• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2006년도 춘계학술대회 논문집
• /
• pp.399-402
• /
• 2006

The outer race of CV(constant velocity) joint is an important load-supporting automotive part, which transmits torque between the transmission gear box and driving wheel. The outer race is difficult to forge because its shape is very complicated and the required dimensional tolerances are very small. Traditional warm and cold forging methods have their own limitations to produce such a complex shaped part; warm forging requires complex system with relatively higher manufacturing cost, while cold forging is not applicable to materials with limited formability. Therefore, multistage forging may be advantageous to produce complex shaped parts. In order to build a multistage forging system, it is necessary to characterize mechanical properties in response to system design parameters such as temperature, forging speed and reduction. For the analysis of formability of multistage forging process, finite element method(FEM) has been used for the process analysis. As a model case, a constant velocity (CV) joint forging process is analyzed by FEM, since CV joint has a complex shape and also its required dimensional tolerances are very tight. The data acquired by FEM is compared with operational forging data obtained from an industrial production line. Based on this comparative analysis, multistage forging process for CV joints is proposed.

• 대한가정학회지
• /
• 제24권3호
• /
• pp.43-50
• /
• 1986

This study is toidentify what makes people uncomfortable when people wear new shoes and to gain fundamental data for establishing shoe sizes. Data materal from the 16 measurement investigation conducted on 796 college girl students shows the following. 1) More than 96% of the subjects have experienced footache when they wore new shoes. It is significant that 45.76% of the subjects answered shoe width, especially pump-lining part cause them to feel more pain in their feet than any other measurement elements. 2) According to multiple correlation analysis to know which parts of feet determine shoe size, both multiple correlation coefficient of feet length to other parts of foot and joint girth to other parts of foot show the highest of R=0.93. 3) According to the ANOVA-tested result of estimated function when both foot-length-joint girth and foot length-joint girth-foot width are independent variables in each case, the level of α〈0.001 is very significant. 4) The comparision between KS G3116 adult women's shoe size establishment table and my table in this study reveals that the cases of more increased joint girth measurements than standard joint girth measurements in KS G 3116 table are easy to find.

• 대한의용생체공학회:의공학회지
• /
• 제32권2호
• /
• pp.93-104
• /
• 2011

The purpose of this study was to investigate lower-limb joint torque of the two groups as it changed by somatosensory stimulation during the descent down three stairs of different heights and to describe the difference between the two groups, which are young people group and elderly people group. Subjects of each groups climbed down a stair at four stimulation conditions, which are non-stimulation, tibialis anterior tendon stimulation, achilles tendon stimulation, tibialis anterior - achilles tendon stimulation. Motion capture data were collected using 3D optoelectric motion tracking system that utilizes active infrared LEDs, near infrared sensor and force plate. The obtained motion capture data was used to build 3D computer simulation model. The results show that lower-limb joint torque of the two groups changed with somatosensory stimulation as they descended the stairs and the joint torque of the two groups differed from each other.

• Journal of the Korean Data and Information Science Society
• /
• 제27권3호
• /
• pp.689-700
• /
• 2016

본 논문에서는 이변량 경시적 자료의 조건부 결합 분포를 추정하기 위하여 회귀 모형과 코플라 모형을 연구하였다. 주변 분포의 추정을 위하여 시변 전환 모형을 고려하였고, 이변량 반응변수 각각에 대한 주변 분포를 경험 분포를 이용한 비모수적 코플라를 이용하여 결합하여 조건부 결합 분포를 추정하였다. 주변 분포 모형의 모수 추정치는 추정방정식의 해로 얻어낼 수 있으며 우리가 제안한 모형은 조건부 평균 모형만으로 자료를 설명하기 어려운 경우에 적용될 수 있다. 시변 전환 모형과 비모수적 코플라 모형을 결합한 본 논문의 방법은 반복 측정된 이변량 경시적 자료에 대한 모형화가 모형에 대한 가정에서 비교적 자유로운 장점이 있다. 우리는 본 논문의 방법을 반복 측정된 이변량 콜레스테롤 자료를 분석하는데 적용하여 보았다.

• 한국산학기술학회논문지
• /
• 제10권11호
• /
• pp.3066-3073
• /
• 2009

3축 파이프 형상절단기에서 다양한 접합형상에 대하여 모관과 지관의 접합궤적을 수학적으로 유도하였다. 그 접합궤적에 절단폭 등의 공구 보정하여 실제로 가공할 절단궤적을 결정하여 이 공구궤적에 해당하는 CL-data를 생성하고, 또한 공구 궤적을 확인하기 위하여 ghost 기능을 구현하였다. 생성된 CL data를 PLC의 위치결정제어 모듈에 로딩하여 동시 3축($\alpha$, X, $\beta$축)의 이송을 제어하여 경로를 따라서 형상절단과 동시에 개선을 할 수 있도록 동시3축 파이프 형상절단 시스템을 개발하였다.

