• Journal of Broadcast Engineering
• /
• v.16 no.2
• /
• pp.216-225
• /
• 2011

Following the proliferation of three-dimensional video contents and displays, many terrestrial broadcasting companies have been preparing for stereoscopic 3DTV service. In terrestrial stereoscopic broadcast, it is a difficult task to code and transmit two video sequences while sustaining as high quality as 2DTV broadcast due to the limited bandwidth defined by the existing digital TV standards such as ATSC. Thus, a terrestrial 3DTV broadcasting with a heterogeneous video codec system, where the left image and right images are based on MPEG-2 and H.264/AVC, respectively, is considered in order to achieve both high quality broadcasting service and compatibility for the existing 2DTV viewers. Without significant change in the current terrestrial broadcasting systems, we propose a joint rate control scheme for stereoscopic 3DTV service based on the heterogeneous dual codec systems. The proposed joint rate control scheme applies to the MPEG-2 encoder a quadratic rate-quantization model which is adopted in the H.264/AVC. Then the controller is designed for the sum of the left and right bitstreams to meet the bandwidth requirement of broadcasting standards while the sum of image distortions is minimized by adjusting quantization parameter obtained from the proposed optimization scheme. Besides, we consider a condition on maintaining quality difference between the left and right images around a desired level in the optimization in order to mitigate negative effects on human visual system. Experimental results demonstrate that the proposed bit rate control scheme outperforms the rate control method where each video coding standard uses its own bit rate control algorithm independently in terms of the increase in PSNR by 2.02%, the decrease in the average absolute quality difference by 77.6% and the reduction in the variance of the quality difference by 74.38%.

• The Journal of Engineering Geology
• /
• v.18 no.4
• /
• pp.447-457
• /
• 2008

Laboratory tests for single plane sliding were conducted using the model rock slope to investigate the cut slope deformability and failure mechanism due to combined effect of engineering characteristics such as angle of sliding plane, water force, joint roughness and infillings. Also the possibility of prediction of slope failure through displacement monitoring was explored. The joint roughness was prepared in forms of saw-tooth type having different roughness specifications. The infillings was maintained between upper and lower roughness plane from zero to 1.2 times of the amplitude of the surface projections. Water force was expressed as the percent filling of tension crack from dry (0%) to full (100%), and constantly increased from 0% at the rate of 0.5%/min and 1%/min upto failure. Total of 50 tests were performed at sliding angles of $30^{\circ}$ and $35^{\circ}$ based on different combinations of joint roughness, infilling thickness and water force increment conditions. For smooth sliding plane, it was found that the linear type of deformability exhibited irrespective of the infilling thickness and water force conditions. For sliding planes having roughness, stepping or exponential types of deformability were predominant under condition that the infilling thickness is lower or higher than asperity height, respectively. These arise from the fact that, once the infilling thickness exceeds asperities, strength and deformability of the sliding plane is controlled by the engineering characteristics of the infilling materials. The results obtained in this study clearly show that the water force at failure was found to increase with increasing joint roughness, and to decrease with increasing filling thickness. It seems possible to estimate failure time using the inverse velocity method for sliding plane having exponential type of deformability. However, it is necessary to estimate failure time by trial and error basis to predict failure of the slope accurately.

• Journal of the Korean Orthopaedic Association
• /
• v.56 no.5
• /
• pp.404-412
• /
• 2021

Purpose: This study examined the degree of cartilage regeneration by performing second-look arthroscopy in a group of patients who underwent high tibial osteotomy and microfractures for unicompartmental osteoarthritis of the medial knee joint and to determine the factors affecting cartilage regeneration. In addition, this study analyzed whether there is a relationship between the degree of cartilage regeneration and functional results. Materials and Methods: From 2007 to 2015, this study evaluated 81 cases who underwent second-look arthroscopy at the time of plate removal after a microfracture and high tibial osteotomy with a minimum two-year follow-up. The degree of femoral cartilage injury before surgery was classified by ICRS (International Cartilage Research Society), and all were grade III and IV. After second-look arthroscopy, cartilage regeneration was classified into a well-regenerated group (grade I, II) and a poorly regenerated group (grade III, IV). The independent factors influencing cartilage regeneration were identified through multivariate logistic regression analysis. In addition, the functional results were compared before and after surgery between the two groups using the Knee Society score (KSS) and the Western Ontario and McMaster Universities Osteoarthritis Index score (WOMAC). Results: Age, sex, body mass index, postoperative radiologic factors, and preoperative joint condition did not affect the degree of cartilage regeneration significantly. The large cartilage defect (≥2.0 cm²) (p=0.011) and the presence of kissing lesions (p=0.027) were associated with poor cartilage regeneration. No significant difference in the KSS and WOMAC scores was observed between the group with good and poor cartilage regeneration. Conclusion: The presence of a large cartilage defect and kissing lesions is associated with poor cartilage regeneration after high tibial osteotomy and microfracture. On the other hand, the degree of the regenerated cartilage did not show any correlation with the functional outcome.

