• The Korea Journal of Herbology
• /
• v.28 no.4
• /
• pp.17-23
• /
• 2013

Objectives : The objective of the paper was to study cutting method of Gardeniae frutus, that tends to show symptom of separations in a packing, in accordance with the comparison experiment of quantification and antioxidant effect proceed with the intact Gardeniae fructus(Gf), seed of Gardeniae fructus (Gs) and the pericarp of Gardeniae fructus (Gp) separately. Methods : The Gf, Gs, and Gp were extracted using 80% MeOH, followed by quantizing geniposide contained in each group. A MTT assay was conducted and ROS generation and NO production were measured for comparing its antioxidant effect. Results : As a result of quantizing geniposide contained in the Gf, Gp, and Gs, respectively, the geniposide content was shown to be the highest in the Gs. MTT assay showed that no cytotoxicity was observed in the groups treated with Gf, Gp, and Gs, respectively, at a dose of 500 ${\mu}g/ml$. The ROS generation was shown to have more significantly decreased in the group pretreated with Gf 500 ${\mu}g/ml$ than in the group treated with LPS. The NO level was shown to have more significantly decreased in the group pretreated with Gp 500 ${\mu}g/ml$ than in the group treated with LPS. Conclusion : As the geniposide content and antioxidant effect of Gf varies according to its each part, it is recommended that Gf should be distributed as an intact form other than segregation in packing.

• Journal of Adhesion and Interface
• /
• v.23 no.2
• /
• pp.25-32
• /
• 2022

There has been a growing demand for water based-type PSA due to environmental regulations for solvent-type PSA. And accordingly, there is a growing expectation as well for tackifiers used to compensate for the problem of deterioration of physical properties. Therefore, In this study, water-based tackifiers were synthesized by changing the contents of hard and functional acrylic monomers CHMA, IBOA, and AA. And these were added to the pressure-sensitive adhesive at 10 phr and their physical properties were compared. Tackiness slightly decreased as CHMA increased and IBOA decreased. Since the intermolecular bonding force increased due to the increase in AA content, the lower the AA content showed better results. Peel strength increased as the tackifiers were added because the fluidity of the polymer chain increased. And higher AA content showed better results because more hydrogen bonds were formed. The holding power tended to decrease as CHMA increased because the content of IBOA relatively decreased which has a large influence on the holding power. And higher AA content showed better results.

• Economic and Environmental Geology
• /
• v.55 no.4
• /
• pp.339-352
• /
• 2022

As environmental criteria items are increased or strengthened, cases of heavy metal contamination by geogenic origin are increasing, and the need to distinguish between natural and anthropogenic origins in soil or groundwater exceeding the standard is increasing. In this study, geochemical occurrences of geogenic heavy metals were identified through statistical processing of the national geochemical map data and evaluation of geochemical characteristics of regions with high geoaccumulation indices. Cobalt, Cr, Cu, Ni, Pb, V, and Zn were targeted for which the national geochemical maps were prepared, and Co, Cr, Ni, and V derived from ultrabasic or ultramafic rocks were classified as factor 1. Copper, Pb and Zn of non-ferrous sulfide origin were classified as factor 2. In particular, enrichment of heavy metals by factor 1 occurs mainly in the serpentine distribution areas of the Chungcheong region, and there is a risk of contamination in neighboring areas. In the case of factor 2, geogenic occurrence is concerned not only in non-ferrous metal mineralization areas such as Taebacksan and Gyeongnam mineralization zones, but also in Au-Ag mineralization areas distributed nationwide.

• Composites Research
• /
• v.36 no.1
• /
• pp.53-58
• /
• 2023

The PIC design method is assigning different stacking sequences for each shell element through the preliminary FE analysis. In previous study, machine learning was applied to the PIC design method in order to assign the region efficiently, and the training data is labeled by dividing each region into tension, compression, and shear through the preliminary FE analysis results value. However, since buckling is not considered, when buckling occurs, it can't be divided into appropriate loading type. In the present study, it was proposed PIC-NTL (PIC design using novel technique for analyzing load type) which is method for applying a novel technique for analyzing load type considering buckling to the conventional PIC design. The stress triaxiality for each ply were analyzed for buckling analysis, and the representative loading type was designated through the determined loading type within decision area divided into two regions of the same size in the thickness direction of the elements. The input value of the training data and label consisted in coordination of element and representative loading type of each decision area, respectively. A machine learning model was trained through the training data, and the hyperparameters that affect the performance of the machine learning model were tuned to optimal values through Bayesian algorithm. Among the tuned machine learning models, the SVM model showed the highest performance. Most effective stacking sequence were mapped into PIC tube based on trained SVM model. FE analysis results show the design method proposed in this study has superior external loading resistance and energy absorption compared to previous study.