• 기본간호학회지
• /
• 제10권2호
• /
• pp.244-253
• /
• 2003

Purpose: This study was done for the purpose of testing the effects of hand moxibustion on pain in the knee joint, range of motion of the knee, and discomfort during ADL in elderly persons with knee joint pain. Method: Nonequivalent control group pre-post test research design was used. The participants were 35 elders who had knee joint pain. Sixteen were assigned to the experimental group and 19 to the control group. The instruments used for this study were the CRS (Graphic rating scale) for knee joint pain, goniometer for knee joint ROM, and modified ADL questionnaire developed by Lee. Analysis of data was done by percents, means and standard deviation, $x^2$-test, t-test, and ANCOVA using SPSS WIN 10.0. Result: The pain score for the right knee joint after hand moxibustion was significantly different between the experimental group and the control group after hand moxibustion (p=.035). The pain score for the left knee joint was not significantly different between the experimental group and the control group after hand moxibustion (p=.075). Right and left knee ROM scores were significantly different between the experimental group and the control group after hand moxibustion (Right p=.000, Left p=.034). Discomfort of ADL score was not significantly different between the experimental group and the control group after hand moxibustion (p=.053). Conclusion: In summary, knee joint pain in elders after hand moxibustion decreased and knee ROM in elders after hand moxibustion increased. So it would be useful for nurses to provide hand moxibustion as an alternative therapy to elders with knee joint pain in the community and thus reduce joint pain and increase knee ROM.

• Journal of Oral Medicine and Pain
• /
• 제18권2호
• /
• pp.43-53
• /
• 1993

The aim of this study was to investigate the relationship between the presence or absence of anterior tooth contact and the changes in temporomandibular joint space. The study sample consisted of 32symptom-free dental students and 79 craniomandibular disorders patients with unilateral joint dysfunction. The two groups were categorized into control group or experimental group, respectively. Recordings of the number and distribution of occlusal contacts were made by T-Scan system. Transcranial radiographs were taken with using of accurad-100 head positioner. Measured items in transcranial radiographs were anterior, superior, posterior joint space and relative condylar position to deepest position of glenoid folla. According to the presence or absence of anterior tooth contact, each group was subdivided and compared with each other with respect to TM joint space. Data were processed and tested with SPSS/PC + package. The results of the study showed that the joint space in control group were wider than those of experimental group and the difference of the width of joint space was more remarkable in subjects with anterior contact between control group and experimental group. However, in same group whether the presence of anterior tooth contact could hardly affect the difference of the width of joint space. And anterior tooth contact in grouip are more frequent than in experimental group.

• 대한치과보철학회지
• /
• 제31권1호
• /
• pp.39-50
• /
• 1993

The purpose of this study was to investigate the association between characteristics of temporomandibular joint sound and possible contributing factors of temporomandibular joint sound. 1487 high school students (798 men and 689 women) aged from 16 to 18 were asked by questionnaires which was made for this study by T.M.J. clinic, dental infirmary, School of Dentistry, Chosun University, and data obtained from questionnaires were analyzed by chi-square test. The following results were obtained: 1. The prevalence of temporomandibular joint sound were found in 35.7% of all the subjects. 2. Temporomandibular joint sound could be unchanged, reduced and increased frequencey over time dependent on the individual. 3. The intensity of temporomandibular joint sound could be unchanged and increased during the chewing of hard food dependent on the individual. 4. The unilateral chewing and bruxism were not considered as possible contributing factors upon the occurring of temporomandibular joint sound. 5. Statistical significant association was found between clenching, stiffness, stress and tempore-mandibular joint sound, respectiely.(P<0.001, P<.01, P<0.05).

• 대한인간공학회지
• /
• 제21권2호
• /
• pp.35-46
• /
• 2002

This study was performed to determine the voluntary range of joint mobility for middle-aged Korean adults. One hundred and eighty-eight subjects(99 males and 89 females) at the age range of 40 to 60 participated for this study. Thirty body movements at various joints were conducted to measure the range of joint mobility. Subjects were grouped by Rohrer's into four based on 25th percentile. The data were analyzed to see the differences of range of joint mobility between sexes and Rohrer's index groups. The results of this study and previous studies were compared to see the differences of range of joint mobility due to the aging. Results of this study indicate that females are generally more flexible than males. Significant differences were found to exist in fourteen movement between sexes and in ten movements, females have larger range of joint mobility than males. There were no significant differences in range of joint mobility may have a tendency to decrease with ages. The results of this study provide important information in dynamic dimensions for middle-aged Korean and can be used to design the various and work places for the middle-aged.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.854-861
• /
• 2005

Studied accuracy and practical use possibility of joint measurement that using 3D laser scanner to rock slope. Measured joint of Rock slope and comparison applied 3 dimension laser scanner and clinometer. 3D laser scanning system preserves on computer calculating to 3 dimension coordinate scaning laser to object. and according to laser measurement method of interior, produce correct vector value from charge-coupled device(CCD) or laser reciver and telegram register and time measuring equipment. Create of object x, y, z point coordinates to 3 dimension space of computer. Such 3 dimension point datum (Point Clouds) forms relocate position informations that exist to practical space to computer space. Practical numerical values related between each other. Compared joint distribution and direction that measured by laser scanner and clinometer. By the result, Distribution of joint projected almost equally. Could get more joint datas by measurement of 3 dimension scanner than measured by clinometer. Therefore, There is effect that objectification of rock slope investigation data, shortening of investigation periods, investigation reduction of cost. could know that it is very effective method in joint measuring.