• The Korea Journal of Herbology
• /
• v.34 no.4
• /
• pp.27-35
• /
• 2019

Objectives : Osteoarthritis is characterized by degeneration of articular cartilage, which is characterized by chronic pain, stiffness and decrease range of motion. The present study was designed to compare the therapeutic effect of Dioscoreae Rhizoma water extract (DRW) and Dioscoreae Rhizoma 30% ethanol extract (DRE) on the monosodium iodoacetate (MIA)-induced osteoarthritis rats. Methods : Osteoarthritis was induced by injection of MIA ($50{\mu}{\ell}$ with $80mg/m{\ell}$) into the knee joint cavity of rats. After adaptation period for seven days, rats were divided by 5 groups (n=10/group): normal group, control group, positive control (indomethacin 5 mg/kg), DRW 200 mg/kg treated group, DRE 200 mg/kg treated group (n=10/group). The hind paw weight distribution was measured with the changes of reactive oxygen species (ROS), peroxynitrite ($ONOO^-$) in articulation tissue. Also, the cyclooxygenase-2 (COX-2), inducible nitric oxide synthase (iNOS), tumor necrosis factoralpha ($TNF{\alpha}$), interleukin-6 (IL-6), matrix metalloproteinase-1 (MMP-1), and tissue inhibitor of metalloproteinases-1 (TIMP-1) were investigated by western blot analysis. Results : The administration of DRW and DRE significantly decreased the hind paw weight distribution. The ROS and $ONOO^-$ levels of cartilaginous tissue were significantly decreased in DRW and DRE compared to control group. The results showed that DRE decreased inflammatory cytokines such as iNOS and $TNF{\alpha}$. Also DRE decreased MMP-1 and increased TIMP-1. Conclusions : Based on the above results, Dioscoreae Rhizoma extract seems to have the therapeutic effect on osteoarthritis via suppression of inflammation.

• The Journal of Korean Academy of Prosthodontics
• /
• v.50 no.3
• /
• pp.169-175
• /
• 2012

Purpose: In this study, brazing characteristics of $ZrO_2$ and Ti-6Al-4V brazed joints with increasing temperature were investigated. Materials and methods: The sample size of the $ZrO_2$ was $3mm{\times}3mm{\times}3mm$ (thickness), and Ti-6Al-4V was $10mm(diameter){\times}5mm(thickness)$. The filler metal consisted of Ag-Cu-Sn-Ti was prepared in powder form. The brazing sample was heated in a vacuum furnace under $5{\times}10^{-6}$ torr atmosphere, while the brazing temperature was changed from 700 to $800^{\circ}C$ for 30 min. Results: The experimental results shows that brazed joint of $ZrO_2$ and Ti-6Al-4V occurred at $700-800^{\circ}C$. Brazed joint consisted of Ag-rich matrix and Cu-rich phase. A Cu-Ti intermetallic compounds and a Ti-Sn-Cu-Ag alloy were produced along the Ti-6Al-4V bonded interface. Thickness of the reacted layer along the Ti-6Al-4V bonded interface was increased with brazing temperature. Defect ratios of $ZrO_2$ and Ti-6Al-4V bonded interfaces decreased with brazing temperature. Conclusion: Thickness and defect ratio of brazed joints were decreased with increasing temperature. Zirconia was not wetting with filler metal, because the reaction between $ZrO_2$ and Ti did not occur enough.

• The Journal of the Korean bone and joint tumor society
• /
• v.7 no.1
• /
• pp.28-35
• /
• 2001

Purpose : Authors investigated the efficiency of preoperative MRI in suspicious glomus tumor and the clinical outcomes after marginal excision. Materials and Methods : In 10 cases of glomus tumors in the fingers, authors retrospectively analyzed the clinical data, including previous trauma, treatment history, preoperative symptoms, physical examination, plain radiography, MRI (9 cases), pathological findings and postoperative complications. Results : The patients had pain in 10 cases, tenderness in 9 cases, cold sensitivity in 3 cases and edema in one case. MRI showed low signal (3 cases) or iso-signal (5) intensity on T1 weighted image, high signal intensity (8) on T2 weighted image, and all the lesions were enhanced in gadolinium enhancement images. The exact locations of glomus tumors were median in 6 cases, lateral in 5, lateral fold in 2 and pulp in 3 in transverse section and nail bed in 5 cases and nail matrix in 5 in sagittal section. Marginal excision was performed by lateral approach in one case and transungual in 9 cases. Histologically, all 10 cases were composed of solid sheets of round cells interrupted by thin-walled blood vessels. Most of clinical symptoms were disappeared in all cases after operation. Nail deformity was found in one case, which was originated from nail matrix, however, there was no recurrence. Summary : Clinical symptom was the most impotant factor in diagnosis of glomus tumor in the fingers. However, preoperative MRIs were helpful in patients, who had obscure pain or prolonged clinical symptoms with suspicious glomus tumors. Preoperative MRI might be one of the most useful tools for establishing the exact diagnosis and detecting the location of glomus tumors, in spite of the relatively high expenses.