• Journal of East-West Nursing Research
• /
• v.13 no.2
• /
• pp.160-169
• /
• 2007

Background: Hwa-Byung is known as a specific Korean cultural syndrome which corresponds to DSM-IV(MMPI). Some Korean women who have experienced heart aching anger(Hwa-Byung) complain physical pains as well as psychological problems. As for these physical pains, upper limb arthropathy(e.g. golf elbow pains, tennis elbow pains, or shoulder-joint pains) have not been paid attentions. In spite of not having done her excessive physical endeavor or exercise, some Korean middle aged women complain those arthropathy pains. And they go round orthopedics, pain clinics, and oriental medicine clinics. Purpose: This study was practiced in Severance Oriental Medicine Clinic. The oriental medicine doctor had a question about the major origin of upper limb pains which were not caused by excessive physical endeavor. To answer the question, this study has been practiced. In the process of interview with some those women, the major cause of those syndromes has been revealed as Hwa-Byung. The purpose of this study is to discover the meanings of the women's life who have been experienced Hwa-Byung with upper limb arthropathy. Results: These upper limb arthropathy can be explained by meridian theory. Shoulder-joint pain and golf elbow with Hwabyung can be explained by Heart meridian of hand-shoyin and the points of these pains are in the flow of this meridian. Tennis elbow with Hwabyung can be explained by Small intestine meridian of hand-taiyang and this point is in the flow of this meridian. The results of interview with 9 middle aged women was analyzed and interpreted according to Spradley's method of ethnography. The analysis revealed three core cultural themes : 1) There are certainly external cause to provoke Hwa-Byung. A patricentric family system, husband's playing around with another woman, cruel treatment by husband's family, or financial failure may be present anteriorly. 2) The chief existing condition is the discord between husband and wife. The stoppage of mutual communication, lacking in understanding, unfeeling, heartless, or unsympathetic is an major phenomenon of married life. So the important factor is not the sexual relations or problems but the discords of communication. 3) The feeling of anger, the sense of nihility, the desire to escape, and the effort to forgiveness coexist together. At a glance, they seemed to be a process. For example, anger seemed to present at first, then nihility seemed at second, then escape seemed at third, and then forgiveness seemed at last. But at point of visiting clinic to be treated, they are mixed up together as if in a jumble.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.37 no.5
• /
• pp.94-104
• /
• 2000

The accuracy and reliability of the target tracking is very critical issue in the design of automotive collision warning radar A significant problem in multi-target tracking (MTT) is the target-to-measurement data association If an incorrect measurement is associated with a target, the target could diverge the track and be prematurely terminated or cause other targets to also diverge the track. Most methods for target-to-measurement data association tend to coalesce neighboring targets Therefore, many algorithms have been developed to solve this data association problem. In this paper, a new multi-target data association method based on order statistics is described The new approaches. called the order statistics probabilistic data association (OSPDA) and the order statistics joint probabilistic data association (OSJPDA), are formulated using the association probabilities of the probabilistic data association (PDA) and the joint probabilistic data association (JPDA) filters, respectively Using the decision logic. an optimal or near optimal target-to-measurement data association is made A computer simulation of the proposed method in a heavy cluttered condition is given, including a comparison With the nearest-neighbor CNN). the PDA, and the JPDA filters, Simulation results show that the performances of the OSPDA filter and the OSJPDA filter are superior to those of the PDA filter and the JPDA filter in terms of tracking accuracy about 18% and 19%, respectively In addition, the proposed method is implemented using a developed digital signal processing (DSP) board which can be interfaced with the engine control unit (ECU) of car engine and with the d?xer through the controller area network (CAN)

