• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.4
• /
• pp.667-676
• /
• 2002

Many studies on the finite element modeling for bolted joints have proceeded, but the structures with bolted joints are complicated in shape and it is difficult to find out the characteristics according to joint condition. Usually, experimental methods have been used for bolted joint analysis. A reliable and practical finite element modeling technique for structure with bolted joints is very important for engineers in industry. In this study, three kinds of model are presented; a detailed model, a practical model and a simple model. The detailed model is modeled by using 3-D solid element and gap element, and the practical model is modeled by using shell element (a portion of bolt head) and beam element (a portion of bolt body), the simple model is modeled by simplifying practical model without using gap elements. Among these models, the simple model has the least degree of freedom and show the effect of memory reduction of 59%, when compared with the detailed model.

• ETRI Journal
• /
• v.41 no.5
• /
• pp.626-636
• /
• 2019

A novel algorithm for joint user selection and optimal power allocation for Stackelberg game-based revenue maximization in a downlink non-orthogonal multiple access (NOMA) network is proposed in this study. The condition for the existence of optimal solution is derived by assuming perfect channel state information (CSI) at the transmitter. The Lagrange multiplier method is used to convert the revenue maximization problem into a set of quadratic equations that are reduced to a regular chain of expressions. The optimal solution is obtained via a univariate iterative procedure. A simple algorithm for joint optimal user selection and power calculation is presented and exhibits extremely low complexity. Furthermore, an outage analysis is presented to evaluate the performance degradation when perfect CSI is not available. The simulation results indicate that at 5-dB signal-to-noise ratio (SNR), revenue of the base station improves by at least 15.2% for the proposed algorithm when compared to suboptimal schemes. Other performance metrics of NOMA, such as individual user-rates, fairness index, and outage probability, approach near-optimal values at moderate to high SNRs.

• The Journal of Churna Manual Medicine for Spine and Nerves
• /
• v.14 no.1
• /
• pp.61-76
• /
• 2019

Objectives : The purpose of this study was to report the clinical results of various medical methods (including Chuna joint mobilization) used to treat a single patient with polyneuritis. Methods : We treated a 46 year-old female patient diagnosed with polyneuritis using various methods, including acupuncture, moxibustion, infrared therapy, herbal medication, Western medication, Chuna manual therapy, and physical therapy. We evaluated the results using the numeric rating scale (NRS), manual muscle test (MMT), active range of motion (ROM), modified barthel index (MBI). Other evaluation scale included Deep tendon reflex and thickness of muscle especially forearm and lower leg. Results : Following treatment using a combination of the above methods, the general overall condition of the patients was significantly improved. Furthermore, the NRS, MMT, MBI, and the active ROM scores were numerically improved. Conclusions : In this case, a single patient with polyneuritis was treated using a combination of Korean and Western medical methods. Although this study provides useful insight into treatment methods, further studies are required to determine the treatment effects of Korean medicine, specifically Chuna manual therapy, in patients with polyneuritis.

• Journal of muscle and joint health
• /
• v.25 no.3
• /
• pp.196-204
• /
• 2018

Purpose: The purpose of this study was to contribute to the activation of comprehensive nursing care services by comparing and analyzing the working environment and operational status of comprehensive nursing care wards with general wards. Methods: A questionnaire survey was conducted at hospitals operating comprehensive nursing care services. We collected data on patient characteristics, workforce, working environment, and work support facilities of 40 hospitals voluntarily participating in the survey. The collected data were analyzed by dividing it into an comprehensive nursing care ward and a general ward. Results: Compared with the general ward, the comprehensive nursing care ward had fewer hospitalized patients, but the severity of the patients and the need for nursing were high. The number of nurses, assistant nurses, and ward support workers per patient was higher in the comprehensive nursing care ward than in the general ward, and the implementation rate of night shift fixed system, the fixed shift system, and the preceptor system were higher. In terms of structural environment, comprehensive nursing care wards had more room for interviews. Conclusion: The comprehensive nursing care ward had more nursing staff and provided a better working environment than the general ward, but required additional support for the structural environment.

• Journal of Genetic Medicine
• /
• v.16 no.1
• /
• pp.43-47
• /
• 2019

Ehlers-Danlos syndrome (EDS) VIII is an autosomal dominant inherited connective tissue disorder characterized by intractable periodontal inflammation, absence of gingiva, pretibial plaques, skin hyperextensibility, joint hypermobility, and tissue fragility with onset in the childhood or adolescence. In a recent report, heterozygous variants of the C1R or C1S related to the classical complement pathway were identified in families with history of EDS VIII. The current report describes a Korean 34-year-old female carrying a novel missense variant of C1R c.925T>G (p.Cys309Gly) and exhibiting early severe periodontitis, skin fragility, and joint hypermobility. The patient also had frontal, parietal, and temporal white matter brain lesions without definite vascular abnormalities on brain magnetic resonance imaging, which have not been surveyed meticulously in EDS VIII. Considering the genetic alteration of classic complement pathways in this condition, it is necessary to carefully observe multisystemic inflammation processes such as changes in brain white matter.

