• Annals of Clinical Neurophysiology
• /
• v.6 no.1
• /
• pp.31-34
• /
• 2004

Backgrounds: The pathway of the sural nerve (SN) is variable, but usually divided into medial and lateral sural branches joining the posterior tibial nerve (PTN) and the peroneal nerve (PN). The sural nerve may be affected by PN palsy. The frequency or the severity of SN involvement in peroneal palsy is not known. The purpose of the study is to investigate the frequency and the severity of the SN involvement by the peroneal nerve palsy. Methods: Total 85 patients were included with peroneal palsy. Amplitudes of distal peroneal, sural, and superficial peroneal nerves (SPN) were compared between normal and paralyzed sides. The frequency and severity of SN involvement by peroneal palsy were investigated. Results: Mean age was $48.4{\pm}17.4$ years old at the time of the test. Peroneal palsy was right side in 32, left in 38, and bilateral in 15 patients. Mean amplitudes of affected distal PN, SPN, and SN were $1.51{\pm}1.64mV$, $3.50{\pm}4.86{\mu}V$, and $10.42{\pm}6.59{\mu}V$ in right side, and $1.19{\pm}1.57mV$, $4.38{\pm}5.67{\mu}V$, and $11.06{\pm}6.87{\mu}V$ in left side, respectively. Sensory nerve action potential (SNAP) amplitude of the SN in the affected side was average $73.7{\pm}33.1%$ of normal, which was significantly lower than that in the normal side(p<0.01). The decrease of the sural SNAP amplitude was more than 15% in 39 out of 70 patients with unilateral peroneal palsy. Peroneal compound muscle action potential (CMAP) amplitude was not correlated with the amplitude of the sural SNAP. By complete peroneal palsy, SN SNAP amplitude was decreased to 4% of SNAP and $57.7{\pm}31.8%$ of that in normal side. Conclusions: PN injury without PTN involvement may induce reduction of sural SNAP amplitude. Because of the anatomic variation of SN, the electrophysiological findings are variable. It should be considered to interpret the location of the PN lesion.

• Informatization Policy
• /
• v.18 no.1
• /
• pp.45-54
• /
• 2011

The purpose of this study is to analyze the selection behavior decision model of telecommunications service under the telecommunication environments with joining the WiBro and 3GPP LTE-Advanced service at the sam time. The research results are as follows. First, mobile telecommunication service selection behavior is correlated with each other between WiBro and 3GPP LTE-Advanced service. Second, in the bivariate probit model estimates such as age, income, expenditure and income variable are important decision variables of WiBro and 3GPP LTE-Advanced service selection behavior. Gender and service using years, however, are not an important variables. The single and bivariate probit estimate results show the same estimation results. Finally, the two service selecting predictions by using the bivariate probit estimated results, 28.6% of WiBro and 25.3% of 3GPP LTE-Advanced were expected. Also, chance to join the two telecommunications services simultaneously is 19.3%. Therefore, WiBro selection probability is a little higher than 3GPP LTE-Advanced. The implications of these results, the future telecommunications service selection will be determined by economic factors such as income and expenditure. Thus, to enable the WiBro, policy means for reducing the excessive telecommunications expenditure are needed in the future.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.17 no.6
• /
• pp.549-556
• /
• 1984

Forty-eight fish species belonging to 38 genera and 10 families were collected along the Dongjin River from July 1982 to May 1984. The dominant species of them were Rhinogobius brunneus and Zacco platypus in the main stream and Abbottina springeri, Hemiculter eigenmanni and Moroco oxycephalus in the tributaries respectively. It was remarkable point in the distributional study of freshwater-fishes of Korea that both species of Pelteobagrus nitidus and Lefua costata were observed in the present studied areas for the first time. It was found that 6 species of Hypomesus olidus, Hemiculter eigenmanni, Pseudobagrus sp., Liobagrus mediadiposalis, Cobitis taenia striata, and Lepomis macrochirus inhabiting the seomjin River were unstably incorporated into the fish communities at the upper reaches of the Dongjin River which the Seomjin River flow down for the water power generation. It is suggested that the integradation between two subspecies of C. taenia occurs at the intermediate water areas in the mainstream of the Dongjin River, whereas C. t. striate is remained only at the upper reaches and C. t. lutheri is lived in the lower parts of the river. Population of C. koreensis found in the mainstream was exhibited considerable differences in the color patterns on the body sides of them in comparison with other populations, which was discussed in relation to the habitat variations adapted to the confluent condition of joining the Seomjin stream with the Dongjin River.

