• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 1996년도 춘계 학술대회논문집
• /
• pp.58-67
• /
• 1996

This paper describes some computational results of various energy and environmental systems using Patankar's SIMPLE method. The specific topics handled in this study are jet bubbling reactor for flue gas desulfurization, cyclone-type afterburner for incineration, 200m tall stack for 500 MW electric power generation, double skin and heat storage systems of building energy saving for the utilization of solar heating, finally turbulent combustion systems with liquid droplet or pulverized coal particle. A control-volume based finite-difference method with the power-law scheme is employed for discretization. The pressure-velocity coupling is resolved by the use of the revised version of SIMPLE, that is, SIMPLEC. Reynolds stresses are closed using the standard $k-{\varepsilon}$ and RNG $k-{\varepsilon}$ models. Two-phase turbulent combustion of liquid drop or pulverized coal particle is modeled using locally-homogeneous, gas-phase, eddy breakup model. However simple approximate models are incorporated for the modeling of the second phase slip and retardation of ignition without consideration of any detailed particle behavior. Some important results are presented and discussed in a brief note. Especially, in order to make uniform exit flow for the jet bubbling reactor, a well-designed structure of distributor is needed. Further, the aspect ratio in the double skin system appears to be one of important factors to give rise to the visible change of the induced air flow rate. The computational tool employed in this study, in general, appears as a viable method for the design of various engineering system of interest.

• 한국수자원학회논문집
• /
• 제38권5호
• /
• pp.365-377
• /
• 2005

본 연구는 수력발전시설에서 물고기의 생존과 상해를 유도하는 흐름현상을 파악하기 위한 진보된 수치해석기법의 개발을 다루고 있다. 원형 젤의 LES를 실시하여 난류젤의 전단지역에 물고기를 방류하는 실험의 결과를 수치적으로 해석하였다. 이 연구에서는 순간 LES 흐름장이 유속, 압력 그리고 와도의 강한 변동으로 특성지울 수 있으며, 이것이 물고기에게 시간평균 정상류보다 상당히 큰 추진력과 모멘트를 발휘함을 보여준다. 이 연구는 아울러 수력터빈 드래프트관에서의 부정류를 RANS/LES의 혼성모형 즉 DES를 이용하여 해석하였으며, 물고기가 드래프트관내에서 방향감각을 상실하거나 과도하게 지체하도록 할 수 있는 난류가 발생함을 보여준다.

• International Journal of Aeronautical and Space Sciences
• /
• 제16권1호
• /
• pp.1-7
• /
• 2015

In order to provide some references for suitability of carrier-based aircrafts, this paper studies the flow field of exhaust jets and its impact on the flight deck. The geometrical models of aircraft carrier and carrier-based aircrafts are firstly built, on which unstructured tetrahedral meshes are generated for numerical analysis. Then, this paper simulates the flow field of exhaust jets to evaluate its impact on the Jet Blast Deflector (JBD) and the flight deck, when four carrier-based aircrafts are ready to start off in the bow. The standard k-${\varepsilon}$ equations, three-dimension N-S equations and the Computational Fluid Dynamics (CFD) theory are used in the analysis process. To solve the equations, the thermal coupling of the wind and the jet flow are also considered. The velocity and temperature distributions are provided with the simulation of the CFD software, FLUENT. The results indicate that: (1) this analytical method can be used to simulate aerodynamic problems with complex geometrical models, and the results are of high reliability; (2) the safety working area, the installation scheme of the JBD and the arrangement of the take-off position can be optimized through analysis.

• Transactions on Electrical and Electronic Materials
• /
• 제8권2호
• /
• pp.67-72
• /
• 2007

High Pressure Micro Jet (HPMJ) pad conditioning system was investigated as an alternative to diamond disc conditioning in copper CMP. A series of comparative 50-wafer marathon runs were conducted at constant wafer pressure and sliding velocity using Rohm & Haas IC1000 and Asahi-Kasei EMD Corporation (UNIPAD) concentrically grooved pads under ex-situ diamond conditioning or HPMJ conditioning. SEM images indicated that fibrous surface was restored using UNIPAD pads under both diamond and HPMJ conditioning. With IC1000 pads, asperities on the surface were significantly collapsed. This was believed to be due to differences in pad wear rates for the two conditioning methods. COF and removal rate were stable from wafer to wafer using both diamond and HPMJ conditioning when UNIPAD pads were used. Also, HPMJ conditioning showed higher COF and removal rate when compared to diamond conditioning for UNIPAD. On the other hand, COF and removal rates for IC1000 pads decreased significantly under HPMJ conditioning. Regardless of pad conditioning method adopted and the type of pad used, linear correlation was observed between temperature and COF, and removal rate and COF.