• Earthquakes and Structures
• /
• v.16 no.5
• /
• pp.533-546
• /
• 2019

This study presents an experimental investigation on six beam-column joint specimens under the lateral cyclic loading. The aim was to explore the effectiveness of steel fiber-reinforced concrete (SFRC) in reducing the transverse shear stirrups in beam-column joints of the reinforced concrete (RC) frames with strong-columns and weak-beams. Two RC and four SFRC specimens with different types of reinforcement detailing and steel fibers of volume fraction in the range of 0.75-1.5% were tested under gradually increasing cyclic displacements. The main parameters investigated were lateral load-resisting capacity, hysteresis response, energy dissipation capacity, stiffness degradation, viscous damping variation, and mode of failure. Test results showed that the diagonally bent configuration of beam longitudinal bars in the beam-column joints resulted in the shear failure at the joint region against the flexural failure of beams having straight bar configurations. However, all SFRC specimens exhibited similar lateral strength, energy dissipation potential and mode of failure even in the absence of transverse steel in the beam-column joints. Finally, a methodology has been proposed to compute the shear strength of SFRC beam-column joints under the lateral loading condition.

• Journal of the Architectural Institute of Korea Structure & Construction
• /
• v.36 no.2
• /
• pp.127-136
• /
• 2020

Prism compressive strength is the most influential parameter to evaluate the seismic performance of non-structural concrete brick masonry walls, and is affected by the practice and workmanship of masonry workers. This study experimentally investigates the influence of workmanship on prism compressive strength throughout the compressive test with prism specimens constructed according to masonry workmanship. To do this, the workmanship is categorized into good, fair, and poor conditions which are statistically evaluated with thickness and indentation depth of bed-joints. Then, the effect of workmanship on the structural properties of masonry prisms is evaluated by investigating relations between properties such as their compressive strength, elastic modulus and numerical parameters such as thickness, filling of bed-joints. This study demonstrates that the indentation depth is more important parameter for structural properties of masonry prisms and masonry prisms with loss in bed-joint area less than of 7% can be in fair condition.

• Journal of the Korean Society of Mechanical Technology
• /
• v.20 no.6
• /
• pp.947-956
• /
• 2018

This research has been conducted to design upright parts of hand-made vehicles with the purpose of reducing material and machining cost while ensuring structural safety. Aluminum knuckles were modelled with three parts in order to enhance design flexibility as well as to reduce CNC machining cost. A vehicle model was constructed in CAD program and simulated in ADAMS View in order to estimate joint forces developing during 20 degree step steering condition at 60km/h. The joint forces obtained in the vehicle dynamics simulation were used for the structural analysis in ANSYS and dimensions of knuckle parts were adjusted until the lowest safety factor reached 2.0. The weight of knuckle decreased by 50% compared to the previous version that was designed without the structural analysis. The overall manufacturing cost decreased by 33% due to the reduction in the material as well as the CNC machining effort.

• Clinics in Shoulder and Elbow
• /
• v.25 no.3
• /
• pp.240-243
• /
• 2022

Isolated deltoid paralysis is a rare pathology that can occur after axillary nerve injury due to shoulder trauma or infection. This condition leads to loss of deltoid function that can cause glenohumeral instability and inferior subluxation, resulting in rotator cuff muscle fatigue and pain. To establish dynamic glenohumeral stability, a novel technique was invented. Humeral suspension is achieved using a double button implant with non-resorbable high strength cords between the acromion and humeral head. This novel technique was used in two patients with isolated deltoid paralysis due to axillary nerve injury. The results indicate that the humeral suspension technique is a method that supports centralizing the humeral head and simultaneously dynamically stabilizes the glenohumeral joint. This approach yielded high patient satisfaction and reduced pain. Glenohumeral alignment was improved and remained intact 5 years postoperative. The humeral suspension technique is a promising surgical method for subluxated glenohumeral joint instability due to isolated deltoid paralysis.

• Journal of Acupuncture Research
• /
• v.40 no.1
• /
• pp.90-96
• /
• 2023

The discoid meniscus is an innate modified form of the meniscus, characterized by middle hypertrophy and a larger than the regular diameter, leading to an absence of the characteristic "C" arrangement. Previously, no study has reported the traditional Korean medicine treatment of knee pain mainly due to discoid meniscus. Here, we report two cases of a discoid meniscus of the knee as the cause of knee pain. Patients were diagnosed with magnetic resonance imaging for discoid meniscus and received traditional Korean medicine treatments, including pharmacopuncture, acupuncture, herbal medicine, and chuna. The pain was alleviated when assessed by patient-reported pain scale scores, and the general knee condition was improved. Thus, traditional Korean medicine treatments could be effective for patients who had discoid meniscus of the knee joint in this case report.