• Journal of the Microelectronics and Packaging Society
• /
• v.10 no.3
• /
• pp.19-27
• /
• 2003

Surface finishes of PCB laminates are important in the solder joint reliability of flip chip package because the types and thicknesses of intermetallic compound(IMC), and compositions and hardness of solders are affected by them. In this study, effects of surface finishes of PCB on the low cycle fatigue resistance of Sn-based lead-free solders; Sn-3.5Ag, Sn-3.5Ag-XCu(X=0.75, 1.5), Sn-3.5Ag-XBi(X=2.5, 7.5) and Sn-0.7Cu were investigated for the Cu and Au/Ni surface finish treatments. Displacement controlled room temperature lap shear fatigue tests showed that fatigue resistance of Sn-3.5Ag-XCu(X=0.75, 1.5), Sn-3.5Ag and Sn-0.7Cu alloys were more or less the same each other but much better than that of Bi containing alloys regardless of the surface finish layer used. In general, solder joints on the Au/Ni finish showed better fatigue resistance than those on the Cu finish. Cross-sectional fractography revealed microcracks nucleation inside of the interfacial IMC near the solder mask edge, more frequently on the Cu than the Au/Ni surface finish. Macro cracks followed the solder/IMC interface in the Bi containing alloys, while they propagated in the solder matrix in other alloys. It was ascribed to the Bi segregation at the solder/IMC interface and the solid solution hardening effect of Bi in the $\beta-Sn$ matrix.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.42 no.5
• /
• pp.697-704
• /
• 2013

The inhibitory effect of ethanol extracts from Curdrania tricuspidata leaves (CTL) on osteoarthritis was investigated in primary cultured rat cartilage cells and a monosodium-iodoacetate (MIA)-induced arthritis rat model. To identify the effects of CTL 80% ethanol extracts (CTL80) and CTL 10% ethanol extracts (CTL10) against $H_2O_2$ treatment in vitro, cell survival was measured by the MTT assay. Cell survival after $H_2O_2$ treatment increased with CTL80 and CTL10 close to normal up to $300{\mu}g/mL\;H_2O_2$. The mRNA expression of matrix metalloproteinases (MMPs) was determined MMP-7 and MMP-13 (known catabolic factors), were significantly inhibited by CTL 80 and CTL10; a $200{\mu}g/mL$ dose of CTL80 especially decreased MMP-13 expression. In vivo, osteoarthritis was induced by an intra-articular injection of MIA into the knee joints of rats, then CTL80 and CTL10 orally administered daily for 35 days. After the animals were sacrificed, histological evaluations of their knee joints revealed a reduction in polymorphonuclear cell infiltration and smooth synovial lining in the CTL80-500 group. Micro-CT analysis of hind paws from CTL80-500 and CTL10 showed a protection against osteophyte formation, soft tissue swelling, and bone resorption. In conclusion, CTL ethanol extracts are effective in ameliorating joint destruction and cartilage erosion in MIA-induced rats. CTL decreases and normalizes articular cartilage through preventing extracellular matrix degradation and chondrocyte injury, and could potentially serve as a therapeutic treatment for humans.