• Physical Therapy Korea
• /
• v.25 no.2
• /
• pp.1-12
• /
• 2018

Background: It is very difficult for hemiplegic patients to effectively perform the sit-to-stand (STS) movements independently because of several factors. Moreover, the analysis of STS motion in hemiplegic patients has been thus far confined to only muscle strength evaluation with little information available on structural and environmental factors of varying chair height and foot conditions. Objects: This study aimed to analyze the change in biomechanical factors (ground reaction force, center of mass displacement, and the angle and moment of joints) of the joints in the lower extremities with varying chair height and foot conditions in hemiplegic patients while they performed the STS movements. Methods: Nine hemiplegic patients voluntarily participated in this study. Their STS movements was analyzed in a total of nine sessions (one set of three consecutive sessions) with varying chair height and foot conditions. The biomechanical factors of the joints in the lower extremities were measured during the movements. Ground reaction force was measured using a force plate; and the other abovementioned parameters were measured using an infra-red camera. Two-way repeated analysis of variance was performed to determine the changes in biomechanical factors in the lower extremities with varying chair height and foot conditions. Results: No interaction was found between chair height and foot conditions (p>.05). All measured variables with varying chair height showed a significant difference (p<.05). Maximum joint flexion angle, maximum joint moment, and the displacement of the center of mass in foot conditions showed a significant difference (p<.05); however the maximum ground reaction force did not show a significant difference (p>.05). Conclusion: The findings suggest that hemiplegic patients can more stably and efficiently perform the STS movement with increased chair height and while they are bare-foot.

• Journal of the Korean Dietetic Association
• /
• v.5 no.1
• /
• pp.74-84
• /
• 1999

The purpose of this study was to investigate a plan of middle/high school foodservice systems which could properly provide nutrition for juveniles' health. Questionnaires were developed and distributed to: 245 middle schools with 271 parents, 328 students, 180 teachers, and 345 administrators; 163 high-schools with 223 parents, 466 students, 179 teachers, and 163 administrators in Seoul and Kyunggi province. The results of this study were as followed. For the desirable feeding type as in-school meal plan, 62.2% responded to the current elementary school feeing type:10.3% responded to a lunch-box prepared at home; and 38.0% responded to free dining out type. For a feeding operation type, school administrators, teachers and parents favored the current school feeding systems in elementary schools with proportion of 68.2%, 47.7%, and 87.6% as respectively. Also, 20.3% of school administrators, 22.6% of teachers, and 6.9% of parents preferred contract management. A total of 27.6% of teachers, 9.2% of school administrators, and 3.7% of parents responded to a lunch-box prepared at home. There was a significant difference between the responses for establishing the main body of financial burden to solve the problem of financial burden which could be the most obstacle to bring middle/high school feeding system into operation. For the management of school feeding systems when brought into operation, 88.7% out of 470 responded schools and 89.9% out of 227 responded teachers reported that an expert should manage school feeding systems. For futuristic direction, an effective joint cooking type between schools which may be the way to solve the difficulties in securing the appropriate space and to decrease the financial burden, the problem of transportation for delivering feeding products, low quality of feeding, and sanitation can occur. Therefore, the distance between schools which operate a joint cooking system will affect as a major factor. Furthermore, concrete examination of plans for introduction of various types of school feeding and institutional devices for management system and supervision of operation should become a condition precedent.

• Proceedings of the Korean Society of Developmental Biology Conference
• /
• 2001.10a
• /
• pp.37-43
• /
• 2001

1. About fifty thousand of cattle embryos were transferred and 16000 ET-calves were born in 1999. Eighty percents of embryos were collected from Japanese Black beef donors and transferred to dairy Holstein heifers and cows. Since 1985, we have achieved in bovine in vitro fertilization using immature oocytes collected from ovaries of slaughterhouse. Now over 8000 embryos fertilized by Japanese Black bull, as Kitaguni 7~8 or Mitsufuku, famousbulls as high marbling score of progeny tests were sold to dairy farmers and transferred to their dairy cattle every year. 2. Embryo splitting for identical twins is demonstrated an useful tool to supply a bull for semen collection and a steer for beef performance test. According to the data of Dr. Hashiyada(2001), 296 pairs of split-half embryos were transferred to recipients and 98 gave births of 112 calves (23 pairs of identical twins and 66 singletons). 3. A blastomere-nuclear-transferred cloned calf was born in 1990 by a joint research with Drs. Tsunoda, National Institute of Animal Industry (NIAI) and Ushijima, Chiba Prefectural Farm Animal Center. The fruits of this technology were applied to the production of a calf from a cell of long-term-cultured inner cell mass (1988, Itoh et al, ZEN-NOH Central Research Institute for Feed and Livestock) and a cloned calf from three-successive-cloning (1997, Tsunoda et al.). According to the survey of MAFF of Japan, over 500 calves were born until this year and a glaf of them were already brought to the market for beef. 4. After the report of "Dolly", in February 1997, the first somatic cell clone female calves were born in July 1998 as the fruits of the joint research organized by Dr. Tsunoda in Kinki University (Kato et al, 2000). The male calves were born in August and September 1998 by the collaboration with NIAI and Kagoshima Prefecture. Then 244 calves, four pigs and a kid of goat were now born in 36 institutes of Japan. 5. Somatic cell cloning in farm animal production will bring us as effective reproductive method of elite-dairy- cows, super-cows and excellent bulls. The effect of making copy farm animal is also related to the reservation of genetic resources and re-creation of a male bull from a castrated steer of excellent marbling beef. Cloning of genetically modified animals is most promising to making pig organs transplant to people and providing protein drugs in milk of pig, goat and cattle. 6. Farm animal cloning is one of the most dreamful technologies of 21th century. It is necessary to develop this technology more efficient and stable as realistic technology of the farm animal production. We are making researches related to the best condition of donor cells for high productivity of cloning, genetic analysis of cloned animals, growth and performance abilities of clone cattle and pathological and genetical analysis of high rates of abortion and stillbirth of clone calves (about 30% of periparutum mortality). 7. It is requested in the report of Ministry of Health, labor and Welfare to make clear that carbon-copy cattle(somatic cell clone cattle) are safe and heathy for a commercial market since the somatic cell cloning is a completely new technology. Fattened beef steers (well-proved normal growth) and milking cows(shown a good fertility) are now provided for the assessment of food safety.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.11 no.4
• /
• pp.216-230
• /
• 1999

