• The Journal of Korean Academy of Orthopedic Manual Physical Therapy
• /
• v.14 no.1
• /
• pp.61-65
• /
• 2008

Purpose : The purpose of the study was to determine Effects of application on manual therapy of knee pain cause of Sacroiliac joint dysfunction. Methods : The patient with knee pain was 59years female. Muscle Energy Techniques, high-velocity, low-amplitude and modality(Hot pack, ultrasound, TENS) using during one month. Results : The patient has improve pain, muscle strength and function.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2000.10b
• /
• pp.851-856
• /
• 2000

When subjected to the strong earthquake ground motion, upper-wall lower-frame structures have high possibility of the weak-story failure in the lower frame part. Sufficient strength, energy dissipation capacity and ductility should be provided at the joint between the deep beam and the lower column. In this study, a typical structure was selected for a prototype and four 1:2.5 scaled models, representing the subassemblage including the exterior column and the deep beam, were constructed. The transverse reinforcement was designed according to ACI procedure¹ and the procedure proposed by Sheikh². The inelastic behavior of the subassemblages subjected to the cyclic lateral displacement were evaluated through investigation of the ultimate strength, ductility, load-deformation characteristics. From the test of 4 specimens, it is concluded that the specimens designed according to Sheikh's procedure revealed higher ductility than that by ACI procedure.

• Journal of muscle and joint health
• /
• v.18 no.1
• /
• pp.5-15
• /
• 2011

Purpose: Osteoporosis is often considered as a women's disease, but men's osteoporosis is also increasingly recognized as an important public health problem. This study was carried out to identify the important modifiable risk factors for osteoporosis in men. Methods: Two hundred and fourteen men were selected among those who checked bone mineral density by dual energy x-ray absorptiometry in lumbar vertebrae from June to September, 2009 at 3 general hospitals in Busan. Self-administrated questionnaires and BMD results of lumbar vertebrae were used for data. Collected data were analyzed by using SPSS 14.0 program. Results: The sports activity level in 30's, body weight, and fracture history of mother were the most powerful influencing factors on the bone mineral density of lumbar vertebrae. Conclusion: These results highlight the need to participate vigorously in sports activity during 30s as a means of increasing peak bone mass in lumbar vertebrae in order to prevent osteoporosis and fracture in men.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2004.11a
• /
• pp.619-622
• /
• 2004

In this study, a moment resisting precast concrete beam-column connection is proposed. An experimental study was carried out to investigate the connection behavior subjected to cyclic loading. Three precast beam-column interior connections and one monolithic connection were tested. Variable included the detailing used at the joint to achieve structural constructability and the location of mild steel reinforcement and high strength bar. During specimen fabrication, the joint details enables ease and speed of construction. Connection performance is evaluated on the basis of ductility, energy dissipation capacity, connection strength, and drift capacity. Based on test results, the precast concrete beam-column connection is capable of matching or exceeding the performance of the monolithic connection.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.15 no.4
• /
• pp.295-300
• /
• 1990

Inverse kinematic problem is a crucial point for robot manipulator control. In this paper, to implement the Jacobian control technique we used the Hopfield, Tank's neural network. The states of neurons represent joint velocities, and the connection weights are determined from the current value of the Jacobian matirx. The network energy function is constructed so that its minimum corresponds to the minimum least square error. At each sampling time, connection weights and neuron states are updated according to current joint positon. Inverse kinematic solution to the planar redundant manipulator is solved by computer simulation.

• Advances in concrete construction
• /
• v.8 no.2
• /
• pp.91-100
• /
• 2019

In this paper three damaged exterior RC beam-column joints made of recycled aggregate concrete (RAC) were repaired. The aim of the study was to restore back the lost capacity of the beam-column joint to the original state or more. A relatively cheap material locally available galvanized steel welded wire mesh (GSWWM) of grid size 25 mm was used to confine the damaged region and then jacketed with cement mortar. Repaired specimens were also subjected to similar cyclic displacement as those of unrepaired specimens. Seismic parameters such as load carrying capacity, ductility, energy dissipation, stiffness degradation etc. were analyzed. Results show that repaired specimens exhibited better seismic performance and hence the adopted repairing strategies could be considered as satisfactory. These findings would be helpful to the field engineers to adopt a suitable rapid and cost efficient repairing technique for restoring the damaged frame structural joints for post earthquake usage.

• Nuclear Engineering and Technology
• /
• v.54 no.7
• /
• pp.2510-2518
• /
• 2022

The main purpose of collecting and analyzing operating experience events is to look for insights to improve safety. The underlying assumption is the correlation and causality between events with different safety significances. The analysis of this assumption could be valuable to optimize operating experience feedback programs and to enhance safety. This paper analyses the correlation between events with different safety significances. Groups of events from six nuclear energy related databases are considered. The findings are that a correlation exists but with various levels and not as large or consistent as might be expected across different databases. These results might be the basis for further work to analysis causality, to find out how a similarity in causes influences the correlation, and finally to improve the operating experience program.

• Nuclear Engineering and Technology
• /
• v.54 no.8
• /
• pp.2877-2882
• /
• 2022

The paper presents the main results of computational and experimental optimization of the automatic power control system (AC) of the IBR-2M pulsed reactor in the presence of a high level of oscillatory instability. Optimization of the parameters of the AC made it possible to significantly reduce the influence of random and deterministic oscillations of reactivity on the noise of the pulse energy, as well as to sharply reduce the manifestation of the oscillatory instability of the reactor. As a result, the safety and reliability of operation of the reactor has increased substantially.

• International Journal of Automotive Technology
• /
• v.5 no.4
• /
• pp.303-309
• /
• 2004

In this paper, an interfacial crack length has been detected by using the ultrasonic attenuation coefficient on the adhesively bonded double-cantilever beam (DCB) joints. The correlations between energy release rates which were investigated by experimental measurement, the boundary element method (BEM) and Ripling's equation are compared with each other. The experimental results show that the interfacial crack length for the ultrasonic attenuation coefficient and energy release rate increases proportionally. From the experimental results, we propose a method to detect the interfacial crack length by using the ultrasonic attenuation coefficient and discuss it.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1998.03a
• /
• pp.220-226
• /
• 1998

In this pater, a method of strength evaluation applying fracture mechanics in adhesively bonded joints of A1/A1 materials was investigated. Various adhesively bonded joints of double-cantilever beam with a interfacial crack in its adhesive layer were prepared for the fracture toughness test of comprehensive mixed mode conditions from nearly pure mode I to mode II. The experiment of fracture toughness was carried out under various mixed mode conditions with an interfacial crack and critical energy release rate, Gc by the experimental measurements of compliances was determined. From the results, fracture toughness on mixed mode with an interfacial crack is well characterized by strain energy release rate and a method of strength evaluation by the fracture toughness in adhesively bonded joints of A1/A1 materials was discussed.