• Journal of the Korean Arthroscopy Society
• /
• v.15 no.2
• /
• pp.83-91
• /
• 2011

Purpose: Microfracture has been used as a first-line treatment to repair articular cartilage defects. In this study, a new technique using an extracelluar matrix biomembrane to cover the cartilage lesions after microfracture was evaluated in terms of cartilage repairability and clinical outcome compared with conventional microfracture technique in a prospective randomized trial. Materials and Methods: A total of 53 patients (59 cases) without osteoarthritis who had focal full thickness articular cartilage lesions were randomly assigned in two group. Seventeen patients (17 cases) underwent conventional microfracture procedure (control group) and thirty-six patients (42 cases) received microfracture and placing biomembrane cover (ArtiFilm$^{TM}$) concomitantly (experimental group). Clinical assessment was done through 6 months postoperatively using the subjective International Knee Documentation Committee IKDC questionnaire, and visual analog scale (VAS) for pain and satisfaction. Magnetic resonance imaging (MRI) was performed at 6 months after the operation in all patients. Results: In clinical outcomes, the significant difference was observed between both groups in IKDC, but not in VAS for pain and for satisfaction (final outcomes of IKDC, p=0.001; VAS for pain, p=0.074; VAS for satisfaction, p=0.194). The MRI showed good to complete defect fill (67 to 100%) in 33 patients (78.6%) of experimental group and 4 patients (23.5%) of control group, respectively. In control group, 9 of 17 patients (52.9%) showed poor defect fill (less than 33%), whereas 5 (11.9%) in experimental group (p=0.001). Assessment of peripheral integration revealed no gap formation in 35 patients (83.3%) in experimental group and 6 patients (35.3%) in control group (p=0.001). No serious complications or adverse effects related to the biomembrane were found. Conclusion: Good short-term follow-up clinical results were obtained in the group whose cartilage defects in the knee joint were covered with biomembrane after the microfracture, with the MRI findings confirming the excellent regeneration of the defective cartilage area. This suggests that the surgery to cover the defective area with biomembrane (ArtiFilm$^{TM}$) after the microfracture procedure is a safe, more effective treatment to induce cartilage regeneration.

• Journal of Acupuncture Research
• /
• v.19 no.2
• /
• pp.51-64
• /
• 2002

We have compared(using the same series of experimental tissue samples) the levels of proteolytic enzyme activities and free radical-induced protein damage in synovial fluid from RA and CPH cases. Many protease types showed significantly increased (typically by a factor of approximately 2-3-fold) activity in RA, compared to normal rats. However, CPH significantly reduced the cytoplasmic enzyme activities of arginyl aminopeptidase, leucyl aminopeptidase, pyroglutamyl aminopeptidase, tripeptidyl aminopeptidase, and proline endopeptidase to almost about 1/10 each. For the Iysosomal proteases, synovial fluid samples from RA rats, CPH significantly reduced the enzyme activities of cathepsin B, dipeptidyl aminopeptidase I and dipeptidyl aminopeptidase II. In extracellular matrix degrading(collagenase, tissue elastase) and leukocyte as sociated proteases (leukocyte elastase, cathepsin G), CPH decreased these enzyme activities of collagenase, tissue elastase and leukocyte associated elastase in RA. In cytoplasmic and lysosomal protease activities in plasma from RA. CPH and normal plasma samples were not significantly different, suggesting that altered activity of plasma proteases (particularly those enzymes putatively involved in the immune response) is not a contributory factor in the pathogenesis of RA. In addition, the level of free radical induced damage to synovial fluid proteins was approximately twice that in RA, compared with CPH. CPH significantly decreased the level of ROS induced oxidative damage to synovial fluid proteins (quantified as protein carbonyl derivative). Therefore we conclude that both proteolytic enzymes and free radicals are likely to be of equal potential importance as damaging agents in the pathogenesis of inflammatory joint disease, and that the design of novel therapeutic strategies for patients with the latter disorder should include both protease inhibitory and free radical scavenging elements. In addition, the protease inhibitory element should be designed to inhibit the action of a broad range of protease mechanistic types (i.e. cysteine-, metallo- and serine- proteinases and peptidases). However, increased protein damage induced by ROS could not be rationalised in terms of compromised antioxidant total capacity, since the latter was not significantly altered in RA synovial fluid or plasma compared with CPH.

• Journal of Life Science
• /
• v.25 no.6
• /
• pp.693-702
• /
• 2015

Blocking new blood-vessel formation (angiogenesis) is now recognized as a useful approach to the therapeutic treatment of many solid tumors. The best validated approach to date is to target the vascular endothelial growth-factor (VEGF) pathway, a key regulator of angiogenesis. Many natural products and extracts that contain a variety of chemopreventive compounds have been shown to suppress the development of malignancies through their anti-angiogenic properties. Phellodendron amurense, which is widely used in Korean traditional medicine, has been shown to possess antitumor, antimicrobial, and anti-inflammatory properties, among others. The present study investigated the effects of P. amurense hot-water extract (PAHWE) on angiogenesis, a key process in tumor growth, invasion, and metastasis. To investigate PAHWE’s anti-angiogenic properties, this study’s authors performed an analysis of angiogenesis and endothelial-cell proliferation, migration, invasion, and tube formation, as well as zymogram assays and the rat aortic ring-sprouting assay. PAHWE inhibited cell growth, mobility, and vessel formation in response to VEGF in vitro and ex vivo. Furthermore, it reduced VEGF-induced intracellular signaling events, such as the activation of matrix metalloproteinases (MMPs) -2 and -9. These results indicate that PAHWE’s anti-angiogenic properties might lead to the development of potential drugs for treating angiogenesis-associated diseases such as cancer.

