyzing the gait motion. As such, the markerless approach confirms uniqueness of the gait as earlier studies and encourages further development along these lines.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.4 no.2
• /
• pp.109-115
• /
• 2002

With the objective of selecting suitable breeding resource material, 10 polyvoltine and 10 bivoltine breeds were drawn from the germplasm collection of Central Sericultural Research and Training Institute, Mysore, and evaluated for 3 seasons comprising one year (6 trials). Data were collected on seven traits of economic importance such as fecundity, pupation rate, cocoon yield, cocoon weight, cocoon shell weight, cocoon shell ratio and filament length, and statistically analysed with two-way classification, Joint scoring method and evaluation index. Significant seasonal variations (P < 0.01) were observed in both polyvoltine and bivoltine breeds. Polyvoltines BL27, BL36 and BL54 and bivoltines CSR2, CSR4 and Daizo scored highest ranking values in all the three methods. Hybridization was initiated based on larval markings and cocoon shapes. Seasonal variations were discussed.

• Culinary science and hospitality research
• /
• v.7 no.2
• /
• pp.1-24
• /
• 2001

A Study on the strategic methods for internal marketing of Family Restaurant. We know that customer satisfaction in measuring the effect of marketing performance on employees in service industry. There are four strategies of internal marketing for service-employee, which are participation-promotion and manner-management of employee, classification to employee, communication strategy, motivation environment for employee. First, communication, sales and service technology of employee can be developed and improved through the education and training. Second, company can make better achievement by classifying life-style and individual desire. Third, communication strategy can improve service quality by development of team-work through the confidence and joint-responsibility. Fourth. the company make environment which employee can compete by offering incentive fairly and properly. In the conclusion, when employees serve customers in a depressed attitude, they neglect service process and bring about customer non-satisfaction. This have negative effect on external customer satisfaction in the short term. And so that customer-satisfaction can't exist without employee-satisfaction. that is job-satisfaction is the goal of company. therefore study about internal marketing action should be go on.

• Journal of Applied Reliability
• /
• v.17 no.3
• /
• pp.197-206
• /
• 2017

Purpose: Clarify the cause of the noise by the front wheel strut insulator, which is located in close proximity to the driver's seat. Methods: The improvement mechanism was confirmed through failure analysis and reproduction test of the joint generation mechanism. In addition, the main factors were analyzed through principal test. Results: This paper describes the mechanism of occurrence of noise due to deterioration and hardness increase of rubber, deformation on severe road surface, foreign matter and water inflow in cold weather. Conclusion: We found that the insulator and body deformation can be minimized without increasing the thickness of the body and the insulator and reinforcing the body by dispersing the input load by applying load distribution structure instead of the local forming structure of the insulator in the insulator robust structure.

• Proceedings of the KSR Conference
• /
• 2002.10a
• /
• pp.672-677
• /
• 2002

Railway bridge type has been mainly selected by a intersection of roads and rivers, and economy. Now a days, it is required that the bridge type is considered a harmony with circumstances, a beauty and an expression of symbol of regions because of the enlargement of bridge structures and the advance of people's consciousness level. So it is adopted arch bridge with fan type hanger for a outer beautiful sight and a symbol of development of regions as 80m intersection bridge of railway and former national road at pal hung bridge in jolla line lot 1. It is performed that an examination, a consultation, a design of member sections and a detail analysis of joint parts according to the basic design. It is also performed a dynamic analysis with design loads and train loads reflection on railway bridge characteristics and examined a safety and a propriety of design compare with a fatigue design and design rules.

• Journal of the Korean Society for Precision Engineering
• /
• v.31 no.3
• /
• pp.243-251
• /
• 2014

In inference fit assembly process of the industrial robot, it basically needs the force data. One of the typical methods to get the force data is attaching torque sensors on the robot arm joint or end effector. This is effective way to reduce time delay and to improve preciseness of force control, but this method has several problems. To solve that problem, this paper suggests method which measures assembly force without torque sensor by using the sliding perturbation observer(SPO) and assembly process based on SPO to assemble successfully in inference assembly

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2017.11a
• /
• pp.181-182
• /
• 2017

This study analyzed the performance of new construction technology in construction site. The main results are as follows. First, 83.6% of the new technologies developed by SMEs(joint development by large enterprises) account for the majority. Second, new construction technology is mainly applied to construction and civil engineering, but it is mainly applied to four major types of work(waterproofing, soil and foundation, reinforced concrete, bridge). Third, the number of on-site applications with a construction value of less than 500 million accounted for 89.5% of the total, which indicates that new construction techniques are mainly applied to small-scale construction.

• Journal of the Korean Institute of Educational Facilities
• /
• v.21 no.5
• /
• pp.23-29
• /
• 2014

It is evident that the education of architecture is being transformed under the influence of technological, environmental, social, and financial challenges. BIM application for design education is innovative responses that are expected to provide the high ground for the AEC industry. So the purpose of this paper introduces that application of BIM for design education of students is efficiency and effectiveness through an actual experiment by elementary school project. The results by actual experiment elaborate the role of BIM in architectural education and its appropriate place in the curriculum. Also they state that increasingly complex nature of professional world that is reliant on design teams, joint development efforts, and more complex design projects makes obsolete the designer who is trained as solo artist engaging in competitive and individual pursuits.