• The Korean Journal of Community Living Science
• /
• v.17 no.1
• /
• pp.123-139
• /
• 2006

The purpose of this study is to search how to promote health and improve nutrition and health care of the elderly people in rural area. Behaviors for health promotion and habits against health risk were surveyed. Dietary management was analyzed for surveyed nutrient intake by 24 hr -recall method. 242 subjects were collected in 12 cities or counties in Gyeonggi Province and 20 elderly people (10 male and 10 female) were selected out of 1 village in each district. Questionnaire for health behavior and dietary management was carried out by trained interviewers. Statistical analyses were made by SAS (version 8.1) and Chi-square tests and General Linear Models were used. Characteristics of the elderly people were 61-74 year-olds (68.2%), elementary school educated (78.4%), with spouse (51.7%), monthly living cost of 500-1,000 thousand won(43.4%), and monthly pocket money of 50-100 or 100-200 thousand won(33.5%, 26.5%). 41.4% of the subjects checked up medical examination regularly. The alcohol drinking status was significantly different according to gender: high no-drink rate of female (52.5%) and low no-drink rate of male (25.6%). Kinds of disease were different according to gender: higher proportion of cardiovascular disease(46.3%) and diabetes mellitus(8.1 %) in male and joint lumbago neuralgia(44.4%) and osteoporosis(8.6%) in female. Gastrointestinal complaints were nausea (69.0%) and chronic indigestion (17.8%). Constipation (12.0%) and vomiting (4.3%) were more frequent in female. Dietary management was good (3 meals per day: 93.4%., dining with family: 72.4%, regular mealtime: 72.4%, and 3-4 times of snacks per week: 44.9%) except side dish taking of 3-4 kinds only. However, almost one-third of the female elderly ate alone (30.6%) which was well compared with one-fifth of the male (19.7%). And food and nutrients intake were not significantly different according to gender except that male elderly's intake of energy and protein was lower than that of female's. The surveyed subjects had no difficulties in Activities of Daily Living (ADL), but some female elderly had some difficulties with Instrumental Activities of Daily Living (IADL) like working at home, using transport, and going shopping. These results suggest that low quality of life linked with low economic status of the rural elderly and that congregate meal at village hall would be required for the female elderly eating alone. For the undernourished male elderly, it would be needed to provide snacks and to establish nutrition and health surveillance system.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.31 no.3
• /
• pp.23-30
• /
• 2003

In this study, the various load cases by specified by the IEC61400-1 international specification and GL Regulations for the wind energy conversion system were considered, and a specific composite structure configuration which can effectively endure various loads was proposed. In order to evaluate the structure, the structural analysis for the composite wind turbine blade was performed using the finite element method(FEM). In the structural design, the acceptable configuration of blade structure was determined through the parametric studies, and the most dominant design parameters were confirmed. In the stress analysis using the FEM, it was confirmed that the blade structure was safe and stable for all the considerd load cases. Moreover the safety of the blade root joint with insert bolts, newly devised in this study, was checked against the design loads and also the fatigue loads. The fatigue life for operating more than 20 years was estimated by using the well-known S-N linear damage rule, the load spectrum and Spera's empirical equations. The full-scale static test was performed under the simulated aerodynamic loads. from the experimental results, it was found that the designed blade had the structural integrity. Furthermore the measured results were agreed with the analytical results such as deflections, strains, the mass and the radial center of gravity. The studied blade was successfully certified by an international institute, GL, of Germany.

• International Journal of Highway Engineering
• /
• v.8 no.3 s.29
• /
• pp.105-114
• /
• 2006

A popular alternative to extend the life of aged pavement is asphalt overlay. However, it has a very serious and inherent shortcoming in deterring a reflection crack. Although joint-rehabilitation and stress-relief techniques have been applied to deter such reflection cracks in aged pavement, the techniques had a limited success only in slowing down the progress of a reflection crack. Rubblization technique rubblizes the concrete pavement slab in situ and uses the rubblized slab as the base material. Then, pavement overlay is applied to finish off the rehabilitation of aged pavement. This rubblization technique has the advantage of solving the problem of reflection cracking completely. When rubblization technique is applied, the upper layer of aged concrete pavement is rubblized between 40mm-70mm in depth. However, the lower layer is typically rubblized more than 100mm in depth. Nevertheless, it is difficult to turn the entire concrete pavement of more than 30cm in depth into rubblized aggregate of appropriate size. Thus, a simulation experiment was carried out to find the appropriate rubblized depth, which avoids the reflection cracking and still maintains the function of subbase, by varying the depth of rubblized depth in loom increments of 0cm, 10cm, and 20cm. The result indicated the optimum rubblized depth was 10cm (Lee, 2006). Additionally, a small rubblizinge equipment was developed in order to derive the rubblization technique appropriate for thick concrete pavement. This equipment was tested out on an experimental pavement, which was constructed with the same standard and specification for the road in actual use, by varying its rubblizing head shape and energy as well as the effective area of rubblization. This experiment led to a prototype equipment for rubblization of thick concrete pavement. The prototype was put into use on a highway, undergoing a test construction and monitoring afterwards. This entire process was necessary for the validation of the proposed rubblization technique.