• 대한화학회지
• /
• 제36권2호
• /
• pp.273-281
• /
• 1992

원자흡수분광법을 위한 글로우방전 분광 장치를 sputtering된 시료원자가 기저상태의 원자가 최대이며 여기 상태의 원자가 최소가 되는 지역을 측정하도록 설계 개발하였다. 빠른 속도의 가스 jet는 방전의 육안 및 전기적 변화 뿐만 아니라 시료표면의 변화에서 처럼 시료가 원자화되는 양을 현저히 증가시킨다. 가스 jet는 원자흡수분광법으로 시료를 직접할 수 있는 가능성을 보여주었다. 감도와 재현성에 영향을 끼치는 여러 가지 요인들에 관하여 연구하였다.

• 대한조선학회논문집
• /
• 제35권4호
• /
• pp.11-18
• /
• 1998

본 논문은 복합지지형 초고속 화물 시험선인 "나래"호에 장착된 물분사 추진장치에 대한 해상성능시험에 대하여 기술하였다. 물분사 추진 장치에서 제트 속도, 임펠러에 걸리는 추력 및 토오크 계측 방법에 대해 설명하였다. 해상성능시험 결과로부터 물분사 추진장치의 성능을 분석하였고, 1996년에 수행된 유사 물분사 추진장치 모형시험 결과와 비교하였다. 해상성능시험로부터 추정된 유효마력은 모형선 결과와 좋은 일치를 보여준다. 시험선의 최적 부상 높이는 0.75m로 추정되고 물분사 추진장치의 준추진효율은 15노트에서 0.315으로 추정되었다. 본 시험을 통하여 펌프의 성능, 제트 효율, 유입부 덕트와 노즐에서의 손실 등에 관한 유용한 자료를 확보하였으며, 모형시험 결과와 유사한 경향을 보여주었다.

• 한국안전학회지
• /
• 제31권3호
• /
• pp.22-27
• /
• 2016

The use of electromagnetic wave has been interested in various energy industry because it enhances a flame stability and provides higher safety environments. However it might increase the pollutant emissions such as NOx and soot, and have harmful influence on human and environments. Therefore, it is very important to understand interaction mechanism between flame and electromagnetic wave from environmental point of view. In this study, an experiment was performed with jet diffusion flames induced by electromagnetic wave. Microwave was used as representative electromagnetic wave and a flickering flame was introduced to simulate the more similar combustion condition to industry. The results show that the induced microwave enhances the flame stability and blowout limit. The unstable lifted flickering flames under low fuel/oxidizer velocity is changed to stable attached flames or lift-off flames when microwave applied to the flames, which results from the abundance of radical pool. However, NOx emission was increased monotonically with increasing the microwave power as microwave power increased up to 1.0 kW. The effects might be attributed to the heating of combustion field and thermal NOx mechanism will be prevailed. Soot particle was examined at the post flame region by TEM grid. The morphology of soot particle sampled in the microwave induced flames was similar to the incipient soot that is not agglomerated and contain a lots of liquid phase hydrocarbon such as PAH, which soot particle formed near reaction zone is oxidized on the extended yellow flame region and hence only unburned young particles are emitted on the post flame region.

• 한국수자원학회논문집
• /
• 제52권2호
• /
• pp.115-123
• /
• 2019

잠기지 않은 수제 하류의 3차원 흐름구조에 Froude 수 변화가 미치는 영향을 알아보기 위한 수리모형 실험을 수행하였다. 3가지 Froude 수 조건에 대하여 초음파 유속계와 수위계를 이용하여 3차원 유속과 수심을 측정하였다. Froude 수는 시간평균유속 및 난류 특성의 전반적인 분포에는 크게 영향을 미치지 않는 것으로 나타났다. 그러나 Froude 수가 증가할수록 수제 위치의 흐름단면이 감소하고 제트 흐름 강도의 증가가 관찰되었다. 이 제트 흐름은 단면 내 최대 난류에너지 발생의 위치를 안쪽 제방으로 이동시키는 것으로 나타났다.