A Galerkin finite element model for the analysis of harbor oscillation has been developed based on the extended mild-slope equation. Infinite elements are used to accomodate the radiation condition at infinity and joint elements to treat the matching conditions at the harbor entrance which include the energy loss due to flow separation. The numerical tests for rectangular harbors with fully or partially open entrances show that the energy loss at the harbor entrance considerably reduces the the amplification ratios at the innermost parts of the harbors and that the amplification ratios decrease considerably with increasing incident wave heights and jet lengths at the harbor entrance. Application of the model to the Gamcheon harbor show that when the incident wave amplitude is small the amplification ratios rather increase when the entrance energy loss is included than when ignored because of the shift of the resonance periods. Even though the entrance energy loss was insignificant for the measured long-period incident waves, it would be of great importance if the incident waves were large as in the attack of tsunamis. The resonance period of the Helmholtz mode at the Gamcheon Harbor was calculated to be 31 minutes, which agrees well with the measured one between 27 and 33.3 minutes. The measured resonance periods between 9.4 and 12.1 minutes and 5.2 and 6.2 minutes were also calculated by the numerical model as 10.4 minutes and 6.6 or 5.6 minutes, indicating good performance of the model. On the other hand, it was shown that a variety of oscillation modes exists in the Gamcheon Harbor and lateral resonances of considerable amplification ratios also exist at the periods of 3.6 and 1.6 minutes as in the Young-II Bay.

• Journal of Periodontal and Implant Science
• /
• v.47 no.4
• /
• pp.211-218
• /
• 2017

Purpose: The purpose of the present study was to perform a pattern analysis in patients with temporomandibular disorder (TMD) resulting from unilateral mastication due to chronic periodontitis. Methods: Thirty participants with signs or symptoms of TMD who engaged in unilateral mastication due to periodontitis-related discomfort (test group) were selected. Another 30 subjects exhibiting signs or symptoms of TMD resulting from unilateral mastication not due to chronic periodontitis (control group) were also recruited. An interview-based questionnaire was administered, and an examination of the temporomandibular joint (TMJ) with determination of periodontal status was performed. Results: The duration of unilateral mastication was significantly longer in the control group than in the test group. There was a significant negative correlation between the duration of unilateral mastication and the Community Periodontal Index score. Using the Research Diagnostic Criteria for TMD (RDC/TMD) axis I algorithms, all the subjects were assigned to 3 main groups. The test group exhibited significantly a higher diagnostic distribution of group III (arthralgia, osteoarthritis, or osteoarthrosis), and in both the test and control groups, the number of diagnoses was larger for the non-chewing side. The control group showed a significantly higher diagnostic distribution of group I (myofacial pain), and in both the test and control groups, the number of diagnoses was larger for the chewing side. Conclusions: The results of the present study indicate that unilateral mastication due to chronic periodontitis could induce not only pain but also structural TMJ changes if adequate treatment is not administered and supported within a short time from the onset of the condition. Therefore, immediate treatment of chronic periodontitis is recommended to prevent not only the primary progress of periodontal disease, but also secondary TMJ-related problems. Furthermore, subjects who have suffered chronic long-term periodontitis without treatment should be urged to undergo a TMJ examination.