• The Journal of Internal Korean Medicine
• /
• v.15 no.2
• /
• pp.318-346
• /
• 1994

A Bibliographical study was done about lumbago in oriental internal Medicine. The results are as follows. 1. Shenxu,sexual active, senile, Feng, Han, Shi, shiji, Tanyin and Qi lumbago are applicable to internal medical lumbago in oriental medicine, and Shenxu is essential pathogenesis. 2. Shenxu lumbago is characterized by continous pain, improved after chiropsia, deep pulse in Chi pulse, and used QingeWan, LiuweiDihuangWan and AnshenWan in herb-medicine. and Cortex Eucommiae, Radix Rehmanniae Praeparata and Fructus Psoraleae in drugs for the purpose of ZishenYijing, and related to lumbago caused by chronic prostatitis, calculus or tumor in kidney and diabetes mellitus. 3. Sexual active lumbago is dim-aching and weak pain in or after sexual life at low back and knee joint, and classified to Shenyang Buzu, ShenjingKuisun. GanshenYinxu and XinshenBujiao ; Liuwei Dihuang Wan, ZuoguiWan In herb-medicine. Cornu Cervi Pantotrichum, Fructus Lycii and Fructus Corni in drug were used for treatment. 4. Senile Lumbago is a kind of consumptive disease due to exhaused essential energy and caused by lack of Shenjing, Yangqi ; and described as repeated mild dim pain and ErzhiWan, QingeWan and MoyaoGao were used frequently, supposed to connected with osteoporosis, osteomalacia and osteoarthropathy deformons caused by aging. 5. Feng lumbago is attacked by Liuyin, and characterized by chilling and fever. stabbing pain from thoracic and lumbar vertebrae to pedes, and used WujiXan, XiaoxumingTang for treatment. Han lumbago is caused by cold's attacking Shenjing, distinguished for chilling,icing sense improved by heat on low back, and used WujiXan, JiangfuTang. Shi lumbago is caused by damp's inflowing Shenjing, described as stone-like lumbago which was subsided low back pain growing worse by gloomy rain, and used ShenshiTang. ShenzhuTang for the purpose of ZaoshiXingqi. And it is supposed that lumbago occured in the initial of urinary track infection was belong to those of Feng,Han and Sill's. 6. Sillji lumbago is caused by pathogen being in the spleen and the stomach, and used ChenxiangJiangqiTang, PingweiSan for treatment. And it is supposed that it belong to lumbago caused by gastrointerstinal disease such as peptic ulcer. gastroduodenal tumor and colonic inflammatory disease. 7. Tanyin lumbago is caused by Tanyin's flowing meridian, characterized by thoracolumbar verterber's heaviness, covered sense with something on low back and painless massage. Kuaiqi-drug are added to ErchenTang, DaotanTang for treatment, and it supposed that Tanyin lumbago's belong to that accompanied with metabolic disease such as obesity and gout. 8. Qi lumbago is caused by excessive stress such as melancholy and fury, described as multiple stabbing pain, an unexpected on and improvement, ranging back pain until flank and abdomine. Tiaoqi-drugs were added to RenshenShunqiSan, WuyaoShunqiSan for treatment, and it supposed to connecting with emotional lumbago such as hysteria, feigned illness and anxiety psychosis.

• Korean Journal of Materials Research
• /
• v.9 no.10
• /
• pp.1018-1024
• /
• 1999

The effects of operating temperature and stress on degradation of components in high temperature steam generator were investigated. Several 2.25CrlMo tubes which had operated over 20 years and an unused 9CrlMoVNb tube were tested. For the former samples, the amount of $\textrm{M}_{6}\textrm{C}$ carbide and its size are increased with the aging or operating time. The precipitation behavior of carbides ($\textrm{M}_{2}\textrm{O}$, $\textrm{M}_{6}\textrm{C}$) is changed with the operating temperature of the tubes. However, unused 9CrlMoVNb samples show a different carbide precipitation process due to high chromium, vanadium, and niobium contents. The amount of Cr-rich $\textrm{M}_{23}\textrm{C}_{6}$ carbide is significantly increased with aging time, but that of $\textrm{M}_{6}\textrm{C}$ type carbide is rarely changed with aging time at elevated temperatures.