• 한국터널지하공간학회 논문집
• /
• 제20권2호
• /
• pp.305-315
• /
• 2018

본 연구에서는 도로터널의 횡류환기 및 반횡류환기 방식의 설계 방안을 도출할 목적으로 수치해석적인 방법에 의해서 환기특성을 고찰하고 소요환기량과 환기 시스템 용량의 관계를 검토하였으며, 다음과 같은 결과를 얻었다. 급 배기 횡류환기방식에서 환기시스템의 급 배기풍량은 이론적으로 소요환기량과 자연환기량의 차가 되나, 해석결과에 의하면 환기시스템 용량은 소요환기량과 자연환기량의 차보다 약 10%정도 증가하는 것으로 나타나고 있다. 또한 제트팬을 설치하여 종방향 풍속을 증가시키는 경우, 환기시스템의 급배기 풍량은 감소하나, 터널풍속이 증가할 수록 터널 내 농도가 감소하기 때문에 오염물질에 대한 배기효과가 감소하여, 횡류 환기시스템의 용량 감소효과는 감소하는 것으로 나타나고 있다. 급기만 하는 반횡류식에서는 터널입구 풍향이 차량진행방향과 반대인 경우에는 환기시스템의 급기풍량은 소요환기량과 동일하나, 해석결과에서는 약 13.3% 이내의 범위에서 증가하는 것으로 나타나고 있으며, 터널입구 풍속이 음수인 상태에서는 제트팬 댓수를 증가하여 도 환기효과는 기대할 수 없는 것으로 나타났다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2004년도 춘계학술발표회
• /
• pp.137-145
• /
• 2004

Limestone zone in korea have been distributed to diagonal line so that it is wide from the Gangwondo to the Jeonlanamdo. The limestone cavity and fractured zone were formed by chemical weathering. Limestone cavity and fractured zone was reinforced with cemented milk(w/c=60%)by high pressure jet grouting by tripple -pipe to establish bridge foundation on the ground condition like limestone cavity. To analyze property of limestone and solid of cement milk(w/c=65%), mixed solid of cement, core NX size in the limestone cavity and fractured zone and compressive strength. Seismic tomograpy exploration was pcrforn1cd to analyze deformation modulus of limestone. The analysis suggests that deformation modulus of limestone has effect on uniaxial compressive strength, seismic velocity, seismic elasticity modulus. Average static elasticity modulus of limestone is $5.08{\times}10^5kgf/cm^2$, cement and coal mixed solid is $0.25{\times}10^5kgf/cm^2$, $0.095{\times}10^5kgf/cm^2$. Average seismic velocity of limestone is 5.240m/sec, cement and coal mixed solid is 2,211.3m/sec, 1,447.5m/sec. Average uniaxial compressive strength of limestone was $1,221.3kgf/cm^2$ and limestone specimen mixed with cement milk and solid of cement milk mixed with coal were $125.22kgf/cm^2$, $35kgf/cm^2$ each other. Average friction angle of limestone was $49.14^{\circ}$ and limestone specimen mixed with cement milk and solid of cement milk mixed with coal were $38.39^{\circ}, 25.83^{\circ}$ each other. Average cohesion of limestone was $137.7kgf/cm^2$ and limestone specimen mixed with cement milk and solid of cement milk mixed with coal were $23.5kgf/cm^2$, $15.5kgf/cm^2$ each other. Average deformation modulus of limestone was $2.84{\times}10^5kgf/cm^2$ and limestone specimen mixed with cement milk and solid of cement milk mixed with coal were $0.4{\times}10^5kgf/cm^2, 0.12{\times}10^5kgf/cm^2$ each other. It was analyzed that the elasticity and uniaxial compressive strength, seismic velocity of solid of cement milk mixed limestone pieces and coal had an highly interrelation regardless of existence of limestones pieces and coal but it had shown that limestones had an lower interrelation. In case of field seismic velocity and deformation of limestone, SIC solid of cement milk mixed with coal and limestone pieces had an highly interrelation.