• Proceedings of the KWS Conference
• /
• 2002.10a
• /
• pp.612-619
• /
• 2002

The dynamic behavior of Al-Mg alloys plasma was very unstable and this instability was closely related to the unstable motion of keyhole during laser irradiation. The keyhole fluctuated both in size and shape and its fluctuation period was about 440 ${\mu}{\textrm}{m}$. This instability has been estimated to be caused by the evaporation phenomena of metals with different boiling point and latent heats of vaporization. Therefore, the authors have conducted the spectroscopic diagnostics of plasma induced in the pulsed YAG laser welding of Al-Mg alloys in air and argon atmospheres. In the air environment, the identified spectra were atomic lines of Al, Mg, Cr, Mn, Cu, Fe and Zn, and singly ionized Mg line, as well as strong molecular spectrum of AlO, MgO and AIH. It was confirmed that the resonant lines of Al and Mg were strongly self-absorbed, in particular in the vicinity of pool surface. The self-absorption of atomic Mg line was more eminent in alloys containing higher Mg. These facts showed that the laser-induced plasma was relatively a low temperature and high density metallic vapor. The intensities of molecular spectra of AlO and MgO were different each other depending on the power density of laser beam. Under the low power density irradiation condition, the MgO band spectra were predominant in intensity, while the AlO spectra became much stronger in higher power density. In argon atmosphere the band spectra of MgO and AlO completely vanished, but AlH molecular spectra was detected clearly. The hydrogen source was presumably the hydrogen solved in the base Metal, absorbed water on the surface oxide layer or H$_2$ and $H_2O$ in the shielding gas. The temporal change in spectral line intensities was quite similar to the fluctuation of keyhole. The time average plasma temperature at 1 mm high above the surface of A5083 alloy was determined by the Boltzmann plot method of atomic Cr lines of different excitation energy. The obtained electron temperature was 3, 280$\pm$150 K which was about 500 K higher than the boiling point of pure aluminum. The electron number density was determined by measuring the relative intensities of the spectra1lines of atomic and singly ionized Magnesium, and the obtained value was 1.85 x 1019 1/㎥.

• Journal of Forest and Environmental Science
• /
• v.17 no.1
• /
• pp.47-61
• /
• 2001

The study was carried out to suggest the development scheme of Forestry Association by the method of member's consciousness inclination analysis. The results are as follows ; 1. Most of Association members perceived the necessity for re-education about cooperative association, especially the research suitable to the characteristics of Korea Forestry. 2. 59.9% of members had negative response against revision of Forestry Association Law, and 39.5% of members had negative opinion about taking exclusive charge of forest working by Forestry Association, noting the need of immediate publicity activities for those charges. 3. Large number of members pointed out that the most serious problems for the management of private forest were the budgetary deficit and the lack of joint marketing system of forest products. 25.9% of members had complaints about the management of their own forests after joining the association. 4. 34.0% of members opposed Proxy Management and 48.8% of members wanted Portion Consignment System. 5. The analysis noted that due to increase of the aged in rural communities, it is necessary to establish Forestry Working Corps, which is under the control of the Government and Forestry Association to supply forestry labor in a appropriate time. 6. Most of Association members liked establishment of Special Association for each forest products.

• Journal of the Microelectronics and Packaging Society
• /
• v.22 no.2
• /
• pp.47-53
• /
• 2015

The effects of electroless nickel immersion gold (ENIG) and organic solderability preservative (OSP) surface finishes on the in-situ intermetallics reaction and the electromigration (EM) reliability of Sn-3.0Ag-0.5Cu (SAC305) solder bump were systematically investigated. After as-bonded, $(Cu,Ni)_6Sn_5$ intermetallic compound (IMC) was formed at the interface of the ENIG surface finish at solder top side, while at the OSP surface finish at solder bottom side,$ Cu_6Sn_5$ and $Cu_3Sn$ IMCs were formed. Mean time to failure on SAC305 solder bump at $130^{\circ}C$ with a current density of $5.0{\times}10^3A/cm^2$ was 78.7 hrs. EM open failure was observed at bottom OSP surface finish by fast consumption of Cu atoms when electrons flow from bottom Cu substrate to solder. In-situ scanning electron microscope analysis showed that IMC growth rate of ENIG surface finish was much lower than that of the OSP surface finish. Therefore, EM reliability of ENIG surface finish was higher than that of OSP surface finish due to its superior barrier stability to IMC reaction.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.15 no.2
• /
• pp.62-67
• /
• 2011

Launching tube is a kind of case to protect the guided weapons from external environments and conducted as a guide when they are fired. The guided weapons have been firmly kept at the launching tube and transferred, and would be separated at the required time when they are fired To meet the aim, it has been used explosive bolts which are reliable and efficient mechanical fastening devices having the special feature of a built-in release. The disadvantage of explosive bolt lies in that it is based on the high explosive effect of a pyrotechnic charge. When the explosive bolt is ignited, there are some bad effects; a flame, fragments and pyro-shock. Because of these bad effects there are many restriction to use bolt as joining devices to precision guided weapons. To solve these problems, the aim of the present work is to invent the ball-type separation bolt which is a pyrotechnically releasable mechanical linking device for two mechanical elements that does not suffer from such drawbacks. A standard pressure cartridge can moreover be easily integrated inside the device according to the present work and this with no modification to its structure. The present work was represented quantitatively the margin of separation safety and analysed separation mechanism in ball type separating bolt to perform the dynamic separation test.