• Journal of Yeungnam Medical Science
• /
• v.18 no.2
• /
• pp.187-198
• /
• 2001

Background: The purpose of this study was to evaluate the relationship between variable factors and clinical results following the operative treatment of the tibial plateau fractures. Materials and Methods: The clinical and radiological analysis was performed on 29 cases of the tibial plateau fractures who had been treated with operative treatment and followed up for more than 1 year from January 1991 to December 1997. The analysis of clinical results was performed dividing into age, cause of injury, fracture type of Schatzker classification, associated soft tissue injury and method of operative treatment. Results: According to Schatzker classification, 2 cases(6.9%) were type I, 11 cases(37.9%) were type II, 1 case(3.5%) was type III, 5 cases(17.2%) were type IV, 4 cases(13.8%) were type V, and 6 cases(20.7%) were type VI. In all cases, bony unions were obtained. According to Blokker evaluation, 23 cases(79.3%) of 29 cases were acceptable. Conclusion: We could expect good clinical results if early knee joint mobilization following minimal invasive open reduction and internal fixation could be obtained. Bad clinical results were related with young age group under 30, more than Schatzker classification type IV of high energy trauma and associated injury of anterior cruciated ligment or meniscus.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.28 no.5
• /
• pp.511-521
• /
• 2015

The thermal bridge occurring in a building influences its thermal performance and durability. The domestic typical multi-unit residential buildings suffer thermal losses resulting from thermal bridges of the balcony slab. To minimize the thermal loss between inside and outside of the balcony slab, thermal bridge breaker(TBB) systems have been developed and applied in building construction. Although thermal bridge breaker systems for reinforced concrete(RC) wall-slab joints can improve the thermal performance of a building, it is necessary to verify the structural performance of TBB systems whether they provide proper resistance for cyclic loading. In order to investigate the structural characteristics of TBB systems embedded in RC slabs, cyclic tests of wall-slab joints were performed by applying two reversed cycles at each up to 30 cycles. The test results show that the RC slabs embedding TBBS systems can present excellent structural performance and the maximum moment capacity, energy dissipation capacity and ductility of TBBs systems are enhanced compared to those of the typical RC slabs.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.17 no.3
• /
• pp.257-264
• /
• 2011

On April 20, 2010, semi-submersible offshore drilling unit Deepwater Horizon was exploded and sank, and 4.9 million barrels(about 778 thousand tons) of crude oil was spilled into the Gulf of Mexico. As more than one year has been passed since the incident, a lot of investigation reports and lessons learned have been made public and also a lot more will be released soon. This paper studies the final report of the National Commission on "the BP Deepwater Horizon Oil Spill and Offshore Drilling", which was organized by the executive directive of U.S. President Barack Obama, and the interim report of Joint Investigation team of U.S. Coast Guard and BOEMRE of "Report of Investigation into the Circumstances Surrounding the Explosion, Fire, Sinking and Loss of Eleven Members Aboard the Mobile Offshore Drilling Unit Deepwater Horizon". The review is focused on the response to the oil spill. And the paper suggests how to improve national marine pollution response policy. In the paper, the Korean governments is suggested to reinforce the capability for instructing and supervising the responsible party's source control measures, to review how to introduce in-situ burning and vessel of opportunity program into our country, and to continue monitoring on the progress of developments of R&D projects related to oil spill response in the U.S..

• International Area Studies Review
• /
• v.21 no.1
• /
• pp.163-179
• /
• 2017

Iran has been focused on FDI by global automobile companies after the economic sanction on Iran was removed except primary sanction. In this paper, some strategies for Korean Automobile Industry to branch out into Iran are suggested. For the purpose, Iran's automobile industry and characteristics are examined. The market situation is analyzed qualitatively and quantitatively. In passenger cars sector, Korean automobile companies would be better to wait and see the development of US-Iran relationships while exporting CKD sets of cars to Iran. It can be a good strategy, however, to put parts companies into Iran first because of Iran Government could be displeasing with exporting CKD only. FDI, licensing, and joint venture are all available for the parts companies. Motor companies can clear the regulation of auto-parts localization proportion by the method. The parts companies will be able to do key roles as supply chains after OEM branch out into Iran. It is also advisable to upgrade outpost in Iran into frontline for exporting cars to MENA area. In such a case it will be a prerequisite to develop a role-division model with facilities in East Europe. It could be called Parts first-then cars strategy. In commercial cars sector, it can be suggested to leverage natural gas as a link to branch out into Iran. Iran government wishes to develop natural gas resources. The strategy can be summarized that automobile companies carry out producing CNG buses in Iran while energy companies are drilling and producing natural gas.

• Conservation Science in Museum
• /
• v.26
• /
• pp.67-82
• /
• 2021

Two golden beads (Buyeo 5336) housed at the Buyeo National Museum were discovered in 1993 near the site of an ancient workshop in Neungsan-ri in Buyeo-gun, Chungcheongnam-do Province. These rare examples from the Baekje Kingdom of an application of granulation have maintained their original form intact, and thus serve as important materials for the investigation of production techniques applied. This study analyzed the composition of the golden beads using a portable X-ray fluorescence analyzer, a stereo microscope, and a scanning electron microscope with an energy dispersive X-ray spectrometer. The manufacturing technique was examined through the observation of the micro-shape and the surface condition and by a composition analysis of the joint part. In both beads, a hole was pierced in a hollow body and the bead was decorated with golden wires around the hole and gold granules in other parts. In some areas, golden granules had been attached to the gold plate and golden wires were then placed over the granules. The purity of both the wires and the granules was analyzed as 23.6 - 23.7K. A high copper content was detected in some of the parts where the granules were attached. The findings of a previous reproduction experiment and study of production methods suggest that the beads were made using the copper diffusion technique.