• BMB Reports
• /
• v.55 no.12
• /
• pp.609-614
• /
• 2022

Mutation of the gene for adenomatous polyposis coli (APC), as seen in Apc^Min/+ mice, leads to intestinal adenomas and carcinomas via stabilization of β-catenin. Transmembrane 4 L six family member 5 (TM4SF5) is involved in the development of non-alcoholic fatty liver disease, fibrosis, and cancer. However, the functional linkage between TM4SF5 and APC or β-catenin has not been investigated for pathological outcomes. After interbreeding Apc^Min/+ with TM4SF5-overexpressing transgenic (Tg^TM4SF5) mice, we explored pathological outcomes in the intestines and livers of the offspring. The intestines of 26-week-old dual-transgenic mice (Apc^Min/+:Tg^TM4SF5) had intramucosal adenocarcinomas beyond the single-crypt adenomas in Apc^Min/+ mice. Additional TM4SF5 overexpression increased the stabilization of β-catenin via reduced glycogen synthase kinase 3β (GSK3β) phosphorylation on Ser9. Additionally, the livers of the dualtransgenic mice showed distinct sinusoidal dilatation and features of hepatic portal hypertension associated with fibrosis, more than did the relatively normal livers in Apc^Min/+ mice. Interestingly, TM4SF5 overexpression in the liver was positively linked to increased GSK3β phosphorylation (opposite to that seen in the colon), β-catenin level, and extracellular matrix (ECM) protein expression, indicating fibrotic phenotypes. Consistent with these results, 78-week-old Tg^TM4SF5 mice similarly had sinusoidal dilatation, immune cell infiltration, and fibrosis. Altogether, systemic overexpression of TM4SF5 aggravates pathological abnormalities in both the colon and the liver.

• Journal of Adhesion and Interface
• /
• v.24 no.1
• /
• pp.26-35
• /
• 2023

Generally, solvent-type coatings generate a large amount of volatile organic chemicals(VOC), which are carcinogenic substances, in the manufacturing process, and their use is regulated due to environmental problems. There is also the problem of resource depletion due to limited fossil fuels. Therefore, in this study, UV-curable urethane acrylate oligomers were synthesized with different contents of isosorbide, which is a biomass material, and proceeded to evaluate the physical properties of coatings. As the isosorbide contents increased, the viscosity, glass transition temperature, tensile strength, stain resistance, and pencil hardness increased, but elongation and flexibility decreased, and BOI-3 showed the best adhesion. The isosorbide content of the oligomer fixed at 20%, UV-curable urethane acrylate oligomer was synthesized according to the content ratio of polycaprolactone diol(PCL) and Ecoprol H1000(Ecoprol). As the PCL/Ecoprol content ratio increased, the glass transition temperature, elongation, and flexibility increased, but the tensile strength and pencil hardness decreased. It was confirmed that the adhesion and stain resistance increased by improving the surface bonding strength of PCL. All films of oligomers synthesized were transparent without discoloration.

• Composites Research
• /
• v.36 no.4
• /
• pp.253-258
• /
• 2023

Although the development of transportation means has realized the right to mobility for the disabled who have difficulty in moving, it can be said that the improvement of the safety of passengers with disabilities that can occur in a car accident is lower than that of ordinary passenger seats. In particular, in the case of a rear-end collision that can occur suddenly, it is a reality that disabled passengers are vulnerable to head and neck injuries. Therefore, in this study, a multi-layer headrest foam that divides the headrest into three parts in the coronal plane was proposed to improve the head and neck injury index of disabled passengers in the vehicle in the event of a rear-end collision of a wheelchair transport vehicle. A range of stress scale factors was selected to give various compressive characteristics of the foam through low-speed rear-end collision analysis through a simple model, and GA optimization was performed by specifying the range as a parameter. Through the optimization result, the phase relationship between HIC and NIC was analyzed according to the compression characteristics of the layers. HIC responded most sensitively to the compression characteristics of the front layer and NIC responded to the compression characteristics of the mid layer, and the compression characteristics of the rear layer showed the lowest. A normal headrest and an optimized multi-layer headrest were placed in the validation model to analyze the low-speed rear-end collision sled test, and HIC and NIC were derived lower in the multi-layer headrest than in the general headrest. The compression behavior of the multi-layer headrest was also clearly shown, and it was verified that the multi-layer headrest was effective in improving the injury index of the head and neck compared to the general headrest.