• Journal of Digital Convergence
• /
• v.12 no.2
• /
• pp.335-341
• /
• 2014

To play the networked video contents in a client's mobile device in real time, the contents should be delivered to it by the contents server with streaming technology. Generally, in a server-client based commerce model, the server is in charge of both the authentication of the paid customer and distribution of the contents. The drawback of it is that if the customers' requests go on growing rapidly, the service quality would be degraded results from the problems of overloaded server or restricted network bandwidth. On the contrary, in P2P based networks, more and more the demand for service increasing, the service quality is upgraded since a customer can act as a server. But, in the P2P based network, there are too many servers to manage, it's possible to distribute illegal contents because the P2P protocol cannot control distributed servers. Thus, it's not suitable for commercial purposes. In this paper, the dymanic group authentication scheme is proposed which is suited to P2P based applications. The proposed scheme consists of group based key generation, key update, signature generation and verification protocols. It can control the seeder's state whether the seeder is joining or leaving the network, and it can be applied to hybrid P2P based commerce model where sales transactions are covered by the index server and the contents are distributed by the P2P protocol.

• Proceedings of the KWS Conference
• /
• 2010.05a
• /
• pp.51-51
• /
• 2010

Recently just as in the automobile industry, shipbuilders also try to reduce material consumption and weight in order to keep operating costs as low as possible and improve the speed of production. Naturally industry is ever searching for welding techniques offering higher power, higher productivity and a better quality. Therefore it is important to have a details research based on the various welding process applied to steel and other materials, and to have the ability both to counsel interested companies and to evaluate the feasibility of implementation of this process. Submerged-arc welding (SAW) process is usually used about 20% of shipbuilding. Similar to gas metal arc welding(GMAW), SAW involves formation of an arc between a continuously-fed bare wire electrode and the work-piece. The process uses a flux to generate protective gases and slag, and to add alloying elements to the weld pool and a shielding gas is not required. Prior to welding, a thin layer of flux powder is placed on the work-piece surface. The arc moves along the joint line and as it does so, excess flux is recycled via a hopper. Remaining fused slag layers can be easily removed after welding. As the arc is completely covered by the flux layer, heat loss is extremely low. This produces a thermal efficiency as high as 60% (compared with 25% for manual metal arc). SAW process offers many advantages compared to conventional CO2 welding process. The main advantages of SAW are higher welding speed, facility of workers, less deformation and better than bead shape & strength of welded joint because there is no visible arc light, welding is spatter-free, fully-mechanized or automatic process, high travel speed, and depth of penetration and chemical composition of the deposited weld metal. However it is difficult to application of thin plate according to high heat input. So this paper has been focused on application of the field according to SAW process for thin plate in ship-structures. For this purpose, It has been decided to optimized welding condition by experiments, relationship between welding parameters and bead shapes, mechanical test such as tensile and bending. Also finite element(FE) based numerical comparison of thermal history and welding residual stress in A-grade 3.2 thickness steel of SAW been made in this study. From the result of this study, It makes substantial saving of time and manufacturing cost and raises the quality of product.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.30 no.2
• /
• pp.210-216
• /
• 2003

The double teeth include gemination and fusion. The congenital missing tooth is the absence of the tooth. The purpose of this study was to investigate the prevalence of double teeth and congenital missing teeth in preschool children of Iksan city. The study population consisted of 1,031 children, 569 boys and 462 girls, aged from 17 to 84 months. The double teeth possess a variety of diagnostic and treatment problems. Gemination is the partial splitting of a single bud into two distinct entities that remain joined in a Siamese twin fashion. Fusion is the joining of two buds. Both may be normal, or one may be a supernumerary tooth. Congenital missing is the absence of one or a few teeth. Twenty three(11 boys and 12 girls) of the 1,031 children had double teeth and 17(8 boys and 9 girls) exhibited congenital missing of teeth. The prevalence of double primary teeth was 2.2%. The prevalence of congenital missing teeth was 1.6%. One subject had double teeth and congenital missing tooth at the same time. Of the 17 cases of congenital missing teeth, one girl showed it in the maxilla and aye boys and six girls had them in the unilateral side of the mandible. There were no significant differences in the prevalence of double teeth and congenital missing teeth between the boys and the girls.