• Journal of the Korean Geographical Society
• /
• v.28 no.2
• /
• pp.77-98
• /
• 1993

The intent of this study is to analyze the characteristics of distribution, patter, and deposits of the exposed debris slope landform by aerial photography interpretation, measure-ment on the topographical maps and field surveys in the southern part Taebaek mountains. It also aims to research the arrangement types of mountain slope and the landform development of debris slopes in this area. In conclusion, main observations can be summed up as follows. 1. The distribution characteristics 1)From the viewpoint of bedrocks, the distribution density of talus is high in case of the bedrock with high density of joints, sheeting structures and hard rocks, but that of the block stream is high in case of intrusive rocks with the talus line. 2)From the viewpoint of bedrocks, the distribution density of talus is high in case of the bedrock with high density of joints, sheeting structures and hard rocks, but that of the block stream is high in case of inrtusive rocks with the talus line. 2) From the viewpoint of distribution altitude, talus is mainly distributed in the 301~500 meters part above the sea level, while the block stream is distributed in the 101~300 meters part. 3) From the viewpoint of slope oriention, the distribution density of talus on the slope facing the south(S, SE, SW) is a little higher than that of talus on the slope facing the north(N, NE, NW). 2. The Pattern Characteristics 1) The tongue-shaped type among the four types is the most in number. 2) The average length of talus slope is 99 meters, especially that of talus composed of hornfels or granodiorite is longer. Foth the former is easy to make free face; the latter is easdy to produce round stones. The average length of block stream slope is 145 meters, the longest of all is one km(granodiorite). 3) The gradient of talus slope is 20~45${^\circ}$, most of them 26-30${^\croc}$; but talus composed of intrusive rocks is gentle. 4) The slope pattern of talus shows concave slope, which means readjustment of constituent debris. Some of the block stream slope patterns show concave slope at the upper slope and the lower slope, but convex slope at the middle slope; others have uneven slope. 3. The deposit characteristics 1) The average length of constituent debris is 48~172 centimeters in diameter, the sorting of debris is not bad without matrix. That of block stream is longer than that of talus; this difference of debris average diameter is funda-mentally caused by joint space of bedrocks. 2) The shape of constituent debris in talus is mainly angular, but that of the debris composed of intrusive rocks is sub-angular. The shape of constituent debris in block stream is mainly sub-roundl. 3) IN case dof talus, debris diameter is generally increasing with downward slope, but some of them are disordered and the debris diameter of the sides are larger than that of the middle part on a landform surface. In block stream, debris diameter variation is perpendicularly disordered, and the debris diameter of the middle part is generally larger than that of the sides on a landform surface. 4)The long axis orientation of debris is a not bad at the lower part of the slope in talus (only 2 of 6 talus). In block stream(2 of 3), one is good in sorting; another is not bad. The researcher thinks that the latter was caused by the collapse of constituent debris. 5) Most debris were weathered and some are secondly weathered in situ, but talus composed of fresh debris is developing. 4. The landform development of debris slopes and the arrangement types of the mountain slope 1) The formation and development period of talus is divided into two periods. The first period is formation period of talus9the last glacial period), the second period is adjustment period(postglacial age). And that of block stream is divided into three periods: the first period is production period of blocks(tertiary, interglacial period), the second formation period of block stream(the last glacial period), and the third adjustment period of block stream(postglacialage). 2) The arrangement types of mountain slope are divided into six types in this research area, which are as follows. Type I; high level convex slope-free face-talus-block stream-alluvial surface Type II: high level convex slope-free face-talus-alluvial surface Type III: free face-talus-block stream-all-uvial surface Type IV: free face-talus-alluval surface Type V: talus-alluval surface Type VI: block stream-alluvial surface Particularly, type IV id\s basic type of all; others are modified ones.