• The Korea Journal of Herbology
• /
• v.24 no.3
• /
• pp.59-68
• /
• 2009

Objectives : Bupleuri Radix (Siho) is prescribed as the root of different Bupleurum species on the pharmarcopoeia in Korea and China. Moreover, other species and varieties of the genus Bupleurum have been also distributed on the herbal market as Bupleuri Radix. However, due to the morphological similarity and frequent occurrence of intermediate forms, the correct identification of this radix is very difficult. To develop a reliable method for correct identification and improving the quality standards of official Bupleuri Radix, we analyzed sequences of the ribosomal RNA gene and internal transcribed spacer (rDNA-ITS) region. Methods : PCR amplification of rDNA-ITS region was performed using ITS1 and ITS4 primer from 6 Bupleurum species and 1 variety, B. falcatum L. (Siho), an improved breed of B. falcatum L. (Samdo-Siho), B. chinense DC. (Buk-Siho), B. scorzonerifolium Willd. (Nam-Siho), B. longiadiatum Turcz. (Gae-Siho), B. euphorbiodes Nakai (Deungdae-Siho) and B. latissimum Nakai (Seom-Siho), and nucleotide sequence was determined after sub-cloning into the pGEM-Teasy vector. Authentic marker nucleotides were estimated by the analysis of ClastalW using entire rDNA-ITS sequence of three samples per species. Results : In comparative analysis of the rDNA-ITS sequences, we found specific nucleotides to distinguish Korean (B. falcatum L. and its variety) and Chinese official species (B. chinense DC. and B. scorzonerifolium Willd.) from others at positions 411 and 447, and positions 89, 101, 415 and 599, respectively. Futhermore, we also found nucleotide indels (insertion and/or deletion) and substitutions to identify each of different Bupleurum species, 2 positions for B. falcatum L. and its variety, 6 positions for B. chinense DC., 49 positions for B. scorzonerifolium Willd., 8 positions for B. euphorbioides Nakai, 7 positions for B. longiradiatum Nakai and 9 positions for B. latissimum Nakai. These sequence differences at corresponding positions are avaliable nucleotide markers to determine the botanical origins of Bupleuri Radix. Moreover, we confirmed the phylogenetic relationship of B. latissimum Nakai, a Korean endemic speices, among Bupleurum species based on the rDNA-ITS sequence. Conclusions : These marker nucleotides would be useful to identify the official herbal medicines by the providing of definitive information that can identify each plant species and distinguish it from unauthentic adulterant Bupleurum species.

• The Journal of Internal Korean Medicine
• /
• v.43 no.6
• /
• pp.1045-1062
• /
• 2022

Objectives: The aim of this study was to analyze the latest clinical studies on Korean medicine treatment of idiopathic thrombocytopenic purpura (ITP) in the Chinese National Knowledge Infrastructure (CNKI) database. Methods: We searched the last 6 years of clinical studies discussing Oriental medicine-based treatments for ITP in the CNKI database. A meta-analysis of 13 RCTs was performed by synthesizing the outcomes, including the measured platelet count and total effective rate. The quality of the studies was assessed using Cochrane's risk of bias (RoB) tool. RevMan 5.4.1 software was used for data analysis. Results: Of the 15 selected studies, 1 was a non-randomized controlled trial (nRCT), 2 were case series, and 12 were randomized controlled trials (RCTs). Treatments in all studies included oral herbal medicine. The most frequently used herbal decoction was the Liangxue Jiedu prescription (凉血解毒方), and the most commonly used herb was Agrimonia pilosa (仙鶴草), Astragali Radix (黃芪), Fossilia Glycyrrhizae Radix et Rhizoma (甘草), and Rehmannia glutinosa Liboschitz ex Steudel (地黃). The meta-analysis showed significantly better improvement in platelet counts and total effective rate for ITP in the treatment group than in the control group. Conclusion: Treatment with herbal medicine was effective in treating ITP. However, the significance of this conclusion is somewhat limited due to the low quality of the available studies. Multifaceted and scientifically designed clinical studies are required to develop treatments for ITP based on Korean medicine. The results of this study could be used as basic data for further ITP studies.

• Journal of Korean Medicine Rehabilitation
• /
• v.33 no.3
• /
• pp.149-160
• /
• 2023

Objectives This study is for reporting current status and strategies of thread embedding acupuncture (TEA) in temporomandibular joint disorder (TMD) using web-based survey. Methods Survey was conducted online via E-mail among Korean medicine doctors registered with the Association of Korean Medicine. The questionnaire is developed by Korean medicine doctor in Kyung Hee University Hospital at Gangdong. The survey consisted mainly of multiple-choice questions on the current status and strategies of TEA for TMD. Results Total of 427 doctors responded. TEA was mostly used for 'Cosmetic purpose and others' with 287 respondents (67.2%), and 102 respondents (23.9%) having experience with TEA for TMD. The most common purpose for TEA for TMD was 'Improving muscle contraction and tension' with 290 respondents (67.9%). The average interval was reported 2.12 weeks, and the most common response for the number of treatments was five sessions with 127 respondents (29.7%). The most common criterion for determining the treatment site was based on anatomical structure, accounting for 92.7%. The most effective anatomical structure was the 'Masseter muscle' with 83.1%, followed by the 'Temporal muscle' with 51.8%. TEA direction for TMD was dominant in 'affected side' for all muscles. Conclusions Through a survey, we can investigate clinical usage of TEA for TMD. This study can be helpful in creating standardized criteria for TEA on TMD in the future.