• Tribology and Lubricants
• /
• v.29 no.1
• /
• pp.46-50
• /
• 2013

In this study, the frictional behaviors of articular cartilage against a Co-Cr alloy in two types of kinematic motions were compared. Cartilage pins were punched from the femoral condyles of porcine knee joints, and Co-Cr alloy disks were machined from orthopedic-grade rods and polished to a surface roughness ($R_a$) of 0.002. Friction tests were conducted by using a pin-on-disk-type tribotester in phosphate buffered saline (PBS) under pressures of 0.5, 1, and 2 MPa. All tests were performed in the repeat pass rotational (ROT) and the linear reciprocal (RCP) sliding motions with the same sliding distance and speed of 50 mm/s. The coefficients of friction of the cartilage against the Co-Cr alloy increased with the sliding time in both kinematic motions for all contact pressures. The maximum coefficients of friction in RCP motion were 1.08, 2.82, and 1.96 times those in ROT motion for contact pressures of 0.5, 1, and 2 MPa, respectively. As the contact pressure increased, the coefficients of friction gradually increased in RCP motion, whereas they decrease and then increased in ROT motion. The interaction between the directional change of the shear stress and the orientation of collagen fiber in the superficial layer of the cartilage could affect the change in the frictional behaviors of the cartilage. A large difference in the coefficients of friction between the two kinematic motions could be interpreted as differences in the directional change of shear stress at the contact surface.

• PNF and Movement
• /
• v.15 no.3
• /
• pp.237-246
• /
• 2017

Purpose: The purpose of this study was to investigate the effects of forward-and-backward shift trunk exercise using a proprioceptive neuromuscular facilitation (PNF) diagonal pattern in a closed kinematic chain exercise on the upper limb function and activity of daily living (ADL) in a stroke patient. Methods: One subject participated in this study. The study used a reversal A-B-A' design, where A and A' were the baseline period (no intervention), and B was the intervention period. The intervention was a forward-and-backward trunk shift exercise, using a PNF diagonal pattern on both a stand-on-hand position and a quadruped position of closed kinematic chain exercises, for 20 min per day for 2 weeks. The range of motion (ROM) of the shoulder joint was measured and a Fugl-Meyer assessment of upper extremity (FMA-UE) and a functional independence measure (FIM) were performed to measure upper limb function and activity of daily living (ADL). Results: ROMs of shoulder joint (flexion, extension, abduction, and external rotation) increased in the intervention phase. The FMA-UE score increased (from 28 to 36) in the intervention phase. The FIM score increased (from 20 to 25) in the intervention phase. These increases were maintained after intervention (Baseline II). Conclusion: These results suggest that forward-and-backward shift trunk exercises using a PNF diagonal pattern in a closed kinematic chain exercise have a positive effect on stroke patients' upper limb function and ADL ability.

• The Journal of Korean Physical Therapy
• /
• v.22 no.2
• /
• pp.15-23
• /
• 2010

Purpose: This study was done to establish reference data for temporo-spatial, kinematic and kinetic parameters for normal Koreans as they age. Methods: Normal adults and children without a previous history of musculoskeletal problems were enrolled in this study. The normal subjects were divided by age into three groups: Group I: children ($11.95{\pm}0.29$ years); Group II: young adults ($23.90{\pm}3.67$ years); Group III: older adults ($71.40{\pm}4.08$ years). The temporo-spatial and kinematic data were measured using 6 MX3 cameras while each subject walked through a 10 m walkway at a self-selected speed. The kinetic data were measured using 2 force plates and were calculated by inverse dynamics. Results: Motion patterns are typically associated with a specific phase of the gait cycle. Our results were as follows: 1. There were significant differences between the different age groups in temporo-spatial parameters such as cadence, double support, time of foot off, stride length, step length, and walking speed. 2. There were significant differences between the groups in kinematic parameters such as range of motion (ROM) of the hip, knee and ankle in the sagittal plane, ROM of the pelvis, hip and knee in the coronal plane and ROM of the pelvis, hip and ankle in the transverse plane. 3. There were significant differences between the groups in kinetic parameters such as joint moments of force, joint mechanical power generation or absorption and ground reaction forces. Conclusion: The results of this study can be utilized (a) as a reference for kinematic and kinetic data of gait analysis in normal Koreans, and (b) as an aide in evaluating and treating patients who have problems relating to gait.

• Horticultural Science & Technology
• /
• v.34 no.6
• /
• pp.940-958
• /
• 2016

The objective of this study was to analyze the kinematic and kinetic characteristics of two horticultural activities: seed sowing and planting plant. Thirty-one male university students (aged $26.2{\pm}2.0years$) participated in this study. Kinematic factors (movement times, peak velocity, joint angles, and grasp patterns) were assessed using a three-dimensional motion analysis system while the subjects performed the horticultural activities. Kinetic factors (muscle activation of eight upper-limb muscles: the anterior deltoid, serratus anterior, upper trapezius, infraspinatus, latissimus dorsi, biceps brachii, brachioradialis, and flexor carpi radialis) were assessed using surface electromyography. The acts of seed sowing and planting plant were comprised of five tasks which included six types of phases: reaching, grasping, back transporting, forward transporting, watering, and releasing. The movement times, peak velocity, joint angles, and grasp patterns were significantly different across the tasks involved in the horticultural activities. All eight muscles of the upper limbs were utilized during the horticultural activities, and the muscle activation of the serratus anterior was the highest compared to that of the other muscles tested. The kinematic and kinetic characteristics of these horticultural activities showed similar characteristics to reaching and grasping rehabilitation training and daily living activities. The present study provides reference data for common horticultural activities using a kinematic and kinetic analysis.

• International Journal of Control, Automation, and Systems
• /
• v.3 no.3
• /
• pp.453-460
• /
• 2005

In this paper, a prototype Cartesian Parallel Manipulator (CPM) is demonstrated, in which a moving platform is connected to a fixed frame by three PRRR limbs. Due to the orthogonal arrangement of the three prismatic joints, it behaves like a conventional X-Y-Z Cartesian robot. However, because all the linear actuators are mounted at the fixed frame, the manipulator may be suitable for applications requiring high speed and accuracy. Using a geometric method and the practical assumption that three revolute joint axes in each limb are parallel to one another, a simple forward kinematics for an actual model is derived, which is expressed in terms of a set of linear equations. Based on the error model, two calibration methods using full position and length measurements are developed. It is shown that for a full position measurement, the solution for the calibration can be obtained analytically. However, since a ball-bar is less expensive and sufficiently accurate for calibration, the kinematic calibration experiment on the prototype machine is performed by using a ball-bar. The effectiveness of the kinematic calibration method with a ball-bar is verified through the well­known circular test.

• Journal of International Academy of Physical Therapy Research
• /
• v.7 no.1
• /
• pp.979-988
• /
• 2016

The purpose of this systematic review is to investigate the effects of tape application on improving body conditions. The search strategy for this review included a literature search by members of the International Kinematic Academy in 12 countries between January 2014 and February 2015 using PubMed, CINAHL, Cochrane, Google Scholar, websites and national journals. The search words included "Kinesiotape, Kinesio tape, kinesiotaping, elastic taping, taping, functional taping, myofascial taping, sensomotor taping". The review included all articles, even those published in different languages. These searches resulted in 821 publications. There are several effects of tape application were revealed such as improving blood circulation, lymphatic circulation, body range of motion, activation of mechanoreceptor and joint stability, and decreasing pain. No one negative about the positive effects of taping, however the more effort is required to find evidence of effects of tape application.

• 한국기계연구소 소보
• /
• s.19
• /
• pp.81-92
• /
• 1989

This paper presents a simple identification method of the actual kinematic parameters for the robot with parallel joints. It is known that Denavit-Hartenberg's coordinate system is not useful for nearly parallel joints. In this paper, the coordinate frames are reassigned to model the kinematic parameter between nearly parallel joints by four parameters. The proposed identification method uses a straight ruler about 1m long. A robot hand is placed by using a teaching pendant at the prescribed points on the ruler, and corresponding error function is defined. The identified kinematic parameters which make the error function zero are obtained by iterative least square error method based on the singular value decomposition. In the compensation of joint angles, only the position is considered because the usual applications of robot do not require a precise orientation control.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.299-303
• /
• 2004

In our pervious paper, a new parallel-type spherical 3-degree-of-freedom mechanism consisting of a two-degree-of-freedom parallel module and a serial RRR subchain was proposed[1]. In this paper, its improved version is suggested and implemented. Differently from the previous 3-dof spherical mechanism, gear chains are incorporated into the current version of the mechanism to drive the distal revolute joint of the serial subchain from the base of the mechanism and in fact, the modification significantly improves kinematic characteristics of the mechanism within its workspace. Firstly, after a brief description on its structure, the closed-form solutions of both the forward and the reverse position analysis are derived. Secondly, the first-order kinematic model of the mechanism for the inputs which are assumed to be located at the base is derived. Thirdly, through the simulations of the kinematic analysis via. kinematic isotropic index, it is confirmed that the mechanism has much more improved isotropic properties throughout the workspace of the mechanism than the previous mechanism in [1]. Lastly, the proposed mechanism is implemented to verify the results from this analysis.

• Journal of Mechanical Science and Technology
• /
• v.17 no.1
• /
• pp.23-31
• /
• 2003

This paper introduces a constraint operator for the kinematic calibration of a parallel mechanism. By adopting the concept of a constraint operator, the movement between two poses is constrained. When the constrained movements are satisfied, the active joint displacements are taken and inputted into the kinematic model to compute the theoretical movements. A cost function is derived by the errors between the theoretical movement and the actual movement. The parameters that minimize the cost function are estimated and substituted into the kinematic model for a kinematic calibration. A single constraint plane is employed as a mechanical fixture to constrain the movement, and three digital indicators are used as the sensing devices to determine whether the constrained movement is satisfied. This calibration system represents an effective, low cost and feasible technique for a parallel mechanism. A calibration algorithm is developed with a constraint operator and implemented on a parallel manipulator constructed for a machining center tool.

• Korean Journal of Applied Biomechanics
• /
• v.27 no.3
• /
• pp.165-169
• /
• 2017

Objective: The Star Excursion Balance Test (SEBT) and Y-Balance Test (YBT) have been commonly applied to measure dynamic postural stability ability. These two tests are utilized interchangeably in various settings. However, they could in fact require different movements to assess dynamic postural stability, as one uses a platform and different measuring techniques than the other. The purpose of this study was to determine if there was a significant difference in the kinematic patterns in physically active population while performing the SEBT and the YBT. Method: Seventy participants performed in the Anterior (AN), Posteromedial (PM), and Posterolateral (PL) directions of the SEBT and the YBT. The kinematics of hip, knee, and ankle in sagittal plane was calculated and analyzed. Paired-sample t-tests were performed to compare joint angular displacement in the ankle, knee, and hip between the SEBT and the YBT. Results: Significant differences in angular displacement at the hip, knee, and ankle joints in the sagittal plane between performance on the SEBT and on the YBT were observed. Conclusion: Clinicians and researchers should not apply these dynamic postural control tasks interchangeably from one task to another. There appear to be kinematic pattern differences between tests in healthy physical active population.